How to use Menzerna 3 in 1 Polish for your car (Full Guide)- great results with mirror like finish
ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2024
- How to make your cars paint look like new for under $35.
Welcome to my channel .
I post lots of car videos every week which include car polishes and wax reviews and car D.I.Y maintenance videos.
My Channel:
/ thedocmackcarchannel
Follow me on:
thedocmackcarchannel
/ thedocmackcarchannel
Where to buy the Menzerna 1 step in New Zealand:
www.unitedcarc...
Where to buy the Menzerna 3 in 1:
amzn.to/2SxpzKV
Chemical guys orange pad :
amzn.to/2YsevT6
Chemical guys white pad :
amzn.to/2W15D5r
Chemical Guys Finishing pad :
amzn.to/2KR172S
Meguiars Clay bar kit:
amzn.to/35oAZ99
Mothers Claybar kit:
amzn.to/3bUK3F4
How to Claybar the car:
• How to Clay Bar your c...
How to use the Menzerna HC400
• Menzerna HC400 Polish ...
Thank you very much I saw this video and had to subscribe I really appreciate you sharing
@@Antonio-mg9ul Thank you. You are most welcome.
Those drop down speech bars made me skip the video. Also you're going to quickly over the panels, not giving the product time to work. And the dangling cord, ouch.
Brother should I need finishing pad? Or it’s enough if I use medium cut pad
Hi there , you can use a finishing pad. Medium pad will do it, but if you use a finish pad you will get a bit more gloss. Please consider subscribing to my TH-cam Channel for free if you haven't already to show your support.
@@DocMackGarage I alrady subscribe you , I have some question , please answer, can I compounding car at outside, or I need studio, basically I am running mobile detailing business, so don’t have shop right now, coustomer asking to remove some sworl marks and some deep scratches
@guitarandcalisthenics9751 Thanks , indoors is better as outdoors have a risk of leaves or debris flying while detailing which might cause scratches. .
@@DocMackGarage than what should I do , should I need to wait for studio?
@@DocMackGarage it will be better if you share your insta id, I have some more questions
Good job 👍
Many thanks for the comment. Please consider Subscribing if you haven't already. I have alot of DIY car videos and post a new one every Thursday or Friday. Show your support :)
@@DocMackGarage new sub here 👍
@@lav773 Many Thanks . I really appreciate your support 😊
After the final soft polishing can I apply ceramic coating? Thank you
@@duranopaulo Hi, generally if it is just polish without wax it would be fine , but this Menzerna has some added wax. It should be fine (try a bit in a small area to test), as the ceramic coating needs a surface to bond to. If it is slippery (wax), then it may not adhere to the paint as well as non waxed paint. I am going to post a video of me trying out a form of ceramic coating on this car within the next 2 weeks
Эксцентрик 15 мм ?
can the cord of the polisher scratch the vehicle?
Hi Kenny, I had responded earlier but the response went missing. Yes if the wire picks up grit from the ground , and you let the wire touch the paint work, it can scratch the car. This is why I place the wire over my shoulder (described in the video). Please consider Subscribing if you haven't already. It is Free to Subscribe to my TH-cam Channel. I have lots of car videos.
hi bro, nice to meet you I asked for the purchase link Menzerna 3 in 1 250ml for the Indonesian region thank you
Hi, sorry for the late reply. Did you find it ?
Good vídeo good
Thank you. Please consider subscribing to my TH-cam Channel for free if you haven't already.
So with this process waxing the car after is not needed ?
Hi there, no need to wax as it contains some wax . You can however boost it with some wax if you would like to. Remember to Subscribe to my TH-cam Channel for free.
hy, great job. I wanna use menzerna 3in1, it is ok to use after menzerna power lock ? need ceramic coat after that? Thank u.
Hi, thanks for the comment. I would recommend 3 in 1 , then powerlock and not the other way around . Remember to Subscribe, and additionally feel free to hit the Thanks button on the bottom of this video where you can donate to the channel.
Is a Diminishing abrasive .. Every time you put a new dots of polish you start again... Take this in cosideration ... Priming every time you buff a new side
Hi thanks for contributing to the comments , and I don't think there is a hard and fast rule to polishing. What I do is prime the pad with polish when it is dry, once I have done the first section, and I notice less product on the pad, I will add a few more dots. I only used medium cutting and finishing . I did the whole car in one go, if I had left it a day or so, I would have primed it again . Thanks for watching and please Subscribe.
How many times you go over the whole car with medium pad
Hi, between 1 and 2 times. Really depends on the imperfections you have to remove . If your paint is not so good, then start with a coarse polishing pad, the medium, then fine. Please consider Subscribing to my channel if you haven't already.
Very nice dont have money for a machine hope by hand looks good any comments looks beautiful
Hi Ken, Many thanks for your comments. Please consider Subscribing if you haven't already. You can try it by hand as well , I was using a dual action polisher , but you can get a palm polisher which is relatively cost friendly. The other thing you can try it with is an applicator pad .
@@DocMackGarage thanks for your help
You are welcome. Did you Subscribe?
If you are going over the vehicle twice doesn’t that kind of take the point of a one step polish away.
Good question, it is a question of steps vs passes. Steps is pad + polish, and pass is how many times you go over. Please consider subscribing to my TH-cam Channel for free if you haven't already.
How long does its effect last ????
Hi, it has been about 90 days since I polished the car, and it still looks good. I can't say how long it will last though. Please Subscribe if you haven't already . It is completely FREE to Subscribe. I post lots of videos.
Just by you keep on about subscribing made me just skip the video
What buffer is that?
That is the DAS6 Pro Dual action polisher. Consider Subscribing to my TH-cam Channel if you haven't already. It is free to Subscribe.
Too much shite talk at the start i decided not to watch the rest
Sorry you feel that way, I provide free advice and I share my expert opinion and expertise. If you don't have time for this , then probably this is not the video for you.
@@DocMackGarage i didnt mean to be rude,some people like a lot of talking and explanation some dont, i didnt read the video title fully and i should have i apologize bro
@@kco4991 No worries bro, apology accepted :) 👍