im having the same issue except the vga behind the tv appears damaged, can i use that same converter and plug the vga end to the dvr and the hdmi to the tv?
Here's one for you. I have a analogue dvr there are no audio inputs on it at all, I have purchased a microphone and connected it to a camera, i'M USING THE HDMI PORT TO STREAM TO THE TV, if I used a VGA converter would I be able to get audio from the microphone recorded on the dvr?
Turns out, as suggested by @Bob Bakley, it was the settings for my unit. I hooked it up to my TV using HDMI and the resolution was too high for my small monitor to handle through VGA. Dropped the resolution in settings, plugged in the VGA to my monitor and it came up. Thanks for your advice Bob
Check the display settings in the menu. The VGA output has different resolutions than are available with the HDMI. I can't remember exactly what the exact settings are. In these less expensive units they can't output different settings for each dsiplay type.
its 1080 and it went dead. The output fo the HDMI is still 1080 and the monitor works fine. Fault was the vga, thanks for your comment. I should have stated that in the video.
No problem, I set one of these up for a neighbor of mine and he wanted to use both a dedicated monitor using the VGA output and run HDMI to his TV set. There wasn't a setting that allowed both outputs to function at the same time, it was one or the other.
Great advice @Bob Bakley, it was the settings. I hooked up on my TV and the resolution was too high for My monitor to handle. Dropped the resolution in settings, plugged in the VGA to my monitor and it came up. Thanks for your advice!
IAM using VGA to HDMI converter in my laptop Hp pavilion dv 6000 to connect with my projector it works properly in duplicate mode it shows both display proper in laptop as well as in projector but when I select only projector mode it's shows no signal in projector what is the issue sir
Sir when i connect dvr to monitor with vga cable and swich on dvr that time moniter show dvr booting (HIKVISION NAME) but then moniter show black screen AND same dvr get ping but not connected in neither software nor web browser how to solve
I certainly learnt something there about not using a VGA cable that is too long as it can damage the circuitry 👍
Thx For the video, I appreciate the simple solution ,cheaper than buying a monitor with HDMI
im having the same issue except the vga behind the tv appears damaged, can i use that same converter and plug the vga end to the dvr and the hdmi to the tv?
Here's one for you.
I have a analogue dvr there are no audio inputs on it at all, I have purchased a microphone and connected it to a camera, i'M USING THE HDMI PORT TO STREAM TO THE TV, if I used a VGA converter would I be able to get audio from the microphone recorded on the dvr?
Having an issue where the DVR is working with VGA but cant get any video from HDMI on a TV. Any solution?
@lorex i bought new 8ch nvr 2018 model now not working but still power on video output not working my moniter vga/hdmi also check how to solve this.?
Good tiching karte hai 👌👍👌👌👌
Great video! Thanks. My DVR-5680 unit is brand new and the VGA doesn’t work, so I’m using your method. Frustrating for a new unit
Turns out, as suggested by @Bob Bakley, it was the settings for my unit. I hooked it up to my TV using HDMI and the resolution was too high for my small monitor to handle through VGA. Dropped the resolution in settings, plugged in the VGA to my monitor and it came up. Thanks for your advice Bob
Pls help me to fix my Xvr dahua no signal on hdmi at all i think the monitor of hdmi broke bc of the cable of hmdi 10 miters 😰
Check the display settings in the menu. The VGA output has different resolutions than are available with the HDMI. I can't remember exactly what the exact settings are. In these less expensive units they can't output different settings for each dsiplay type.
its 1080 and it went dead. The output fo the HDMI is still 1080 and the monitor works fine. Fault was the vga, thanks for your comment. I should have stated that in the video.
No problem, I set one of these up for a neighbor of mine and he wanted to use both a dedicated monitor using the VGA output and run HDMI to his TV set. There wasn't a setting that allowed both outputs to function at the same time, it was one or the other.
Truth Warrior Thank you bro
I’ll check my settings as my unit is brand new and VGA doesn’t work but HDMI does
Great advice @Bob Bakley, it was the settings. I hooked up on my TV and the resolution was too high for
My monitor to handle. Dropped the resolution in settings, plugged in the VGA to my monitor and it came up. Thanks for your advice!
Sir how to connect laptop with it
I have a question can you connect two monitors into the camera system the HDMI and the other
yes
yes
It’s the wire ( VGA to old) you need 1080p VGA
IAM using VGA to HDMI converter in my laptop Hp pavilion dv 6000 to connect with my projector it works properly in duplicate mode it shows both display proper in laptop as well as in projector but when I select only projector mode it's shows no signal in projector what is the issue sir
are you using Intel drivers? Please check you graphics settings on your laptop and scale according to projectors specs.
I did this and not getting no signal
Sir when i connect dvr to monitor with vga cable and swich on dvr that time moniter show dvr booting (HIKVISION NAME) but then moniter show black screen AND same dvr get ping but not connected in neither software nor web browser how to solve
can you try log in via web interface? Can you try plug in monitor on HDMI port, can you try monitor in different resolution setting?
@@ecologicaltime yes i try to changed resolution, dvr not open in web browser but i get ping and hdmi port not available on dvr
I don't have hdmi