At 13:20 the spacers that go under the barrel and plungers are on the table and you do not show putting them in before installing at !4:05 the barrel and plungers! There is a dial in procedure to set a degree that the height for injection timing that determines what thickness of spacer needs to be put in! May have got it all together, but missed a lot of thing that is needed to be checked, throttle shaft seals, guides, etc!
Bhai ap isky plunger governor fit krny se phly dalo aur ragh lock krny ka bolt bnwao ya jo apka tariqa ha ya bhi theek ha per proper tariqa phly plunger daly jaty ha esy koi bhi plunger galat beth skta ha aur shaiyet ap machine pe nhi dkhty hogy pump qk ap hath se sub set kr rhhy ho
At 13:20 the spacers that go under the barrel and plungers are on the table and you do not show putting them in before installing at !4:05 the barrel and plungers! There is a dial in procedure to set a degree that the height for injection timing that determines what thickness of spacer needs to be put in! May have got it all together, but missed a lot of thing that is needed to be checked, throttle shaft seals, guides, etc!
ok next time thnx
I knew something was fishy when I saw the paint still on the surface the depth micrometer measurements are made from . She might be a smoker!
Good job👍👍❤
Masya Allah tabarakallah
Bhai ap isky plunger governor fit krny se phly dalo aur ragh lock krny ka bolt bnwao ya jo apka tariqa ha ya bhi theek ha per proper tariqa phly plunger daly jaty ha esy koi bhi plunger galat beth skta ha aur shaiyet ap machine pe nhi dkhty hogy pump qk ap hath se sub set kr rhhy ho
nice 👍;;;;
Good🎉
Many mistakes. 😮
Could you please tell me so i can take care of my mistakes