According to the descriptions I've read, each terminal has a 2A resettable fuse built in but it looked like you were able to draw 10A without tripping the fuse?
It is possible that the description from the seller is incorrect because the current drawn from the power supply in the case of the DC voltage of 12 volts is 27 amperes according to the data printed on the power supply So I expect the power to be 240 watts, not 24 watts, and in this case, the current drawn is 20 amps and the fuse remains 20 amps, not 2 amps I was doing my tests on this, but the power supply was damaged after drawing 15 amps as a result of this power supply is very old.
@@LEQSBeaprofessional Notably, other designs of ATX PSU break out board tend to include 5 A fuses. I wonder how much current the PCB traces can sustain and whether an ATX power supply is happy providing it's full power through the motherboard power connector. Maybe there is 2 A polysilicon fuse is on the adjustable voltage terminal (1.8-10.8 V)?
@@rupert274 Maybe and High probability, if my power supply was still working I would have taken a test on the adjustable voltage terminal (1.8-10.8 V) to determine the max drawn current and told you so, but unfortunately, the power supply has been damaged.
فيه أنواع كتيير على علي اكسبريس بس ده بيرجع للمواصفات اللي حضرتك عايزها مثل الفولت والأمبير وهل فيه وحدة كونترول مستقلة بيتم توصيلها على أي باورسبلاي مستقل أم هي واصلة بالفعل على باورسبلاي كوحدة واحدة وهل هي بها أي مؤشرات للفولت أو الأمبير أو القدرة أم بدون مؤشرات
@@kareemfarrag9713 I think it is considered as a distributor because it takes its DC voltage from the computer power supply and therefore it depends on the computer power supply you are using
هذا بالنسبة لهذا النوع من الباورسبلاي جهد دخله 127 فولت ولكن اذا استخدمت باورسبلاي آخر جهده مثلا 220 فولت فاقرأ الداتا المسجلة عليه لمعرفة الأمبير المناظر لكل جهد خرج
According to the descriptions I've read, each terminal has a 2A resettable fuse built in but it looked like you were able to draw 10A without tripping the fuse?
It is possible that the description from the seller is incorrect because the current drawn from the power supply in the case of the DC voltage of 12 volts is 27 amperes according to the data printed on the power supply
So I expect the power to be 240 watts, not 24 watts, and in this case, the current drawn is 20 amps and the fuse remains 20 amps, not 2 amps
I was doing my tests on this, but the power supply was damaged after drawing 15 amps as a result of this power supply is very old.
@@LEQSBeaprofessional Notably, other designs of ATX PSU break out board tend to include 5 A fuses. I wonder how much current the PCB traces can sustain and whether an ATX power supply is happy providing it's full power through the motherboard power connector. Maybe there is 2 A polysilicon fuse is on the adjustable voltage terminal (1.8-10.8 V)?
@@rupert274 Maybe and High probability, if my power supply was still working I would have taken a test on the adjustable voltage terminal (1.8-10.8 V) to determine the max drawn current and told you so, but unfortunately, the power supply has been damaged.
What is the name of ic that above knob (U3) ?
In fact, I am currently in another country now and I do not have this module at the moment to tell you about the IC number... I'm sorry
كيفية التعديل عليها وإضافة عداد امبير ؟
ارخص باور سبلاي في AliExpress بكام ؟
ازاي اضيف مؤشر امبير ؟
فيه أنواع كتيير على علي اكسبريس بس ده بيرجع للمواصفات اللي حضرتك عايزها مثل الفولت والأمبير وهل فيه وحدة كونترول مستقلة بيتم توصيلها على أي باورسبلاي مستقل أم هي واصلة بالفعل على باورسبلاي كوحدة واحدة وهل هي بها أي مؤشرات للفولت أو الأمبير أو القدرة أم بدون مؤشرات
Is there a better one than this ?
I think that's fine, but there are many different types of purchasing sites
Can I charge my tablet 3.7v ?
yes, you can charge
@@LEQSBeaprofessional can it be a 100% dc power supply alternative ?
@@kareemfarrag9713 I think it is considered as a distributor because it takes its DC voltage from the computer power supply and therefore it depends on the computer power supply you are using
My curiousity is: is this open source schematics?
In fact, I do not know, but I think that there are many circuit schematic diagrams on the Internet that do the same thing
How to get high current ?
03:49 في الدقيقة يظهر الجهود والتيارات
هذا بالنسبة لهذا النوع من الباورسبلاي جهد دخله 127 فولت ولكن اذا استخدمت باورسبلاي آخر جهده مثلا 220 فولت فاقرأ الداتا المسجلة عليه لمعرفة الأمبير المناظر لكل جهد خرج
I have one but it burned
Is there a schematic?
(i have touch sensor)
ver.31
ZYX-9SP
للاسف أنا معنديش ليها رسم للدائرة .. حاول تبحث فيي المنتديات والانترنت على رسم الدائرة الخاصة بها وكيفية التعديل عليها لتوصيل عداد الأمبير
How to get the cables for it ?
Cables for what purpose?
@@LEQSBeaprofessional for recharging tablet battery
@@kareemfarrag9713 Aliexpress
how to make that circuit 5:01
Could you explain what you mean?
Remove music because it is haram
الله يبارك فيك
هحاول ان شاء الله