Range Rover P38 & Discovery 2 Ball Joints removal/refit -short video
ฝัง
- เผยแพร่เมื่อ 2 เม.ย. 2024
- This a cut down video of my step by step on how to change the front ball joints.
Full a full step by step please go to: • Range Rover P38/Discov...
I hope this helps you out.
Nice thanks for the video
No problem 👍
Good effort. It is hard to do the first time round, I just did one of mine. Not so worried about the next one.
Thank you, I agree first time this job took me two days but when you work out where to apply the pressure and the best way its easy. Good luck with yours for the other side.
Any video on taking off the hub carrier as I have seen many people struggling with getting them off,,
Many thanks Chris
Hi Chris, it's covered in my full video attached to the end of this one. They can be a pain to get off.
@@LandyManLewis many thanks for your reply ,, is it possible to just replace the bottom ones?
Chris
I guess so but if ones gone I would swap both anyway. Its easier with the top one removed to get the clamp in.
Nice and easy !
Is that tool the same as the £30 ones on eBay ?
It is indeed, but I bought this about 5 years ago. it's been put through it paces.
P R O M O S M 😞