ToT! NOT standard threaded ends, so that standard fittings can be used! Use unconventional left handed threading, so that fittings are proprietary, and can only be sourced from you at great cost!
Michael Harris - it's your fault you ruined your phone. Tony obviously didn't use water. Might need to try with one of those water proof cases next time. J/k, lol.
I got an iPhone 5 that constantly keeps hanging up itself and freezes the screen for a minute or so. So, I'd recommend something newer to prevent you from freezing all the time and therefore maybe ruining your material for stopping the sanding process and having to start again. Also, the files that I use don't really work, takes like hours until I see some results. Did someone make experiences with these "audio files" everyone is talking about? Are they comparable to an air file? I might try these for better results. Napster does file sharing, right? I wouldn't wanna buy them and then realize they don't work as good as expected, so borrowing some would do the trick first. Ultima ratio I'd consider watergate files. They remove everything, including governments, I heard. But since I'm a beginner still, I might start with some less expensive tools...
I really enjoy the little extra things you throw in there. Cutting the aluminum with the scissors, using the sandpaper on the phone, the recoil of the air gun, the using of the calipers to zoom in. Its those little touches that really make your videos that much more enjoyable to watch.
Your videos are some of my very favourite on TH-cam! Great projects, great explanations and awesomely solid dad humor! The kick from the airgun almost had me spewing my morning oatmeal out onto my laptop! You are an absolute hero!
Fun fact: If you have anything, and I mean ANYTHING that resembles "brass knuckles" in Pennsylvania and the police find it in your possession (and I don't mean you carrying them, they can just be in your vehicle) you will have to fight a felony charge of "manufacturing weapons". Even if they are a toy belt buckle. A person I know was pulled over and he had the belt buckle version laying on the floor of his truck because it broke off his belt. These things just looked like brass knuckles, they wouldn't even fit a child's hands. The police arrested him on the spot and it took him 5 years to fight it and get off probation after having it dropped to a misdemeanor "manufacturing weapons charge".
HTR, your vids have been awesome of late. The paper cutter was superb. Is there a follow up with the tool you restored for Mr Diresta? He's not mentioned / shown it yet.
Thank you! I found a hairline crack in the cylinder that was allowing air to enter and causing the drill to not run properly. I need to either fix it or find a replacement at some point. I sent Jimmy the Cutawl I restored as a thank you.
Man, I am constantly impressed at your talent. Not just your crafting skills, but the unique sense of humor and comedic timing you are able to imbue in to your videos. They make for a perfect video.
Exactly why you're my favorite TH-camr...not sure if it's the aluminum cutting scissors, the cell phone sandpaper, the caliper zoom (combined with your impressive design/machining skills) - your videos are pure awesomeness. I learn something from each one. THANKS!
Yeah man, the YT maker / machinist world is fuckin awesome. To the "professionals" they may seem like hacks but for the average guy like me, I look up to them. I wish I had the facilities to do a quarter of the stuff they can do, but I'm happy watching cause they are maing shit, not just talking about making shit. There's too many YT maker guys to mention, and it's effin awesome.
There's one thing that I'm sure of now, YOU are the guy that all of your friends want to hang with ! Got the skills and the humor AND the personality,........ just don't run for any kind of public office, that might mess you up in the head ! 😆 That sandpaper app would come in handy, but I think I liked it better with the texture, looks good anyway! 👍👍 Thanks for sharing and take care.
Every episode I watch of TOT makes me realize that if he wasn’t bound to the confounds of his containment unit he would literally take over the world. He’s too powerful.
Your videos are always fun, but much more than that, they teach and educate. The combination of the two is what is needed in School Teachers these days. Cheers.
I have really been loving your content! I binge watched all of your videos over the past few days. I have to say you are one of my favorite people on youtube for your humor, video editing skills, and wonderful use of machines. Hopefully I will be able to learn more from you in the future too!
The offset put me in mind of a split line in a sand casting. Nicely done. I'm sure Jimmy was liking it because that's the kind of guy he strikes me to be and I can see his comment.... Thanks for the video.
A This Old Tony and Diresta colab... awesome! I love it. Both of you are my favorite people on TH-cam, as well as my undeclared mentors. Keep up the amazing work. I love you both
It's wonderful watching my Hero building something for our Lord & Savior. Tony, you mentioned not knowing what direction the channel is headed lately... It's upward. Your videos get better every time you produce one. Thank you for making us feel welcome into your temple.
Thanks Tony and Jimmy...looking forward to the cad and Jimmy's video(s). Interesting to bring the sketch in and trace off of it...have done it in AI and exported to acad. Would like to know more about how the port diameters and spool valve diameters were fingered, earballed or enginerded for specific flow and noise levels. Glad no one was hurt in the making of the knuckle blow gun proto and hope that sanding app doesn't get butt dialed...might be hard on the fingers and knuckles. Perhaps the final version could have a magazine of tips that ratchet into place and a slightly tapered spool valve for even more control. Always a pleasure to be able to watch class acts. ~PJ
Just started watching your channel and now subscribed. You have a gift! You have the ability to give great instruction AND with a great sense of humor! I watch about 2 dozen machinist/build channels on TH-cam and I think you do the best graphics and clear camera work out there. Thanks for sharing!
You might've already considered this, but I'd drill a hole somewhere (maybe through the top of the shuttle) to vent that spring chamber. If the leak rate at the bottom oring is higher than the middle oring, pressure will eventually build up in the spring chamber and give you the effect you mentioned initially with the two oring design. It really doesn't make much of difference since you'll notice it right away and can just replace the seal, but coming from a paintball gun design background, that sealed spring chamber doesn't sit quite right with me.
Your editing made it look like you drilled and tapped for the inlet and nozzle, put in the valve, and air flowed through solid aluminum. I would have expected drilling those long air passages would be a challenge and wanted to see if you used any tricks to do it.
Neat! I bet the x error in the CNC routering was due to a variation in the length of the stock, that'd be easy to slip by. Maybe your scissors need sharpening?
As usual, it's been a "blast" watching your video. Thanks for the laughs and the idea for a new blow off tool. Great stuff man. I do truly enjoy watching these.
Dang Tony, your delivery, sense of humor and overall content make your videos such a pleasure to watch. Thank you for taking your time to produce these videos. When you called Jimmy a "kid" I almost lost it from laughing then realized y'all got it like that. It's awesome to see the comradery .
I was a bit late to the ToT party but I was instantly addicted. To feed this addiction I started watching the older vids and just have to say the progression in production quality in your vids is amazing. All the while staying true to your original humor and style. Bravo!
This is awesome, its so rare to find this kind of videos where the project progress from conceptual design to working prototype. I'll sure be watching the follow up video.
Lovely, Good & Nice Piece. You Tack back nature at your home and Caressing our eyes, you do in very Special Way wich is never boring. You are a very Good Teacher & You understand Art . Thank you Mr. Tony :)
Hi Tony, For the 3rd o-ring to really work, there must be a relief hole for releasing any minuscule quantities of air that do cross it. Have a drip for long enough and you can fill a bucket. And when the bucket overflows, that shuttle-pin *will* fly across the room ;) The leak could be to the outside (near the middle finger-hole) or to the output-hole (by means of a bore through the valve-shuttle). Cheers!
So so good!!! mad love and respect ✊
Hi mate. You expected anything else? This man is good.
Marcel Timmers excellent as expected
Excellent and totally entertaining.
jimmydiresta indeed one In my life when will they be available, great idea for a collab between you both
Can I have the prototype :D I love both your channels!
ToT! NOT standard threaded ends, so that standard fittings can be used! Use unconventional left handed threading, so that fittings are proprietary, and can only be sourced from you at great cost!
Thanks a lot Tony! I downloaded the same app to save a little on abrasives, and long story short, you owe me a new phone.
Michael Harris could you provide me the Playstore link ? ;)
Michael Harris - it's your fault you ruined your phone. Tony obviously didn't use water. Might need to try with one of those water proof cases next time. J/k, lol.
virtual sand paper can be purchased thru Charmin
Works ok for me, but I found the deburring app works better on iOS...
I got an iPhone 5 that constantly keeps hanging up itself and freezes the screen for a minute or so. So, I'd recommend something newer to prevent you from freezing all the time and therefore maybe ruining your material for stopping the sanding process and having to start again.
Also, the files that I use don't really work, takes like hours until I see some results. Did someone make experiences with these "audio files" everyone is talking about? Are they comparable to an air file? I might try these for better results. Napster does file sharing, right? I wouldn't wanna buy them and then realize they don't work as good as expected, so borrowing some would do the trick first.
Ultima ratio I'd consider watergate files. They remove everything, including governments, I heard. But since I'm a beginner still, I might start with some less expensive tools...
Tools, humor, and camera trickery...my favorites!!
I really enjoy the little extra things you throw in there. Cutting the aluminum with the scissors, using the sandpaper on the phone, the recoil of the air gun, the using of the calipers to zoom in. Its those little touches that really make your videos that much more enjoyable to watch.
not gonna lie... that test shot and glass noise 15:09 got me! My heart jumped!
yes ! , then i almost peed laughing hahahah
Indeed! Total LOL moment. Watched it a few times just for the pure enjoyment of it all.
i almost died laughing...
I'm late here but man I'm dying LOL 😂
I have chronic heart failure.
This is one of those "Why is this a product already?" Ideas. So awesome! Great video too.
Man, I love your videos, Tony! You're one of the few creators whose content is worth going back to past episodes and watching!
Seconded!
I laughed way too hard at the sandpaper app. Tony, you never cease to impress me!
it has wet/dry too, but don't use it unless your phone is waterproof.
ask me how I know.
This Old Tony LOL!😂😂
What could you have possibly been doing to prove that? Does oil distort it at all either?
try the belt sander app, but watch that hair trigger.. still looking for my phone after that mistake.
Hey Tony, why are your video so satisfying :) Love em
Hope he is well, maybe a Alex reach out could lift the spirits?
I watched this, and now I need to see DiRest-of it
Can you give a link? I couldn’t find it.
Did anyone find the video from diresta's channel or did I miss that one when I looked for it
Your videos are some of my very favourite on TH-cam!
Great projects, great explanations and awesomely solid dad humor! The kick from the airgun almost had me spewing my morning oatmeal out onto my laptop! You are an absolute hero!
Man.....I had such a crap day at work....Came home, hopped on TH-cam and found this. Life aint bad.
Hay, you are my twin ! 😀
Fun fact: If you have anything, and I mean ANYTHING that resembles "brass knuckles" in Pennsylvania and the police find it in your possession (and I don't mean you carrying them, they can just be in your vehicle) you will have to fight a felony charge of "manufacturing weapons". Even if they are a toy belt buckle. A person I know was pulled over and he had the belt buckle version laying on the floor of his truck because it broke off his belt. These things just looked like brass knuckles, they wouldn't even fit a child's hands. The police arrested him on the spot and it took him 5 years to fight it and get off probation after having it dropped to a misdemeanor "manufacturing weapons charge".
Oh yes!
share them both with a new video :D
HTR, your vids have been awesome of late. The paper cutter was superb. Is there a follow up with the tool you restored for Mr Diresta? He's not mentioned / shown it yet.
Thank you! I found a hairline crack in the cylinder that was allowing air to enter and causing the drill to not run properly. I need to either fix it or find a replacement at some point. I sent Jimmy the Cutawl I restored as a thank you.
Man, I am constantly impressed at your talent. Not just your crafting skills, but the unique sense of humor and comedic timing you are able to imbue in to your videos. They make for a perfect video.
Thanks Jose, glad you like them!
Yes. Yes. Yes. Yes. Yes. YES!
@ 15:10 had me 😂 on a packed commute. Excellent video, fantastic tool and just the right amount of humour.
Top draw man!!
Jesus... I absolutely just love this channel. Gotta be the best channel on the tube!!!
Holy crap. Mr Diresta and you working together using NYCNC plates? That's half my youtube faves!
Most excellent as always Tony!
ATB, Robin
Exactly why you're my favorite TH-camr...not sure if it's the aluminum cutting scissors, the cell phone sandpaper, the caliper zoom (combined with your impressive design/machining skills) - your videos are pure awesomeness. I learn something from each one. THANKS!
Metal, precision and comedy.... brilliant as always : )
WOW, the multitalent carpenter master and the machining video virtuoso do a collaboration, this video is a dream
Yeah man, the YT maker / machinist world is fuckin awesome. To the "professionals" they may seem like hacks but for the average guy like me, I look up to them. I wish I had the facilities to do a quarter of the stuff they can do, but I'm happy watching cause they are maing shit, not just talking about making shit. There's too many YT maker guys to mention, and it's effin awesome.
ey dude, i work in an industrial production shop and i can tell you half of the guys there coudn´t do what they do
Something something clickspring something
You are a genius. Your range of skills is unsurpassed.
Awesome! Now that you and Jimmy have collaborated, there is no telling what awesome inventions we'll see in the near future! Great job!
There's one thing that I'm sure of now, YOU are the guy that all of your friends want to hang with ! Got the skills and the humor AND the personality,........ just don't run for any kind of public office, that might mess you up in the head ! 😆
That sandpaper app would come in handy, but I think I liked it better with the texture, looks good anyway! 👍👍
Thanks for sharing and take care.
thanks Ken!
This is great, I fell asleep at the exact moment he started and woke up to a close up of it spinning around slowly.
Every episode I watch of TOT makes me realize that if he wasn’t bound to the confounds of his containment unit he would literally take over the world. He’s too powerful.
Your videos are always fun, but much more than that, they teach and educate. The combination of the two is what is needed in School Teachers these days. Cheers.
thanks Lamb!
I have really been loving your content! I binge watched all of your videos over the past few days. I have to say you are one of my favorite people on youtube for your humor, video editing skills, and wonderful use of machines. Hopefully I will be able to learn more from you in the future too!
I'm always shocked TOT doesn't have more followers. You really can't too his videos in content or quality.
Thanks IR!
StrainGauge: I concur. Is a travesty.
Tony you are on point. I love your style. I can't get enough of the sans paper app and the cutting stock. Hilarious!
The CAD workflow/tipsntricks/how to dress video would be super appreciated!
iwtommo yeah particularly the how to dress part, not sure that's covered in any other tutorials I've seen :D
The offset put me in mind of a split line in a sand casting. Nicely done. I'm sure Jimmy was liking it because that's the kind of guy he strikes me to be and I can see his comment....
Thanks for the video.
I don't laugh much, but when I do, it's on a This Old Tony video.
A This Old Tony and Diresta colab... awesome! I love it. Both of you are my favorite people on TH-cam, as well as my undeclared mentors. Keep up the amazing work. I love you both
Great work! Shouldn't there be a venting hole below the valve? Now any leakage through the lower o-ring can still build up pressure below the valve.
yes but if there is leakage in the lower o-ring what's to say the middle and upper o-rings don't leak as well? just trust the o-ring.
bump this for the final design
@@tylergarza6632 good policy in general, should be on a bumper sticker 😱
It's wonderful watching my Hero building something for our Lord & Savior. Tony, you mentioned not knowing what direction the channel is headed lately... It's upward. Your videos get better every time you produce one. Thank you for making us feel welcome into your temple.
Thanks Tony and Jimmy...looking forward to the cad and Jimmy's video(s). Interesting to bring the sketch in and trace off of it...have done it in AI and exported to acad. Would like to know more about how the port diameters and spool valve diameters were fingered, earballed or enginerded for specific flow and noise levels. Glad no one was hurt in the making of the knuckle blow gun proto and hope that sanding app doesn't get butt dialed...might be hard on the fingers and knuckles. Perhaps the final version could have a magazine of tips that ratchet into place and a slightly tapered spool valve for even more control. Always a pleasure to be able to watch class acts. ~PJ
Thanks PJ!
Just started watching your channel and now subscribed. You have a gift! You have the ability to give great instruction AND with a great sense of humor! I watch about 2 dozen machinist/build channels on TH-cam and I think you do the best graphics and clear camera work out there. Thanks for sharing!
What ever happened to the air gun did it go anywhere I can't find any videos on Jimmy's Channel wanted to see follow up
Pure genius and very skilled craftsmanship.
Thanks RSW!
You might've already considered this, but I'd drill a hole somewhere (maybe through the top of the shuttle) to vent that spring chamber. If the leak rate at the bottom oring is higher than the middle oring, pressure will eventually build up in the spring chamber and give you the effect you mentioned initially with the two oring design. It really doesn't make much of difference since you'll notice it right away and can just replace the seal, but coming from a paintball gun design background, that sealed spring chamber doesn't sit quite right with me.
good idea tyronejk, thanks!
Could you please share with us the link for the sandpaper app?
And how about a file management app, too.
Those apps are too "rough" to download/install.
@@troyna77 True and wear out the fiber lines and antennas of 4G, so service providers do hate the app.
Your editing made it look like you drilled and tapped for the inlet and nozzle, put in the valve, and air flowed through solid aluminum. I would have expected drilling those long air passages would be a challenge and wanted to see if you used any tricks to do it.
Both inlets meet in the passageway that the valve is in. easy peasy. Drill the inlet and outlet straight in, then drill the valve body straight down.
Robert Szasz I was wondering about that! Thanks
If you look closely, when he's about to drill out the nozzle mount you can see that he'd already drilled the air passage
It's Tony. He just smacked em with a center punch, that makes a perfect hole every time.
Alex Swavely Ah yes, got it at 7:30, not paying enough attention, I should go to the bottom of the class. Cheers. Joe.
Neat! I bet the x error in the CNC routering was due to a variation in the length of the stock, that'd be easy to slip by. Maybe your scissors need sharpening?
As usual, it's been a "blast" watching your video. Thanks for the laughs and the idea for a new blow off tool. Great stuff man. I do truly enjoy watching these.
Got me laughing like a drain, as always.
McAtheist "laughing like a drain?"
Can't wait for Diresta's part, been a fan of him for a long time and nice to see that he's collabing with one of my other favourites :D
The dream team has been formed!
I respectfully disagree, Sfefan Goteswinter is missing here. XD
Dang Tony, your delivery, sense of humor and overall content make your videos such a pleasure to watch. Thank you for taking your time to produce these videos.
When you called Jimmy a "kid" I almost lost it from laughing then realized y'all got it like that. It's awesome to see the comradery .
Should have left the "Farthead" on the final part.
Agreed!!!
It’s pronounced far-THEED
The production quality, both in terms of your machining projects and videos, is simply astonishing...
Thanks!
15:10 i was not expecting that
He made me choke on my water
The phone gag was epic.
Tony, could ya post a link for that phone app. Running to the store for just the right grit is getting old. Dude you are a hoot! loved it.
You were killing it with the gags in this one, Tony.. Keep up the good work.
Much nicer than mine (sorry harbor freight)
hazard fraught
Get AVE in on a threesome, b like the frickin Avengers.
But old and in their garage with a mill.
And beer.
@@red00eye they could probably put together some fancy gadgets that would make Stark blush 😳
Oh my. A TOT and Diresta matchup? Best of two worlds. Superlative!
did you get those clippers from Ichban Moto ?
Clippers? That is a diamond shear.
COLAB! with ichybum!
Mr Tony and Mr Diresta. Gotta love the stuff that happens on YT with all you smart maker guys.
Very cool vid, bro
I was a bit late to the ToT party but I was instantly addicted. To feed this addiction I started watching the older vids and just have to say the progression in production quality in your vids is amazing. All the while staying true to your original humor and style. Bravo!
The sandpaper app is sure legit, I use it all day.
But that file, come on TOT, that is fake as a 3 bucks bill
Should've stopped while I was ahead?
We all know the file app is exclusive for Samsung Edge
This is awesome, its so rare to find this kind of videos where the project progress from conceptual design to working prototype. I'll sure be watching the follow up video.
15:10 Laughed out loud
Great episode!! Love the phone abrasives. Shout out to Jimmy too
Jim
Tony,
Nice work as always. Man, you just always knock it out of the park. Hope those kids are enjoying that go kart.
Jimmy wanted it done right so he came to the right man. Great edit, hilarious of course, and a beautiful end product Tony. Thank you.
Beautiful! one of these in stainless would last for generations
I want one!! Thanks for the great videos. Your humor is spot on!
I didn't notice how happy I get seeing a new TOT video until now
Always enjoy your videos and the laughs you throw in. Still my favorite TH-cam channel. Thank you for sharing. G W
Another great video. Can't wait for Jimmy's.
15:10 scared the shit out of me. I absolutely love the humor you put in your videos.
Tony - Brilliant, informative, and funny, just as I have come to expect from you!
15:09 - Almost spit out my coffee. Thanks Old Tony!
Best colab ever!! love you both guys!
I keep coming back for more. Thanks for another inspiring video
One of your best videos Tony! Well done!
Loved the phone sanding part, litrerally rolling on the floor laughing, brilliant! Just brilliant.
Two of the best youtube channels making a collaboration. I say Yes ! very nice video, love 'em. Thank's for filmin'
got to your site from watching DiResta's site. This video is fantastic. Love the mix of humor, detail and experience. Well done.
Man this is fucking cool. The fit and finish of your projects and your video editing is pure gold!
lol.. i flinched a bit when you finished it up and did the "kick back" gag..
Love these vids :D
Yep, gonna need one of those. Thanks, Tony!
This was the first time I watched one of your vids, but not the last. I like your style.
"...its got quite a kick" Solid laughing fit for 10 mins. Well done Tony, earned my sub!
Friggin Jimmy, Friggin This Old Tony,.....Friggin Brilliant!!
Your builds never fails to satisfy. Keep up the good work!
That's cool as heck, who wouldn't want one of those!
That is absolutely beautiful handiwork.
I find I always have a smile on my face watching your videos, well done.
Thank you Tony that was both hilarious and amazing!
oh my!! i lost it when he tested it and shot back!!! great job!!!
Lovely, Good & Nice Piece. You Tack back nature at your home and Caressing our eyes, you do in very Special Way wich is never boring. You are a very Good Teacher & You understand Art . Thank you Mr. Tony :)
I really enjoy your videos. They are entertaining and informative. You also have a great sense of humor. Keep up the great work.
Tony and Jimmy. My day is complete!
Hi Tony,
For the 3rd o-ring to really work, there must be a relief hole for releasing any minuscule quantities of air that do cross it. Have a drip for long enough and you can fill a bucket. And when the bucket overflows, that shuttle-pin *will* fly across the room ;)
The leak could be to the outside (near the middle finger-hole) or to the output-hole (by means of a bore through the valve-shuttle). Cheers!
Best video I've watched this month. And I watch a lot of videos. Great job!