Bro my primary router is of 2.4ghz and my secondary is of 5ghz so will get 5ghz band option if i connect sec as access point....are u getting 5ghz band option...?
Parental control kaam karega Esme? Mere pass ADSL TP link TD8961 modam router hai. Agar 1200 wale ko connect karne par kya vo kaam karega, parental control kya new wale me kaam karega
Hi does TP-Link Archer AC1200 Archer C6 has the bandwidth control feature? If not then which router I should purchase? BHARAT FIBER is the provider and Optilink is the single band router.
@@ConsumerZilla Hi thanks for the response. I've multiple devices, that access single band router with 100Mbps speed. I want to set the limit, let's say device 1 should only be able to get 4 Mpbs, device 2 should get 10 Mbps and so on.. so for that I need bandwidth control option.
Hello Bhai duel band router have only one input port from which both bands enters into router and band lndicater led light up speed is automatically settled.
It has one feature called as "Setting Priority" for the connected devices from where you can set up the maximum bandwidth for those devices. I usually do for the devices that requires important connections among the devices connected.
Brother, can I use AX1500 Wi-Fi 6 Router as like Extender? I have a plan to buy an Extender but if a Router does the same job should I go for the Router instead of an Extender?
If you'd rather not replace your current Wi-Fi router, then an extender is the best device to get to eliminate dead zones. Wi-Fi extenders are also more affordable than mesh routers. Therefore, using them to improve your wireless network costs less.
Hi dear, sorry but i am very much occupied at this moment and i had to technically chk this to tell you, which is not possible for me at the moment, sorry 😞.
I have same TP-LINK archer c6, so how can i see Data Usage Statistics in this Router like to know that which device has consumed how much data while connected to this router, So how can i access this feature in admin page?
Sab kiya maine. Last me 2nd router and laptop ka ethernet hatake, 1st router ke lan port and 2nd router k wan port me connect kiya phir SSID me connect kar rha hu to no internet show kr rha h
Hello bhaiyya. Really nice explanation 👌 So it's been a long time since you uploaded this video. 🙂 Please update us. Have you changed any settings? Or it is still the same as *explained in this video* Have you noticed any wifi disconnections, IP conflict, bad performance from the router? Waiting for your reply
Hey bro, thanks, i hv been using the same setting as mentioned in the video and no issues till today, also i use router 24x7 on but no issue with the device till today... Thanks for your comment.. also do subscribe to ConsumerZilla ☺️
How can I connect enable internet on the access point without having to connect a wired line from the main router to the access point? I want to use the wireless alternative instead.( Access Point: TPlink Archer C1200).
Hello bro.. That method will be like wifi extender.. So to use the TP link router as access point you need to hv a uplink cable from ur ISP to be plugged in the WAN port.. Please subscribe to my channel id you like my efforts and support me.. thanks 😊
All tp link 'n' type 2.4ghz routers have a 'mode' button at top right corner on the tp link set up page. And we can set the AP mode directly without first doing the basic set up. Why is it not possible here. Secondly you must mention that this router has no range extender mode. Glaring miss.
Blue wala uplink port hai.. in which u need to plug the lan cable u get from you ISP.. yellow wala local lan ports hai to connect ur devices with lan lik computer TV or Laptop. Please hit the subscribe button to support me bro😀
If the video is in Hindi, why put the description in English? I clicked on this hoping to learn how to the configure my router but I can't follow this.
Hi Mahesh, but as the hathway internet is a cable internet had it has a cable wire which cannot be terminated in the tplink router directly, so i had to use the hathway modem/router to terminate the wire. 😃
@@ConsumerZilla do you mean to say your internet wire is ADSL/DSL WIRE?? BUT the tp link could have been in router mode and still do the same job as access point mode.... Just a doubt!
no bro.. old router me kuch setting karne ki jarurat nai hai.. jus mene jaise video me dikhaya hai wohi follow karo.. channel ko support karne ko subscribe jarror karna 😊😊
I’m so sick of this shit with titles in English and videos being other languages what’s the point nothing against the language but man TH-cam is really fucking up and it is infuriating.
In last you should have connected to lan port ! You should have done LAN to LAN connection but did LAN to WAN which will hamper your speed in long run as ip conflicts will happen . Also in access point you should have changed the lan IP address and disable DHCP
Hi bro.. Sorry, but i dint understood your point. I hv kept dhcp on because all my devices.. 3 mobile, 2 laptops, 1 desktop and 1 smart TV are connected to the TP link via dhcp..
Hi Chirag, let me explain, for old routers, when you manually configure to Access point mode. you have to disable the DHCP server and also connect lan to Lan. But in modern Routers that has Access point mode as a feature. You do not need to disable dhcp server, it is already disabled by default, so no IP conflict, and also you can connect from Lan to Wan without any worry. I have converted my Tenda AC10 router as Access point (inbuilt feature, no need to manually configure) and connected lan of TP link router to the wan of AC10. And it works flawlessly. Still confused watch this video: th-cam.com/video/Cg_gGECGLiY/w-d-xo.html
Bro my primary router is of 2.4ghz and my secondary is of 5ghz so will get 5ghz band option if i connect sec as access point....are u getting 5ghz band option...?
Hi, yes u will get the option to keep 2.Ghz and 5 Ghz both in ur 2nd router
@@ConsumerZilla thanks soo muchh✌️🫂
Ye LAN port primary router se secondary router ka WAN port ma connect hua ha dymamic ye static ip se.....?
Dynamic
Sir Modem ke LAN port se router ke WAN port ko kyu connect kiya?? Modem ko bhi WAN se nhu krna tha connect?
Parental control kaam karega Esme? Mere pass ADSL TP link TD8961 modam router hai. Agar 1200 wale ko connect karne par kya vo kaam karega, parental control kya new wale me kaam karega
Yes parental control will work.
Hi does TP-Link Archer AC1200 Archer C6 has the bandwidth control feature? If not then which router I should purchase? BHARAT FIBER is the provider and Optilink is the single band router.
Can you please explain the bandwidth control.. what exactly you are looking for.
@@ConsumerZilla Hi thanks for the response. I've multiple devices, that access single band router with 100Mbps speed. I want to set the limit, let's say device 1 should only be able to get 4 Mpbs, device 2 should get 10 Mbps and so on.. so for that I need bandwidth control option.
Hello Bhai duel band router have only one input port from which both bands enters into router and band lndicater led light up speed is automatically settled.
Hi BRo, i didnt understood your question
It has one feature called as "Setting Priority" for the connected devices from where you can set up the maximum bandwidth for those devices.
I usually do for the devices that requires important connections among the devices connected.
or sir dusri bat ye k dubara us router ko open kane k liya 109.168.0.1 pe khulega ya koi or ip hoga
+@digitalElectricaltechnolog7700 it must be same
Brother, can I use AX1500 Wi-Fi 6 Router as like Extender? I have a plan to buy an Extender but if a Router does the same job should I go for the Router instead of an Extender?
If you'd rather not replace your current Wi-Fi router, then an extender is the best device to get to eliminate dead zones. Wi-Fi extenders are also more affordable than mesh routers. Therefore, using them to improve your wireless network costs less.
@@ConsumerZilla thanks for your reply.
I want to extend my wired network so which operation mode should I choose?
U need to select normal mode.. dont use router mode..
Thank you so much 😊🙏
Ur welcome 😁
kya ise wireless extender jaisa use kar sakte hai?
Yes u can
@@ConsumerZilla can you pls guide
Hi dear, sorry but i am very much occupied at this moment and i had to technically chk this to tell you, which is not possible for me at the moment, sorry 😞.
@@ConsumerZilla don't bother figured it out already.
Grt job👍👍
My Primary router Connection type: PPPoE, if i used another router for using access point which connection type should i use ? PPPoE or Dynamic IP ?
Dynamic
nice dear sir
Thanks you.
Do subscribe to ConsumerZilla for more information video
Nice video... Wan wala blue port may agar na fit kare and lan wale port may lan wire fit kare then chalega right..
Hi bro .
No.. it will need wan cable to be connected in the Blue WAN Port only..
Plz hit the subscribe button if u like my efforts 😃
Pl tell me by is this wireless… like do I need to do any wiring
Can you please explain your questions properly..
Jo west Bengal durgapur me rahega wo west bengal choose karega time zone me
As its our india time zone.
Isko mesh wifi kaise banya baar ssid change karna hota h please reply
Hi bro, i hv not understood ur question
I have same TP-LINK archer c6, so how can i see Data Usage Statistics in this Router like to know that which device has consumed how much data while connected to this router, So how can i access this feature in admin page?
Sab kiya maine. Last me 2nd router and laptop ka ethernet hatake, 1st router ke lan port and 2nd router k wan port me connect kiya phir SSID me connect kar rha hu to no internet show kr rha h
Oh, you need to follow the video, because if i have configured it then it should be working for you as well.
@@ConsumerZilla I followed but it did not work. I used to do it previously tab karta tha. Now I did wds bridging. It's working with that.
Oh ok
Bro apke video mein TP link router pe WAN ka light orange tha, internet connectivity kaise ayegi, it should turn green right?
Yes green
Can you do the same without using cable. Kinda wireless, pls !
Hello, i think that will not be possible as i am using it as a access point and not as extensor
Sir mere pass bsnl ftth he. Use syrotech gpon-1000R-dont modem. Process are same?
Need to chk this bro..
Yes the same process
But connect lan to lan
Not lan to wan
I am facing red light issue..when connected to wifi ..it say connected without internet..any help?
There is possibility of the dns not set properly so the internet is not working
Hello bhaiyya. Really nice explanation 👌
So it's been a long time since you uploaded this video. 🙂
Please update us. Have you changed any settings? Or it is still the same as *explained in this video*
Have you noticed any wifi disconnections, IP conflict, bad performance from the router?
Waiting for your reply
Hey bro, thanks, i hv been using the same setting as mentioned in the video and no issues till today, also i use router 24x7 on but no issue with the device till today...
Thanks for your comment.. also do subscribe to ConsumerZilla ☺️
kal mujeh yehi set karna he
Apne time zone chennai kyu choose kiya kyuki apo chhenai me rahete ho isliye
Y red light is on but internet is running on access point routers
Where is thr red light you are talking abt please
Site is not opening
if you are connected to the wifi network the wifi portal should open
@@ConsumerZilla I am connected to the tplink wifi but still not working
What is the error
sir lekin access point karne k bad dubara khulta nahi he tp-link ka page. asakyu hota he ?
Hi dear,
You can chk the video and reference step by step as mentioned in the video.
It will work if you configure as per the video
@ConsumerZilla thansk sir
wirelessly kaise repeater banaye?? plz share that method too. without use of wan port
Hi Rohit, i will try my best if i can share the method..
Yes without wire how can we do that
Pls can you same acces point seup C6 router
Yes that should be ok to use on C6 as well...🙂
After setting up TPLink , I am not able to connect back to TP-Link admin page to confirm.
It should get a dhcp ip and ur desktop or laptop should get same range ip to connect and get the console access.. please check the connectivity
How can I connect enable internet on the access point without having to connect a wired line from the main router to the access point? I want to use the wireless alternative instead.( Access Point: TPlink Archer C1200).
Ohh. Ok i wil chk and let you know..
Use range extender mode
Thanks
Can we use this method wirelessly instead of putting cable to the wan port of this router.
Hello bro..
That method will be like wifi extender..
So to use the TP link router as access point you need to hv a uplink cable from ur ISP to be plugged in the WAN port..
Please subscribe to my channel id you like my efforts and support me.. thanks 😊
All tp link 'n' type 2.4ghz routers have a 'mode' button at top right corner on the tp link set up page. And we can set the AP mode directly without first doing the basic set up. Why is it not possible here. Secondly you must mention that this router has no range extender mode. Glaring miss.
Thanks for highlighting this, surely this may help other consumers 👍
Vai nila wale pe kya dena hain
Van port pe kya dalna hoga
Blue wala uplink port hai.. in which u need to plug the lan cable u get from you ISP.. yellow wala local lan ports hai to connect ur devices with lan lik computer TV or Laptop.
Please hit the subscribe button to support me bro😀
hi bro nice video but you connect LAN PORT OR WAN PORT TO ACCESS POINT
Thanks bro..
I hv connected the wan cable coming from my hathway router
Do subscribe to my channel to support me☺️
If the video is in Hindi, why put the description in English? I clicked on this hoping to learn how to the configure my router but I can't follow this.
How to set limite others divides please help me Tp link Archer C6 AC 1200
hi anshu, i dint undstood your question.
Jab me access point select karta hu wifi to band ho ja raha hain to phir save kaise hoga
Can u explain ur question properly.
@@ConsumerZilla access point Kiya lekin signal green se red ho Raha Hain phir net bhi Kam Nehi kar raha
Thn its some issue with ur configuration
U could have removed hathway router completely and directly connect the internet cable to the wan port on tp link router
Hi Mahesh, but as the hathway internet is a cable internet had it has a cable wire which cannot be terminated in the tplink router directly, so i had to use the hathway modem/router to terminate the wire.
😃
@@ConsumerZilla do you mean to say your internet wire is ADSL/DSL WIRE??
BUT the tp link could have been in router mode and still do the same job as access point mode.... Just a doubt!
Yes
Exactly
But in this way, unable to use vpn, qos, perental controls etc..
I dint face any such issues
Are you able to find the vpn menu option in accesspoint mode?
Hi bro, you are correct thats not available in Access point mode!!
Right
Wireless krna h
Old router me kuch nahi karna settings ?
no bro.. old router me kuch setting karne ki jarurat nai hai.. jus mene jaise video me dikhaya hai wohi follow karo..
channel ko support karne ko subscribe jarror karna 😊😊
I’m so sick of this shit with titles in English and videos being other languages what’s the point nothing against the language but man TH-cam is really fucking up and it is infuriating.
🥺
can this be done wirelessly ?
Yes , you can setup the router wireless
@@ConsumerZilla can you please let me know how can we setup it as extender wirelessly. I have archer a6
hey Bro, i am sorry for the late revert, but i am not much sure about it, as i have not setup it fr my self. :(
@@ConsumerZilla yes, this is possible
In last you should have connected to lan port !
You should have done LAN to LAN connection but did LAN to WAN which will hamper your speed in long run as ip conflicts will happen . Also in access point you should have changed the lan IP address and disable DHCP
Hi bro..
Sorry, but i dint understood your point.
I hv kept dhcp on because all my devices.. 3 mobile, 2 laptops, 1 desktop and 1 smart TV are connected to the TP link via dhcp..
@@ConsumerZilla your Hathaway modem will take care of IP allocation right.... 🤔
In your case both TP-Link and Hathaway are assigning IP addresses
Why does using WAN lead to IP clash if DHCP is off?
Hi Chirag, let me explain, for old routers, when you manually configure to Access point mode. you have to disable the DHCP server and also connect lan to Lan. But in modern Routers that has Access point mode as a feature. You do not need to disable dhcp server, it is already disabled by default, so no IP conflict, and also you can connect from Lan to Wan without any worry.
I have converted my Tenda AC10 router as Access point (inbuilt feature, no need to manually configure) and connected lan of TP link router to the wan of AC10. And it works flawlessly.
Still confused watch this video: th-cam.com/video/Cg_gGECGLiY/w-d-xo.html
mera ek quetion hai sir
Yes please..