Thanks . Trying to replace a battery in an old Philips Sensotouch 3D was a nightmare and failed with all plastic clips that broke. Seeing your video i will choose this model as i prefer to repair than to change a device. Thanks a lot for your video 👏.
Two screws, one either side of the motor, the whole shave head and motor pull out, remove the stainless clip and pull motor up and back and its clear, watch when you refit motor, the ball needs to sit in the correct slot.
I have some problem.... After i place the battery and assembly everything together its seems that the light was shown but the motor still not working in that time...... Should i recharge it?? Im curious because its not even have a sound like its always does
The length from top to bottom is 54.05mm, the width is 18.25mm, and the capacity is 1300mAh, 3.7v. www.ebay.com/itm/164156118456 I think this will fit, but you'll have to check the size and capacity yourself.
The length from top to bottom is 54.05mm, the width is 18.25mm, and the capacity is 1300mAh, 3.7v. www.ebay.com/itm/164156118456 I think this will fit if you use exactly same one, but you'll have to check the size and capacity yourself.
I have to replace my Braun Shaver 5751 battery and your guidance helped a lot thank you.
Thanks . Trying to replace a battery in an old Philips Sensotouch 3D was a nightmare and failed with all plastic clips that broke. Seeing your video i will choose this model as i prefer to repair than to change a device. Thanks a lot for your video 👏.
Thanks for a good guide, changed the battery on my 5030s, and it works again like a charm!
What type of screw driver pleas let me know
I have another question: the Braun shavers: series 5,7,8 and 9 all use the same battery?
Hi, very good guide 👍. Thank you very much for it. Useful as well for my Braun 5090cc, series 5.
How do you change out the motor head?
Two screws, one either side of the motor, the whole shave head and motor pull out, remove the stainless clip and pull motor up and back and its clear, watch when you refit motor, the ball needs to sit in the correct slot.
Danke , das Video war sehr hilfreich 😀👍
Thanks. Man the Germans are rough with their serviceability, just like the cars. That was damn near knee surgery.
Vielen Dank👍, beste Reparaturanleitung die ich gefunden habe👌! Thank you so much👈!
I have some problem.... After i place the battery and assembly everything together its seems that the light was shown but the motor still not working in that time...... Should i recharge it?? Im curious because its not even have a sound like its always does
series 521 I have doesn't have a screw in the bottom etc.
How to re insert the board ?
Where do I find this screwdriver type
Its torx.
Hard to find this type of screwdriver
Its mini torx, T6 and T9 are the sizes you will need.
Hi, thanks for the video, what is the battery type?
The length from top to bottom is 54.05mm, the width is 18.25mm, and the capacity is 1300mAh, 3.7v.
www.ebay.com/itm/164156118456
I think this will fit, but you'll have to check the size and capacity yourself.
Czy S8 ma tą samą baterie
Hi. Do you know what the model of battery I would need to order for this razer is? I have the exact same razor.
The length from top to bottom is 54.05mm, the width is 18.25mm, and the capacity is 1300mAh, 3.7v.
www.ebay.com/itm/164156118456
I think this will fit if you use exactly same one, but you'll have to check the size and capacity yourself.