Smart Home using Tasmota ESP8266 NodeMCU Alexa controlled relay | IoT Project 2021
ฝัง
- เผยแพร่เมื่อ 11 ก.ค. 2021
- In this IoT project, I have explained how to make the smart home using Tasmota ESP8266 NodeMCU Alexa controlled relay to control appliances with Amazon Alexa and manual switches. You can monitor the real-time feedback and also control the relays manually from switches without the internet. And the most amazing part is I have used all FREE tools and you don't need any coding knowledge to make this voice control smart home system.
$2 for 1-4 Layer PCBs, Get SMT Coupons: jlcpcb.com/RHS
Download PCB Gerber file for this NodeMCU IoT based home automation project
drive.google.com/uc?export=do...
Visit the following website to get electronics components, modules at a very reasonable price
utsource.net?source=TH-cam
During the IoT tutorial video, I have covered the following topics:
00:36 Control appliances with Tasmota Alexa using ESP8266
01:21 Control ESP8266 NodeMCU without internet.
02:01 Required Components for this ESP8266 IoT project.
02:23 Circuit diagram of ESP8266 Alexa home automation project.
03:56 Download the Tasmotizer & Tasmota release from Github.
04:32 Flash ESP8266 NodeMCU with Tasmota firmware.
05:39 How to set up Tasmota for ESP8266.
08:44 Tasmota Alexa integration.
09:33 Setup Amazon Alexa App to add Tasmota devices.
10:17 How to resolve Tasmota Alexa not working
10:32 Control relays with voice using Amazon Alexa App and buttons.
Required Components for each room for this NodeMCU home automation
1. ESP8266 NodeMCU 1.0
2. 4-channel 5V SPDT Relay Module
3. Push Buttons or Switches
4. Amazon Echo Dot
Amazon India Affiliate links:
NodeMCU : amzn.to/3fJA4EG
4-channel 5V Relay Module : amzn.to/2BQ5Y3o
Echo Dot Alexa(4th Gen) : amzn.to/3srCiPA
Amazon United States Affiliate links:
NodeMCU : amzn.to/2WoR2A2
4-channel 5V Relay Module : amzn.to/3r2HuJ4
Required Components for the NodeMCU control Relay Module PCB:
1. Relays 5v (SPDT) (4 no)
2. BC547 Transistors (4 no)
3. PC817 Optocuplors (4 no)
4. 510-ohm 0.25-watt Resistor (4 no) (R1 -- R4)
5. 1k 0.25-watt Resistors (5 no) (R5 -- R9)
6. LED 5-mm (5 no)
7. 1N4007 Diodes (5 no) (D1 -- D5)
8. Push Buttons (4 no)
9. Terminal Connectors
10. 5V DC supply
Important Points:
1. You need an Alexa device like Echo Dot for this project.
2. For no device found error, restart the Echo Dot and try again.
3. The NodeMCU and Echo Dot must be connected with the same Wi-Fi.
4. The Boot will fail if the D3 (GPIO-0) (switch-2) and SD3 (switch-1) pins are connected with the ground during booting.
5. If you use Switch (latched), make sure the switch-1 and switch-2 should be OFF during the ESP8266 Boot.
6. Please take proper safety precautions while working with High Voltage.
7. All the tools used are open source and FREE.
Important Links:
Tasmota Firmware Download:
ota.tasmota.com/tasmota/release/
Tasmotizer Download:
github.com/tasmota/tasmotizer...
__________________________________________________________
We need your support 🙏🏻 to make Tech StudyCell sustainable.
Help my projects on Patreon: / techstudycell
Feel free to donate any amount: paypal.me/sdaspay
__________________________________________________________
During the Tasmota tutorial video, I have explained all the steps to make this NodeMCU ESP8266 smart home system with Tasmota to control the home appliances with and without the internet. I have also shown how to connect Amazon Alexa with Tasmota to control the relays with voice commands.
So with this smart house project, without writing a single line code, you can convert any appliance to IoT devices and control them through the internet.
Now you can just say "Alexa, turn on Light" to control the home appliances.
#internetofthings #tasmota #alexa
-------------------------------------------------------
Thanks For Watching...
✅ SUBSCRIBE ✅LIKE ✅SHARE ✅ COMMENTS
Find out more such projects: iotcircuithub.com/
Facebook: / techstudycell
Instagram: / techstudycell
Telegram: t.me/techstudycell/
Twitter: / techstudycell
-------------------------------------------------------
Other useful Internet of things projects:
Latest NodeMCU projects playlist:
• NodeMCU Projects
Latest ESP32 projects playlist:
• ESP32 Projects
ESP32 Smart Home System with Amazon Alexa app & Manual Switches
• ESP32 Smart Home Syste...
Smart Home with Google Assistant & Alexa using NodeMCU ESP8266
• Smart Home with Google... - วิทยาศาสตร์และเทคโนโลยี
![[Full Episode] Hell's Kitchen Thailand EP.15 | 19 พ.ค. 67](http://i.ytimg.com/vi/Mx0ColswPls/mqdefault.jpg)
Thanks for the awesome video it was easy and well explained ^^ I made a bit diffrent project but this helped me out a lot =) It made me a subscriber aswell ^^
I am very new to this...
How are you powering on the nodemcu after it has been configured? Direct AC current wnt do it.. so another DC power adapter?
Very nice video Sr ,but why do i need to add 2. BC547 Transistors (4 no)
3. PC817 Optocuplors (4 no)
4. 510-ohm 0.25-watt Resistor (4 no) (R1 -- R4)
5. 1k 0.25-watt Resistors (5 no) (R5 -- R9) for this project .Can't i control the relays directly from the esp8266?I'm a dummie in electronics!!! :(
I've planned to make this entire setup to my newly constructed house. Will there be any issues or it can work forever?
This is the easy way to configure an esp8266 with Alexa and Tasmota. please can you do the same project with Sinric Pro, Thank you
Hello sir can I use touch switch module in the place of push button or traditional switch, if yes then please make a video on it or just share a circuit diagram. Thank in advance.
Thanks sir, 👍 I done this project..
Привет! Подскажи подойдёт Echo Dot 2nd Gen?? Или обязательно 3nd Gen??
Excelente todos tus aportes. Gracias. Espero poder hacer alguno de tus proyectos. Una pregunta, los interruptores de pared de 220V quedan anulados? O hay forma de seguir utilizando? Gracias
Thanks, here relays are connected with 220V circuit. And switches are connected with ESP8266.
Bro working this project real👍🏽✨✨✨✨🤜🏽🤛🏽 i made this project simple
Great job and Nice explanation sir👍
Thanks
sorry im really new in this, can be done with outlets and a relay module of 6?
by the way thanks for sharing new genaration
Great 🎉❤🎉❤🎉
Have you made solar or car battery voltage monitor with esp?
hello, nice project, is that possible to get the complete schematic, i need to make my personnal PCB, best regards
Suppose you want to connect fans and other appliances is it the same ?
i got this to work, i just could not get the esp32 with 8 relays work at all. i like to know can i use the smart life/tuya app to work with it?
Hi Bro. This project can control Smart Home with Smart Life App?
Great tutorial, i have a question. Is it applicable for esp 01 for just 2 switches?
Yes
Hi I asked a question sir, how to connect touch switched in the place of manual switches, and also I want to know that is it necessary to connect the usb also through power or laptop, becoz when I working with laptop realy is working fine but when I removed the usb and connect the circuit with power supply it don't dim the light realy not doing click sound and off led light. Sir please remove, I already purchased all devices so, it's loss for me.
can you make same video with Tasmota + NodeMCU ESP8266 + Google Home/Google Assistant
or
How to replace echo dot with Google Home in same project
thank you, big help
First like and comment ❤️
Thanks
@@TechStudyCell bhai can you make the same with esp12f or esp12e module... Which can save money and also look compact?
This is what I want to do but with lora modules. Can I connect a esp running tasmota to a lora device so the lora sends mqtt?
Power supply how Amp Required maximum ?
Do jlcpcb have custom duty now….?
çok teşekürler
I noticed JLPCB now has aluminum for heat dissipation. Are these pcbs as strong as FR4?
Single-sided aluminum PCBs are intended for power LEDs. Maybe also for power transistors.
But the aluminum PCBs are harder to solder.
Well explained... Thanks for sharing 👍👍👍👍👍
Welcome
Hi, I'm trying to do this with NodeMcu esp8266-12f, but I don't understand, the relay output is always on and doesn't act on the switch, can you help me?
Nice video ❤Thank
Can you please make the same with added blynk app
Super
👏👏👏
Thanks
hello! I can't get the model to work when using a toggle switch. when I connect it to ground, it makes the device reset. can you help me with this problem?
hi can i use any gpio pins or..should i only use the pins you showed?
You can use any GPIO.
Hello Techstudy cell
How can we add a function of gpio state recall in case of power outage.
It would be nice to see Lamps which were Turned on before power outage to be turned on too when power is restored.
I hope you understand me friend
This project already has this features.
Here is can see the voice command overrides the physical switches.. IS it possible to use Alexa to on/off light when the physical switch is ON. Means first priority is to be the switch.if it's on then u can use voice commands
In this project there is no specific on & off position for switch. And the switch is connected with the esp8266. So when you press the switch, it will just change the current state.
@@TechStudyCell so as my switch board is installed in my room whats the way to add this integrated module to existing switches board
is alexa speaker is must needed for the project or I can add devices and control them by alexa mobile application only?
Alexa echo device required.
Great Project.
How can we use without echo dot only mobile alexa
No. You need an Alexa device
Is it possible to integrate this with google home?
Bro how to install bin file using Android?
Is it compatibile with Google home?
Excelente aporte, felicidades, una consulta Alexa lo puedo usar desde mi celular con la Apk?? o es necesario comprar el Asistente. Gracias por tu respuesta
Yeah This guy explained it in other video
why app alexa dont detect to esp8266 if the echo dot is not conected? thanks
Sir online class start karo sir zoom ap sa with fee plz sir all information ka sat
ok i understood, but if nodemcu fails then how to operate manually
Is it work on eWeLink aap ???
Is it required internet, only router is enough right , if we exclude Alexa. Everything configured locally
@Sai Venkata Saran Madugula here no server, only that application will handle.. we can access that dash board from our mobile also. No other applications required
@Sai Venkata Saran Madugula how do we give constant ip? Is any settings required for that and is it had any chance to change ip of device,?
@@vsrkraju7147 change in router page of your router
can i program esp8266 with handphone with tasmota app ?
SSR 40 DA 3-32 v DC is active low relay module or active high relay module??? please reply
Active low
can y dom something like that for google home
baysub kiahali'' can i ask what application you can design for pcb layout? i'm greatfull if you'r reaply
Diptrace
I am getting problem. When power off and device starts it doesn't power on correctly and does not connect to wifi.
No matter how many time I restart.
But when if pulled enable pin down and pulled up while power is on device started.
i use ESP32 module erro is invalid of packet (0*46) what can i do to work tesmota to esp32 module
this bin file workfor ESP32 yes or no
it works for manual and with the website but it's not working with Alexa and my Alexa app says no device found
How to edit the your PCB file
Can Google assistant connect with tasmota?
Hi bro I need your help some of the files can't download
Can we use this project without eco doc only by Amazon Alexa and Google home app
No. You need an echo dot
Can we use this project with phone Alexa app by voice command if we don't have Alexa device?
No. You need a Alexa device
Hi someone knows how to make a trigger with tasmota to use on Alexa
Sir what will you prefer tasmota or espalexa?
Tasmota
Its work Esp 32
can we use echo show 5 or echo show 8 alexa( i have tried with these but does not work) instead of alexa echo dot .
si, se puede utilizar con todos los dispositivos Alexa
I don't get any logs shown after flashing
Why is that ?
after time it shouts down and i need to reset it to work again. why is that?
good morning can I combine it with home assistant if so how? Thank you
Create MQTT user and configure the esp device via the mqtt configuration with your home assistant server IP and user you have created above. You can control from home assistant directly without Alexa if you want
Mobile se kaise program kare
Can it remember previous states when. A power cut take place and electricity is back?
yes
Thanks, why it losses its wifi connection after disconnect the usb, and nevert connects again.
After that can you control it with Alexa. Make sure switch2 turns off during reboot.
Can we give 5v from Esp8266 to 5v 4-Channel Relay Module from USB?
yes. you can use Vin pin
broo i cant find it in alexa
plz help me broo
Can we use Mi led tv on 5V 4 Channel Realy
Yes
Pls reply to my question on the motion sensor light video. PLEASE
Please check the circuit
hola, una duda, yo no tengo el echo dot... porque la app del telefono no detecta por si sola a la ESP8266 sin el echo dot?
debe detectarla, es independiente de que tengas dispositivo Alexa o no.
Can I use esp32... And can I use 8 channel relay to control more devices?
@Sai Venkata Saran Madugula hi how to program esp12e? i dont have nodemcu
@Sai Venkata Saran Madugula hey as you said you are using with esp12e... How good is it? And what abt response speed and manual switches?
@Sai Venkata Saran Madugula I ordered all stuffs needed... Let's see how it works with esp12e.. Thanks for the replay dude
@Sai Venkata Saran Madugula hi dude..i really need your help...i need a circuit diagram for esp12e...i tired all ways but not working..please can your share your circuit diagram please
Need circuit with no switches
Why I’m not able to discover it using alexa device?
Can you Use Google assistant insted of alexa
No
The tasmota can work only with the app? Without the echo dot ?
No.. you need echo device
@@TechStudyCell Thanks
You can try with Home assistant and their mobile client if you don’t want to use Alexa
Bom dia. Se possível poderia fazer um vídeo de como voltar o firmware de fabrica, passo a passo. Desde já agradeço
Hi... Can we control fan speed with tasmota
Через ШИМ сигнал, например через твердотельное реле или симистр
i am not getting the IP. 0.0.0.0 is coming everytime
Make eep rom Home automation with esp32 and 8 channel relay
Noted
Wi-Fi +Bluetooth +IR remote+ manual make a video esp 32
Noted
@@TechStudyCell yes, please do it sir asap...
Device unavailable problem many times. Long run use.
Remember Last state after power cut?
bro i dont have the echo dot device, i have the amazon alexa app but it cant connect the tasmota or node mcu pls help
For this project, you need echo dot
Sir is it possible with 16 module relay??
No
i like this project, but i have a problem when i connect it with alexa app, when discover devices always fail "no new devices found" please help me how to solve this problem.
You need a echo dot, first check if the device are already connected in Amazon Alexa App
What about more relay and switch should I add accordingly 5 6 7 8 and select GPIO in configuration that way?
With out using the manual switch did i want to change the code??
No. Just don't map the GPIO used for switch
@@TechStudyCell i have some dobut canu help
when relays are on status from tasmota toggle button and switch status is on position then how to off the relays
Click on the Toggle Button to change the current state.
@@TechStudyCell I mean can we do it with switch
Yes
Com port is not detecting node MCU what to do sir??
Install driver in PC
Bro if I clicked Tasmota.bin file it going to (VLC media player)
That is a bin file don't open
Echo dot ki jagah mobile Alexa app se kaise oparate kare
Echo dot required
if I disconnect nodeMCU from laptop and connect the 5 volt power supply, than unresponsive. please suggest.
Use a stable 5 v supply. Please check the important points mentioned in description
@@TechStudyCell stable means?? I will give extra power from usb also??
Can u resolve??
If yes please guide I am also facing same problem
No, still no solution
Wifi and manual control fan regulater
Okay
@@TechStudyCell
Thank you
When the electricity goes back and forth, the tasmota does not reconnect to the network. Can you help?
operate with switch