How to build eolian turbine with oil barrel step by step inexpensive VAWT savonius ?!
ฝัง
- เผยแพร่เมื่อ 10 ม.ค. 2020
- This is step by step tutorial so sit back and Enjoy.
Today we are gonna build a Savonius eolian turbine,
it's a type of a vertical-axis wind turbine, used for converting the force of the wind into torque on a rotating shaft.
It is one of the simplest turbines we can build using items that can be easily found.
Now will make a quick run down of the things we need for this build.
1. A barrel as blades
2. Shaft with bearings - as you can see we already cut it in half and make it longer
3. Car wheel as the pulley
4. Hollow rectangular bar for the frame
5. Various nuts bolts and plates to put all the things togheter
6. Optional you will need a car hub
the main advantage is that we can use it to lock the turbine in case of storms.
Ok, the list is done, let's make it happen. - แนวปฏิบัติและการใช้ชีวิต
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 2](http://i.ytimg.com/vi/YpQnHoQvZt4/mqdefault.jpg)
How admirable. You all have done a great fabrication with a little of nothing. All of you are way cool and should be proud!
This was 1st developed in the mid 1970"s by engineers and scientists at "Center for Alternative Technology" " CAT" in Mid Wales. It was designed using a swashplate pump to lift water from wells in poor arid regions of the world. They did an Apollo 13 type job . They were given a list of things found in the region as scrap and a list of tools and skills found locally. CAT still exists now an accredited school teaching sustainable living.
The one developed at CAT worked perfectly and in low wind conditions too.
Thanks for the info. Is there a video clip somewhere?
May 1975 some teachers and students in Tvind started to build a 54 meters tall "real" windmill - that still is making electricity - today 900 kW.
I went there about 1980. I learnt so much from them. Been back a few years ago.
@@CONEHEADDK no wind turbine makes so much watts. Bullshit
@@toihin5500 Go dig a hole, and jump into it... Or google my claim, before you embarras your selv even more..
Congratulations, Friend!!! Great project. 99.9% Approved.
I felt the missing of a leaver of a hand break of a car, to be 100%
Contrulation. From Brazil.
Szacun dla konstruktorów najprostszych rozwiazan
. Economico.. Pratico.. Semplice e geniale.. Bravissimo!!
Genau solche Kreativität braucht unsere Menschlichkeit !!!
Excellent ideas. I loved off grid power supply. Thank you for sharing your TH-cam channel. I subscribed your TH-cam channel to support your videos especially off grid power supply. Greetings from Canada 🇨🇦
You’re welcome 🙏
Ребята , я думаю вы уже поняли что его надо было делать двухрядным /двухэтажным / )) Савониусы удобны но маломощны ... , а так все класс ! 👍 Просто и надёжно 🔥
Bă, voi sunteţi români de-ai mei după cum ati lucrat şi după cum vorbeaţi între voi în timpul lucrării !
Felicitări !
A iesit o treabă bună !
Acest canal a preluat videoclipul de pe un canal romanesc.
@@apologetica911 Do you know the original channel? Maybe they have part 2 and other great videos.
I like your idea of the brake but I think that a governor to apply it when the wind gets too high is needed. A ball governor which would pull on the cable after a certain wind speed would do it.
👍Спасибо!💰Полезно!👌
Like your job .
Very smart designs
Good Job Friend.. and an interesting video The amount of work you put in deserves reward.. Hope TH-cam paid you plenty.. Thanks for the entertainment and education
Excelente proyecto,muy bueno el video. Muchas felicitaciones.
great ... good work special greetings holger
⁴⁴
Made in Romania!
Big like!
BUEN TRABAJO!!
TE RECOMIENDO QUE LE BAJES AMPERAJE A TUS SOLDADURAS
Helps to grind off the rust, when you are welding, so you get a clean & better weld
Yes, the welding was a disaster.
@@demus8757 фффф²х
@@user-yw7lc3fg3u You don't agree? Well have another look at the video then. This time with your eyes open, maybe you then see what I mean.
If I were you I would add at least three more generators to that turbine. You have the surface area on the tire to accommodate three more. One on the already existing swing arm,and two more on a swing arm opposite the original arm. Then add three more controllers and lead wires into the controls. Break down your power bank into four separately charged units with the outputs of all feeding the inverter or add three more invertors. Just a thought. You might also want to add some Rust-Oleum paint to help reduce the rust.
Simple but effective design sir
Use a car or lorry alternator with neodymium magnets for higher efficiency and bring axle all the way to ground level and use gear wheels to increase the mechanical advantage and also the weight of the whole turbine should be concentrated at the bottom , above all check the force of the wind with a smaller model before launching on the real project .
I sell steel 55 gallon barrels in Jacksonville Florida, I'm willing to give one barrel away to each person who undergos this project in Jacksonville Florida and does a video of the build
qqq
Not in Florida but I hope you get some takers of this project.
Nice give away brother the issue with this project you need to check the wind map before trying to build this windmill if you have a wind speed 10 meter/second average all year also you need to check this speed in your house after you need to get a low rpm low torque generator to get benefits from low speed wind .you need also a special charger that keep the voltage stable to desired charging voltage is like MPPT charger .and voila you cut your electric bill
I have a design for using multiple VAWTs driving a common shaft I will be building soon.
I think that you built it backwards.. I have seen these working but right to left clock Wis backwards
God bless you and your family as well very amazing video guaooo and oforeble
You mean "good and affordable"?
The most impresive thing was seeing this guy cutting the drum without the grinder guard.
Like many old professionals here in romania, and without glasses.
@@kcsandelectronistzsolt7084 respecfuly , too bad that at times things got to be done that way but from the bottom of my heart I would like to congratulate you guys for your perseverance, congratulations to each and everyone that one way or another made it possible, from Puerto Rico to you guys outhere.......Jesus Torres, blessings to all of you and love ones, may our Creator be with all of you.
And I'm wondering why he didn't just drill a nice round hole with a hole saw before he cut the barrel in half. And I guess they haven't heard of Sawzalls yet. They are all the rage for cutting metal with.
wow nice good power ;) 1W nice ;)
thought it mad 5 watts...........
@@rearspeaker6364 5 watts nice :D how much did you spend? = 0 $ its ok freee 5 W good /
for science !
for knowledge!
1. I suggest you take welding lessons.
2. Very clever invention. Thx for sharing.
Bravo băieți. Buna treaba
Muito bom gostei.
Welldone 👍
por falta de companheiro, não fiz. Mas, acho GENIAL essa idéia Parabens BR
Weryi Gut Yuoi deed a cut giob suoper nicei
The wings aren't enough. Good work.
Skills R Gold Thank You New Sub
very good idea , i like it, great for saving a few quid, yes?
nice idea more things please.
Interesting video guys. Constructive tip: when stick welding with a long rod then hold the rod with the other gloved hand ✍️ and it will make striking an arc much easier and accurate. 👍
Great job
"THE WHOLE TURBIE WIND PROJECT BECAME SO HEAVY THATS WHY THE WIND TURBINE IS NOT ROTATING..BUT YOU DONE THE VERY HARD AND GREAT JOB"
there was also NO WIND on the day they were filming!
Just a few things needed to make a better unit.
First, get a real chipping hammer.
Then, add more diagonal braces, from the left to right side. Paint it before it starts to rust.
And keep your welding rods away from moisture. Put them in any plastic bag, and keep it sealed. Definitely, don't leave them a few inches above rain soaked ground. Moisture in the rods causes steam, and then you've got air pockets in your welds, and built in weak joints.
If you were welding on a paid job, and a professional welder saw that, he'd fire you, then tear apart all your welds to redo them. You pull out one rod at a time, and use it immediately. The more time it's exposed, unheated, the more moisture it collects.
Yes get a rod heating oven plug it in to your generator make Shure the are hot before using and a stronger generator more than 8kva and bend your rod to the right angel before striking an arc AND watch movie "welding for beginners"
Good, I 'm waitting the next Vidio.
Amazing
Good job
Nice video!
📸
Super creative!
Thanks share!
🛠💨💪☸️⚡️
👍Like!👍
Hey guys. Great video. Thanks for sharing. Is there any reason why you don't use a plastic rain barrel?
Probably that is what they had
Need it higher up but gr8 💡
Great ingenuity
Brakes are good!!!
Gracias por compartir sus conocimiento, como se llama el generador y donde lo consigo en colombia
Excellent
I really like it, just let it be a hurricane wind and I see the generator as small.
Look, sir, vultures, we'll never get home again!
What?
Look up Centrifugal governor, a version could be made that will make the break work even when you are not around.
I am thinking of making a similar version as you did, however I want the centrifugal governor to close up the barrel for me, making it slow down as less air is able to turn it. I am still working out how to turn each half of the barrel inwards to close it off from the air.
Feel free to take my ideas if you can use them. I am sure, as I am in a town, someone saying it is an eyesore.
Good luck. Lee
You guy's done an excellent job putting everything together with that turbine . My only problem is that I don't know what's the use of making it And what it does . Why'd you guy's put it together for in the first place .Thank you for sharing and making this video .
Buy
Generating electricity?
Fantástico video un abrazo desde España Málaga el gurú de la serigrafia
Bravo baietii :)
This might be great if it was built in an area with extremely high winds. I seriously doubt thst it will work in anything less than gale force winds. I will look for updates but I doubt it worked in low wind conditions.
I believe it could be made more efficient by having the central axis such that half of each barrel overlap, perhaps a bit less than half. This would reduce mass displacement (like a ballerina) but also allow the air flow to drive counter-rotation, as the air traveling in the direction of the facing blade would generate additional force as it comes around and is directed against the opposing fin before flowing out. The transmission/spring system may also be a problem. if you can commute the rotation with minimal resistance and slippage, this would greatly aid in low-wind conditions. A flywheel system may also be an interesting addition, conserve some rotation (but costly..). Another idea is having no commutation at all and have the power generator sit the end of the shaft. Eager to try this myself! There are presently, far-more compact commercial/fundable projects/solutions. They sit closer to the ground, some are apparently more bird safe in design. Can't recall how their output was though, or if they mentioned most ideal candidate locations for average wind speed as a parameter unfortunately.
canggih - keren - fre energy
Results on next video...
No electricy, no video...
It seems this is not made my this channel, said so in other comments. Makes sense, only one video.
很不错的创意
Trebuie să-l urcați un pic mai sus,5,6 metri ar fi ideal.Da pt început e bine.👍
Good day, I think you may a governor at the end of bar holding the brake to regulate the speed in strong windy air, thanks for sharsharing the clever idea to build economical and environment friendly energy generator!!!
what are you going to fabricate that governor with? good suggestion but you need to consider the "tech level" of the location and people making the device. Everything is built from SCRAP! they did a good enough job, but there is ALWAYS room for improvement I fabricated one back in the mid 1970's as a proof-of-concept-project and it worked well enough
Muito obrigado
Awesome sir
Felicitari pentru ingeniozitatea constructie ! Cum stai cu productia ?
Nice and easy
❤️ From pakistan 🇵🇰
Buen trabajo amigo gracias por el Consejo ✌🤔🤔🤔🤔
Всегда жди ветра с моря. Carlik,
This was a great video but i'm sure many including myself would like to see some positive results and testing. This video was also done two years ago. Can you do an update? You have 6K subscribers who are undoubtedly awaiting your next video, as am I. Thanks!
Same
What kind of generator did you use, i didn't understand what you said
Please modify turbine blade,it gives more advantage for rotating.thanks,nice knowledgeable video.
how did the generator run that welder without destroying it?
Tank.you.mr.for,t,ex.perience 🌹
Wow nice.
Весь пар в гудок.если бы работало тогда лайк.
I do really like it , but where is the next video that shows the current produced in this turbine ?
You are right!. It does look simple. ALTHOUGH to those that don't have access to those materials it would be next to impossible.
How far are you from a junkyard??
What wind will push barrel if barrel let's wind get away? They are to close.
Chiếc bánh xe quá nặng , gió không kéo nỗi , nên thay bằng nhông xích truyền động , tua bin sẽ chạy tốt.
Nice
I am not sure if it works properly as the barrels are too heavy
Yes, too heavy, but free. Plastic drums would be best.
Wind energy!
Thanks
nice :)
GOOD ONE
Only This video in the channel ... Would like to see it running 2 years later.
It seems this is not made my this channel, said so in other comments. Makes sense, only one video.
Ok thank
See also the clip "Cum sa construiesti o turbina eoliana din butoaie de tabla", for Romanian speakers
Remove the tyre in order to reduce and increase power generation
Tenis que calentar el electrodo antes de empezar apontear amigo
And what kind of welder are you using, appears to be a nice little welder
what are you doing
A lot of work I watched another video where they made five fan blades with the one drum really good design not as much weight and drag we have here I watched the whole video enjoyed their idea but prefer the other one
A se vedea si clipul ”Cum sa construiesti o turbina eoliana din butoaie de tabla?!”, pentru vorbitorii de română.
what is the commercial name of the electric generator that you put in white.
This is a heavy, high friction design.
Even if it could be built by paper it would generate too much drag to be of any practical use.
See also the clip "How to build a wind turbine from tin barrels ?!", for Romanian speakers.
Time: 11:47 am auzit cuvinte in limba română!!!😉😉😉
The main questions is - does it worth? What is the power output?
🤦♂️
Good cutting and welding skills but final result is horriBULL
Wow 👍
What was in the barrel previously?......most dangerous procedure using an angle grinder to cut a barrel in half.