Best aluminum advice I can give is clean it. Like laboratory clean. Sand paint off with new disks. (If you sanded steel with it previously, it will embed particles.) Candle wax makes sanding easier. Wipe everything down with acetone after. You can run those smaller tungsten rods, but you need a liquid cooled torch. They make aftermarket coolers for air cooled units like yours. Keep going, you're doing fine. CLEAN THE SH*T OUT OF IT!
Yeah I did the same thing with a stock Camry manifold - cut it off at the runners and flipped it around to make it forward facing. Worked fine with a brace to the block, I used a budget mig setup to weld it though.
FYI looks like your trying to get it to hot to fast. Slow down create puddle then flow it. Went to school for welding all 3 processes an Tig and Alum where my fav to do.
I run 3/32 Layzr tungsten at 175amps AC tig. If you let the torch cool for 20-30 min after each 2-3 inch pass its doable with an aircooled 17 torch. But I loved the intro on this video :D@@caseyscustoms2
And I have gathered from watching your videos and how hard you are on tools that your dad gave you shit for more than checking the oil on the compressor.......lol😊
I was thinking of starting a channel and I would be uploading cool guy stuff like working on my junker 99 Sonoma v8 project, bbqiing and hunting / gun reviews. But hands down Casey has some of the coolest projects out there. Cheers 🇨🇦
Blade needs changed from all the roll cage work over done and i figured it would just make a mess of it. Brand new sawzall blade ripped right though perfectly
The bad part is where you cut it there is no chance of smoothing out the inside so the intake works properly you should have cut it closer to flange and used old intake and bolted the two together so no distortion when welding but I'm definitely not a aluminum welder that's what I'd do with steel
That's awesome. That flip fit was perfect. 👌 Can't believe you're not at 100,000 already. Started my channel last October. Almost at 7500. Thanks for the inspiration brother.
You have to modify the hell out of an s2k intake to fit a k24 from what I’ve seen. Also s2k intake is like 300, so if i have to cut one I’m cutting a cheap one lol
please bro for your own sake don’t wear gloves when grinding/cutting if a disk catches your skin it will cut but if it catches your glove it will be a messy cut, each to their own but just something I’ve learnt from experience ahah
Can't tell if Casey is just trolling everyone by calling it a K two four instead of a K twenty-four or just if no one has told him yet... My bet is on the trolling
Watching him weld was so cringe. There is so much he did wrong that made things more difficult for himself. The biggest mistakes were 1 you don't want any gaps 2 always bevel your material if you plan on blending it 3 never remove the torch until the post flow has stopped. This is basic info for any tig welding.
Remember people this guy is a joker and just makes meme videos for click bait here on TH-cam. He has no real skill set when it comes to tig. Amazingly funny video if you wanna learn what not to do.
Green tungsten it will hold the heat so you can weld the aluminum
TOTALLY AWSOME VIDEO CASEY!!! THANKS FOR SHARING!!!! I LEARNED A LOT.
Best aluminum advice I can give is clean it. Like laboratory clean. Sand paint off with new disks. (If you sanded steel with it previously, it will embed particles.) Candle wax makes sanding easier. Wipe everything down with acetone after. You can run those smaller tungsten rods, but you need a liquid cooled torch. They make aftermarket coolers for air cooled units like yours. Keep going, you're doing fine. CLEAN THE SH*T OUT OF IT!
LIKE THE VIDEO!!
And you haven't thrown a hammer in a long while either
Don’t yell at me 😢
@@richlucasjr9116that’s a good point…
LIKE MY COMMENTS. 😂
He threw a turbo at a windshield @@richlucasjr9116
Yeah I did the same thing with a stock Camry manifold - cut it off at the runners and flipped it around to make it forward facing. Worked fine with a brace to the block, I used a budget mig setup to weld it though.
ABS pipe from Home Depot works, too, if you have an injector plate.
My dad and I built one for my honda D17
CASEY, I LOVE YOUR SECOND CHANNEL.
Your blatant insanity is inspiring!
I always enjoy these videos, I want to do stuff like this with cars in the future, seems kinda complicated though 😅
Buy a cheap "junker" and start cutting it up..or start small on your own car!
Second channel kicks..... Good Job, "BEST ALUMINUM WELDER IN THE WORLD!"
I haven't tried to tig aluminum yet. Thanks for the advice and thanks for sharing with us.
THANK YOU, EBAY!!!!
Love the 2nd channel
🙌🙌
I believe Aluminum (surface) distributes heat where Stainless holds heat... I am open for correction.
Another great video keep um coming
FYI looks like your trying to get it to hot to fast. Slow down create puddle then flow it. Went to school for welding all 3 processes an Tig and Alum where my fav to do.
I use 5/32 tungsten gray for welding all my aluminum at 200 amps on my primeweld Tig 225x....
I think i only had 3/32nd and a tiny piece of 1/8. The ones i had that i called 1/4” were actually 3/16th but didn’t have a collet to fit
I run 3/32 Layzr tungsten at 175amps AC tig. If you let the torch cool for 20-30 min after each 2-3 inch pass its doable with an aircooled 17 torch. But I loved the intro on this video :D@@caseyscustoms2
Using dish soap help to keep the blade clean from aluminum build up on cutting disk
Where are the videos of putting this motor In? I watch both channels and I haven't seen any videos of this motor being put in
Being timeline challenged is a feature of Casey’s Creative Chaos. 😂 presumably coming out on the main channel in the future.
I don't know s#i+ about welding aluminum so, as far as I know you're brilliant at it! 😅
thank you for that i now know that i am a master welder now all i need to do is get some sunglasses and some marine batteries
And I have gathered from watching your videos and how hard you are on tools that your dad gave you shit for more than checking the oil on the compressor.......lol😊
Is it pretty?
No.
Does it work?
Yes.
Are you the best welder ever?
Probably.
Love it man!
See,told you I watch them all. Channel one and two and facebook. Sooooooo......lol
Love that 86!
Breh, thanks for that idea. Wasn't trying to buy a s2k intake.
G'day from Brooksys channel!! 🙂
I was thinking of starting a channel and I would be uploading cool guy stuff like working on my junker 99 Sonoma v8 project, bbqiing and hunting / gun reviews. But hands down Casey has some of the coolest projects out there. Cheers 🇨🇦
My dad and I did a similar project on my honda race car and it seemed like it would have been a good task for a reel MIG gun.
As opposed to a fayk one? Just kidding, spoolguns are awesome, use the softer wire on unknown aluminum composition, they work awesome
@@kalybnielsen4183 😁
I've only used one once, but I thought it was great
Good stuff. Now its tacked in place... jb weld the rest
bro u need a stand up band saw
Hey man Looks like you were welding on dc instead of ac I hope this helps
Jack of a
Trade Goog job 😊
I just gotta wonder why you could have just cut the end off and relocated the inlet
Hope that zoom in at 6:45 was to remind Casey he has that portable bandsaw…a tool that would be perfect for these type a jobs 😂
I HEAR WELDING ALUMINUM IS VERY HARD TO DO. SO, THIS IS A VERY CHALLEGING JOB. NO JOKE.
Can't believe you didn't cut that with your portaband
Blade needs changed from all the roll cage work over done and i figured it would just make a mess of it. Brand new sawzall blade ripped right though perfectly
The bad part is where you cut it there is no chance of smoothing out the inside so the intake works properly you should have cut it closer to flange and used old intake and bolted the two together so no distortion when welding but I'm definitely not a aluminum welder that's what I'd do with steel
I think they feed some welding gas on the inside, idk sure
That’s for stainless steel welding, it’s called purging
@@CaseysCustoms Yup, you're correct.
Just weld it some and finish it with JB weld and paint, it'll be fine.
That's awesome. That flip fit was perfect. 👌 Can't believe you're not at 100,000 already. Started my channel last October. Almost at 7500. Thanks for the inspiration brother.
Casey's K Trueno 💯
#F___Politics
GTA 4/5 "KARIN FUTO" pays homage to the AE86/Hachi-Roku... IYKYK.
Getter Duuuun
You should have put a rod to fill the huge gap... then be able to weave and feed without having such a huge gap
You should stream working on one of the cars sometime, that could be cool!
Could have just ordered one from an s2000. But if wemust be crazy, you could have just cut it at the flange...would have been easier...js
You have to modify the hell out of an s2k intake to fit a k24 from what I’ve seen. Also s2k intake is like 300, so if i have to cut one I’m cutting a cheap one lol
This car needs a TURBO!!
I need the music in this video
That's what she said
Back purge
And like every video sooooooo...... slow your roll before you get a ticket lol😊
It's like Puddin's Fab Shop say's It'll work or it Won't.
Trolling us again, Chassey? That's okay, we know you'er just joking. Fairly okay aluminum welding job.
Where's your shielding gas (Argon)
I swear his such a troll that K-2-4 bugs the shit out of me for no reason
Makes me happy. I used to constantly say Porsche wrong and people would get so mad 🤣
@@caseyscustoms2😂
Same 😂
I was telling my wife I’m watching the best aluminum welder in the world and she just doesn’t give a sh*t. Women.
Sometimes they can’t see greatness when it’s right in front of their face.
Women! You can't live with them, you can't trade them in when they start to malfunction
Dang it wish I could help I am a contract piece rate tig welder of six years
Casey what's your gamer Tag ? Let's run some COD!
I thought the same thing! 😂 I can't believe he plays COD!
👊👊👊👊👊👊👊
Hey I need some tiginnn done hmu ..na but for real man love everything you do man
Please Please weld on Bidens airplane Please!!! 😂😂 🔥🛩🔥🤣😂
just do a 3rd channel called Casey's JDM Customs...
65$?! wow thats basically a cheap dinner date!
I'm sure SOMEONE would pay you to weld on the president's plane.......😅😅
😂👍
You may not be the best aluminum welder but your not the worst either lol
Your tungsten stickout is too far no so gas coverage thats why the tingsten is glowing. Keep the argon flow at 15-20 cfm. You dont need big tunsten.
i am once again begging you to stop calling it a k2-4, ITS TWENTY FOUR, all love tho
please bro for your own sake don’t wear gloves when grinding/cutting if a disk catches your skin it will cut but if it catches your glove it will be a messy cut, each to their own but just something I’ve learnt from experience ahah
You may not be the best aluminum welder but I know you are not the worst either. I probably hold that dubious distinction.
Hoda 2000 intake.
I HATE welding aluminum, it's such a 'finicky' bitch to weld!
You got your welder set WRONG !!!!!!!!!!🤣
Can't tell if Casey is just trolling everyone by calling it a K two four instead of a K twenty-four or just if no one has told him yet... My bet is on the trolling
2jz
Why do big dudes want small cars??! Lol
Watching him weld was so cringe. There is so much he did wrong that made things more difficult for himself. The biggest mistakes were
1 you don't want any gaps
2 always bevel your material if you plan on blending it
3 never remove the torch until the post flow has stopped.
This is basic info for any tig welding.
Remember people this guy is a joker and just makes meme videos for click bait here on TH-cam. He has no real skill set when it comes to tig. Amazingly funny video if you wanna learn what not to do.
🫡 TO YOUR EDITOR! HE'S IS A 🐐! #Trump2024!
Can he actually be president I thought it was max 2 year term genuine question
@@monibo7075 two terms means serving 8 years as president. He only had 1 tern (4 years)
@@TheOnlyBlackInMeWasWillieBrown okay I thought he did his two already,
@@monibo7075are you 14? Or younger?
TRUMP FOR PRISON 2024
unsubscribe....
The youth call the engine a (K) (24)
Not a K, 2, 4. 🫡 Thanks for coming to my TED talk.
It’s almost like i say it that way to troll people. 😳