Correct, he’s German or some bs and doesn’t know English well enough apparently, but oh well, w/e. Or maybe it’s click bait bs, which wouldn’t surprise me.
I don’t think there’s enough of a difference. Air coolers are one thing but more brands than not use the same pump and their radiator designs aren’t much different either. I think the only real variable is the fans and even that has gotten out of hand with people picking 3000 rpm fans that run at 55db bc they run 2 degrees cooler than a 2000 rpm fan running at 30db. IMO the only thing that matters in choosing cooling options is noise to performance/acoustics and the rest is non performance related.
the 360s has the same "hydroshift" pump and cold plate, but weaker 27mm single wave fins rad and slower fans than the other hydroshift, yet the 360s is only .7 degrees behind the performance? Impressive. the 360TL has less pressure in the fans, but higher cfm, 31mm rad, 1mm thinner rad than the performance, and lacking the not-p28-fake-T30s 6.99 mmH2O fans. This will be a close result. Did you notice any difference with the measurements with the LCD displaying sensors, images, or turned off?
"tubeless" .. hm .. those clamps and setup looks familiar. Do they use the same OEM as Thermalright? Cause the Thermalright Frozen Edge 240 has all that, too? I've ordered one about a month ago for my Mesh-mATX build (that has been WIP for over 2 years, and albeit I'm nearly done moving on to the A4-H2O, I'd still like to finish it .. somehow). AFAIK the TR Frozen Edge has been around a bit longer, too. Maybe the OEM for Lian Li actually IS Thermalright? :D cu, w0lf.
Any experience in pump will helps…gravity and air bubble play a big part in the operation, not only causing unnecessary stress and efficiency of pumps…
I'm using an i5-14500 and the Intel stock cooler RH1 bundled with the i9-12900 because the VRM heatsink needs some airflow and I need a bit of RGB on the CPU fan to tell me if it's spinning, It was important to me to make sure the RGB effects weren't overkill.
Got and installed this AIO yesterday sad that at its price point it has pump noise . Does any manufacturer make a quiet AIO anymore ? I have tried 4 different brands .
looks wonderful. Curious to see it it could fit in my O11D mini with how tight the space already is up there, but this will probably cost a kidney when it arrives here in brazil so I won't find out so soon lol
It might lose some performance if you put the tube at the right of the pump as you show in the video. Just wonder how it will perform when the tube is at the top of the pump head. The R AND TL version both have thicker radiators but weaker pumps..only 3200rpm max while s has a 3800rpm pump. What is the performance diff...？
The "tidy tubing" idea won't work with quite a few motherboard/case combinations. It won't work with mine, as there's not enough room for the tubes to drop down due to the heatsink covering the chokes/mosfets. Reversing it would look stupid and wouldn't hide the tubes completely, which then ruins the idea behind the tidy tubing. Given that the performance isn't much better than the Galahad II, it'd be better to get a different AIO altogether.
@@tonyy.8852 Not true at all, I did say itx/matx. I have both itx & matx cases here that only take a 240mm or 280mm max, perhaps I should've said SFF instead..
your videos seem to be well organised and visually appealing but why dont you include literally the most important benchmark which is low noise/low fan rpm normalized performance? who uses their cpu cooling at 100% fan speed? sorry but it makes all of your reviews useless for basically 99% people
🙂DId i hear or read ❤LIAN LI❤ they sende you the weskest of the three 🙄😥 LIAN LI you should correct that by sending him the other two models and thereby making him benchmark all aviable models 😋
100s of videos i can find, and you're the ONLY ONE that installed the tubes on the side, as opposed to the top, and it looks SO MUCH BETTER.
2:28 Seeing such things makes me happy. There are companies that would omit such quality of life features.
That actually would look really good in my Y60 build, i might try and fit it in there (might be difficult due to the way the rad mounts).
Nothing looks good inside those wack a$$ cases bro gtfoh
"Tubeless," you keep using that word. I do not think it means what you think it means.
Liked for the Princess Bride quote
Correct, he’s German or some bs and doesn’t know English well enough apparently, but oh well, w/e. Or maybe it’s click bait bs, which wouldn’t surprise me.
i never heard of the icberg aio but dam it goes nuts in the charts :O
I actually got it for my friends PC he ordered from me and yeah the iceberg AIO is actually really good for like $90 off Amazon
I wonder how it would perform with Arctic P12 Max
That Silverstone IceMyst 420mm is killing it. DAMN!!
😂😂😂😂😂😂
Your little jokes throughout your videos are actually hilarious
hi men can this aio be installed at the front of the case?
what fans are those on the aio?
Wonder if this aio fits in the H6 Flow🤔
Do you think will fit in hyte y40?
I can tell you that on Friday
@@Andersg85 are you going to try?
@@smencosdepasol yep
@@smencosdepasol i can tell that it fits in a y40 but it’s a tight fit
Any chance you can review all of those AIOs using reference fans so that the test itself comes down to who has the best pump/radiator? 😍
I don’t think there’s enough of a difference. Air coolers are one thing but more brands than not use the same pump and their radiator designs aren’t much different either. I think the only real variable is the fans and even that has gotten out of hand with people picking 3000 rpm fans that run at 55db bc they run 2 degrees cooler than a 2000 rpm fan running at 30db.
IMO the only thing that matters in choosing cooling options is noise to performance/acoustics and the rest is non performance related.
You can do this with most AIOs, assuming you can side mount it and have a vertical GPU config. Just run the tubes down to the right behind the GPU.
the 360s has the same "hydroshift" pump and cold plate, but weaker 27mm single wave fins rad and slower fans than the other hydroshift, yet the 360s is only .7 degrees behind the performance?
Impressive.
the 360TL has less pressure in the fans, but higher cfm, 31mm rad, 1mm thinner rad than the performance, and lacking the not-p28-fake-T30s 6.99 mmH2O fans.
This will be a close result.
Did you notice any difference with the measurements with the LCD displaying sensors, images, or turned off?
"tubeless" .. hm .. those clamps and setup looks familiar. Do they use the same OEM as Thermalright? Cause the Thermalright Frozen Edge 240 has all that, too? I've ordered one about a month ago for my Mesh-mATX build (that has been WIP for over 2 years, and albeit I'm nearly done moving on to the A4-H2O, I'd still like to finish it .. somehow).
AFAIK the TR Frozen Edge has been around a bit longer, too. Maybe the OEM for Lian Li actually IS Thermalright? :D
cu, w0lf.
Thank you !
The sarcastic, tongue-in-cheek comments are the reason why I subbed to this channel 👌🏻
Lian Li if you are seeing this. please update L-connect 3 to have the 4 sensors like in this video for the GA II LCD. Thank you
I own a Kraken elite 360(2023) do you think it's worth upgrading to this?
So this will not fit an LGA 1200 right?
Any experience in pump will helps…gravity and air bubble play a big part in the operation, not only causing unnecessary stress and efficiency of pumps…
Does this rad support push/pull setups?
Pleeeease, test corsair icue link h170i 420mm!
I'm using an i5-14500 and the Intel stock cooler RH1 bundled with the i9-12900 because the VRM heatsink needs some airflow and I need a bit of RGB on the CPU fan to tell me if it's spinning, It was important to me to make sure the RGB effects weren't overkill.
I notice in all your AIO tests ther is a decided absence of Corsair. H1xxi Family. and i happen to have the H150i
Got and installed this AIO yesterday sad that at its price point it has pump noise .
Does any manufacturer make a quiet AIO anymore ?
I have tried 4 different brands .
How much?
I am choosing between this and the EK CR360. I saw that the CR360 has better performance, but I like the LCD on this one.
Is it compatible with 1200 socket?
looks wonderful. Curious to see it it could fit in my O11D mini with how tight the space already is up there, but this will probably cost a kidney when it arrives here in brazil so I won't find out so soon lol
The P28 have a certain sound at arround that fan speed, would not be suprised if this fans suffer from the same issue
It might lose some performance if you put the tube at the right of the pump as you show in the video. Just wonder how it will perform when the tube is at the top of the pump head. The R AND TL version both have thicker radiators but weaker pumps..only 3200rpm max while s has a 3800rpm pump. What is the performance diff...？
how much does it costs in Germany ?
Another great video ! You have found a perfect format for your content. Absolutely interesting and easy to watch 🤗
12:10 Emotional damage start 😢
Where’s the Deepcool CH160 and assassin 4S review 😂
Deepcool is now banned in America.
I was so embarrassed by my tubes showing, I had to buy one.
Where is the "less" in tubeless? xD
Do u guys think I could change the fans ?
you can
The "tidy tubing" idea won't work with quite a few motherboard/case combinations. It won't work with mine, as there's not enough room for the tubes to drop down due to the heatsink covering the chokes/mosfets. Reversing it would look stupid and wouldn't hide the tubes completely, which then ruins the idea behind the tidy tubing. Given that the performance isn't much better than the Galahad II, it'd be better to get a different AIO altogether.
Why and why I have i7 13700k with ek Nucleus 360mm aio my CPU temperature is 86c with 220w dtp ???
5:04 how do such fuckups go through all design changes etc and not get caught along the way? xD Completely harmless in this case fortunately.
Just need them to make ram cards
eh iceberg thermal icefloe oasis 360 wipes the floor with this especially in noise to perf charts at half the price!
"Tubeless" - Bro, I'm looking at the two giant tubes coming off of it. What exactly about this is "tubeless"?
🙌
5:01 'CPU, erm, "CUP" ' That's one unlucky typo on Lian Li's part 😂
Ah yes, my Ryzen CUP, it's where the PC's computing power flows from.
Throw Arctic P14 Max fans on a LFIII 420
Nice but Lian-Li, we want 240mm and 280mm versions, would be perfect for itx/mATX builds..what gives?
Most matx case can fit 360 now tho, like Lian Li A3, Asus AP201
@@tonyy.8852 Not true at all, I did say itx/matx. I have both itx & matx cases here that only take a 240mm or 280mm max, perhaps I should've said SFF instead..
idk dude they comming out with everything bruh
CUP :)
your videos seem to be well organised and visually appealing but why dont you include literally the most important benchmark which is low noise/low fan rpm normalized performance? who uses their cpu cooling at 100% fan speed? sorry but it makes all of your reviews useless for basically 99% people
At some point sockets need to die.
Watch AM6 use the same mounting 😂
🙂DId i hear or read ❤LIAN LI❤ they sende you the weskest of the three 🙄😥 LIAN LI you should correct that by sending him the other two models and thereby making him benchmark all aviable models 😋