Hi I am Hiroto. Thanks for your comment, LordCarpenter! It is not a special thing. It is a matter of course to use tools with care. But I am glad! Thank you 😊.
Hi Glenn Crandall. Thank you for all your comments! Have a great day and stay safe." It's a good phrase, I really like it. That's encouraging! Thank you!
Arigato Yamazaki San a pleasure to watch your videos. I will try and make this improvement on my Makita too. I hope Makita will notice your efforts to improve their tools. 🎏⛩🙏🏽
Hello! Thanks a lot for your comments, Rich Klee! You should definitely give it a try 😆. Makita does not need any improvements. I enjoy improving it to make it easier for me to use.
Hello Matthew Bickley. Thank you for your comment! So glad you're looking forward to it! What a nice comment! I'm so happy! I'll work on the next one! Thank you😆
Another great video sir! You've motivated me to finally do the same maintenance on my own miter saw. I hope 2022 is a safe year and everything you wish it to be for you and your family! Garrett
Hi I am Hiroto. Thanks for your comment, @dannoakl! I'm glad you like it! Thank you 😊 I can only make videos from time to time, but I will make videos that you will enjoy. Thanks for your support.
Hi I am Hiroto. J Armstrong, thanks for your comment! I am very glad, even if we don't live near each other, we are still friends. I will keep trying my best.
Отличное обслуживание инструмента. Очень нравится Ваш юмор и позитив! Привет из России! У вас совсем нет снега зимой? У нас уже выше пояса, но это ещё только половина. С Новым годом!
Здравствуйте, Михаил Тарасов! С Новым годом! Там, где я живу, выпадает снег, но он редко накапливается. Я никогда не был в России, но, похоже, там очень холодно. Позаботьтесь о себе. Хорошего дня😊
Відповідь Привіт Іван Третьяков. Дякую за коментар з України. Мене хвилює, що переклад правильний, але дякую, що переглянули моє відео. Я буду продовжувати робити все можливе.
Привіт, я Хірото. Руслан Байзаков, дякуємо за ваші коментарі! Мені дуже приємно 👍. Дозвольте поставити вам два запитання. Чи правильна мова - українська? Ви з України?
Nice work, sir. One question...would you shave the lower edge of the zero-clearance insert to allow for bevel cuts? That would widen the gap and defeat the purpose though?
Hi I am Hiroto. Hidden Gunman, thanks for your comment! If you do a bevel cut, the inside of the insert will be cut at an angle and the width will be slightly wider. But it will almost never cause the zero-clearance insert you made to lose its functionality.
@@craftbyhirotoyamazaki Странно конечно, что не доступна. Сборка Англия, но очень много людей жалуются на неё. Все говорят о заводском браке, так как при протяжке, пропил не ровный, а по дуге, доли миллиметра, но это есть так. Я сам это понял после покупки. Но также есть и опровержение. Якобы нужно подобрать диск на 60 зубов. С большим или меньшим количеством не подходит. Есть диск DIMAR по дереву, очень хорошего качества, хочу купить и попробовать.
@@olegdorofeev5786 Понятно, моя торцовочная пила была переделана различными способами. Но мне очень нравится процесс. Я как будто выращиваю из нее свою собственную торцовочную пилу.
Hi I am Hiroto. Nick Seidenman, thanks for your comment! That miter table was made before I started TH-cam, so I don't have a blueprint. Sorry about that.
Sir,good evening.marlon from philippines.i wonder what model is your miter saw!?its look like LS1018 high-breed into LS002g?and how much is the cost in Yen?arigato
Hi Marlon Vinarao, thanks for commenting from the Philippines! My miter saw is a Makita LS0717FL. When I bought it 5 years ago, it cost me about 70,000 yen.
I want to make it but I was wondering about it so I dicided to ask you. And BTW you deserve much respect wise man ❤️❤️🙏🙏. ありがとうございました。ギリシャ出身の日本の熱狂的なファンの皆さん、元気でいてくださいますように。私はあなたの人々があなたがそれをやった方法を誇りに思うと確信しています。
Γεια σας Απόστολος Βογιατζής, ευχαριστώ για το σχόλιό σας από την Ελλάδα! Δεν υπάρχει σημαντική ζημιά στο περίβλημα. Είναι λίγο καμένο. Και σας ευχαριστώ για το σχόλιό σας στα ιαπωνικά. Είμαι πολύ χαρούμενος.
When I want a laser, though, I don't want to be without one. If you have a laser, you can choose to use it or not use it, so I think you should choose one that has a laser👍
![[TH] VALORANT Champions Seoul - Semi-Final - SEN vs TH](http://i.ytimg.com/vi/IewhVY9cAmQ/mqdefault.jpg)
Nicely done! I really admire craftsmen who properly take care of their equipment.
Hi I am Hiroto.
Thanks for your comment, LordCarpenter!
It is not a special thing.
It is a matter of course to use tools with care.
But I am glad!
Thank you 😊.
You are doing a great job, keep it up my friend!!
Hello, Alán G!
Thanks for your comment!
great job, thank you!
I'll keep working on it😆
I love the subtle Japanese humour. 🙏
Hi I am Hiroto.
Wayne Powell, thanks for your comment!
I'm glad you like it.
Humor is hard 😅
ありがとうございます😊
Happy new year to you, too! - Humour + Serenity = Happiness - Wonderful video again. Thank you!
MiVyoo, AKEOME!
Thanks for all your comments!
It's so encouraging! Glad to hear it!
I'll try my best again next time😊✨
Your miter saw is a precision machine now. Thank you for sharing. Have a great day and stay safe.
Hi Glenn Crandall.
Thank you for all your comments!
Have a great day and stay safe."
It's a good phrase, I really like it.
That's encouraging! Thank you!
Arigato Yamazaki San a pleasure to watch your videos. I will try and make this improvement on my Makita too. I hope Makita will notice your efforts to improve their tools. 🎏⛩🙏🏽
Hello!
Thanks a lot for your comments, Rich Klee!
You should definitely give it a try 😆.
Makita does not need any improvements.
I enjoy improving it to make it easier for me to use.
YAY! i was so excited to see a new video from Hiroto. As always, thank you for the great tips and inspiration!
Hello Matthew Bickley.
Thank you for your comment!
So glad you're looking forward to it!
What a nice comment! I'm so happy!
I'll work on the next one!
Thank you😆
Another great video....
Hi Brian Davern!
Thanks for all your comments!
I hope this is a good reminder to maintain your tools.
I love seeing perfection. Your saw just became a work of art. Thank you for letting us see the transformation
Hi I am Hiroto.
N2 Guthrie, thanks for your comment!
It is very easy to use if you make this.
Highly recommended!
Another great video sir! You've motivated me to finally do the same maintenance on my own miter saw. I hope 2022 is a safe year and everything you wish it to be for you and your family! Garrett
Hi Garrett's Woodworx.
Thanks for your comment!
It's a pleasure! Thanks for taking the time to watch my video!
I wish you a happy new year.
Nice work !
Hello, captaincavern!
Thanks for commenting again!
I'm glad you enjoyed the video.
Thanks for watching the video.
I'll keep working on it!
Honestly I love this guy so much his vids are just entertaining and fun to watch
Hello!
Mokey Fry, thanks for your comment!
It is honestly the most pleasant comment I've received.
Thank you!
I hit the subscribe button at “rod of truth”. How can you not love that?
Hello!!!
Slappy Doolittle, thanks for your comment!
And thanks for subscribing!
Rod of truth! That thing is so useful👍
Thank you for sharing your experience! I’m inspired and I will look at my Makita’s fence and insert too!
Hi I am Hiroto.
Thanks @seanwatson8130 for your comment!
I'm glad you like it!
Thank you 😊
Have a great Year too! by the way - beautiful makita planer!!!!
Hi Efekt Muwow!
Thanks for your comment!
AKEOME!
My Makita canner is used, but I've maintained it shiny and nice!
Thank you🤗
Thanks for reminding me to check ✔ mine also. Have a Blessed day Hiroto.
Hi Sharon Tracy!
Thanks for your comment!
It's important to maintain your tools.
I hope you have a good day too.
I need to make a new plate for my tablesaw behind the blade. Excellent video tks!
Hi Raye Anne Penner, thanks for your comment!
I'm glad you like it.
Just making this board is so much work!
Great video - really enjoyed watching :-)
Hi I am Hiroto.
Stephen Reid, thanks for your comment!
And thanks for watching my video!
I'm glad you enjoyed it.
ありがとうございます😊
Such a pleasure watching these videos - lovely seeing such craftsmanship, and well made entertaining videos. Please do more!
Hi I am Hiroto.
Thanks for your comment, @dannoakl!
I'm glad you like it!
Thank you 😊
I can only make videos from time to time, but I will make videos that you will enjoy.
Thanks for your support.
Most enjoyable presentation!
Hi I am Hiroto.
Wallace Grommet, thanks for your comment!
It's my pleasure to be of service to you!
ありがとうございます😊
great work my dear brother hat's off.
Hi I am Hiroto.
nath krupa, thanks for your comment!
Thank you very much😊.
Have a nice day.
Wow
Hello, unkomi!
Comment? Thanks for a word!
WoW, I got it! Thank you!
I love the humor! I think you’re a good fellow; one I would not mind having as a friend if you lived near me. I could learn a lot from you.
Hi I am Hiroto.
J Armstrong, thanks for your comment!
I am very glad, even if we don't live near each other, we are still friends.
I will keep trying my best.
@@craftbyhirotoyamazaki 👍👍👍👍👍. Yes, definitely!
Copy that👍
Nice
Hello, Yare of the Daze!
Thanks for being the first to comment!
Thanks for the nice!
Well done.
Hi I am Hiroto.
Thanks for your comment, Shed Music!
Thank you very much 😊.
Thanks for Your hints !! Great job. 👍
Hello, H.R. Vogt! Thanks for your comment!
And thanks for watching my video!
I'm honored to be of service!
Nice! Thank for the tips!
Hi I am Hiroto.
Henrik Hedberg, thanks for your comment!
I'm glad you like it!
Thank you 😊.
Thanks for this video.
Hi I am Hiroto.
Brian Pinheiro, thanks for your comment!
I'm grateful to you, too.
Thanks for watching my video 😊
Fantastic video! Thank you!
Hi I am Hiroto.
Thanks for your comment, @pas0003!
I'm glad you like it!
Thank you 😊
Love it. Very entertaining
Hi I am Hiroto.
Alan Sadler, thanks for your comment!
I'm very happy to hear it.
Thank you!
ありがとう🇯🇵
That looks great, I’m going to do that to my Makita saw now😁👍🏻
Hi I am Hiroto.
Brian Makes Things, thanks for your comment!
Give it a try!
It will be very useful and very easy to use👍
Good job.
Hi I am Hiroto.
Thanks @sergejstarvids9656 for your comment!
Thank you 😊
I'm glad to hear it!
Thank you
Hi I am Hiroto.
Ian Gough, thanks for your comment!
Thank you, too.
I want to do this now!!!
Hello, Jasmine!
Thanks for your comment!
Let's do it! Let's do it right now!
Great tip and like your humor.
Keep up the good work.
Hello, Kevin Toye.
Thanks for your comment.
I'm very happy!
Me too! I'll keep working on it!
Thank you!
Thanks !!
Hi I am Hiroto.
Andy K, thanks for your comment!
Thank you too 😊
so great!
Hi I am Hiroto.
SZAN CHEN, thanks for your comment!
Thank you!
ありがとうございます😊
Super Film. Czekam na więcej.
Witam, Ryszard Nowicki.
Dziękuję za komentarz.
I dzięki za obejrzenie mojego filmiku!
Będziemy nad tym dalej pracować.
Very good sir....
Hi I am Hiroto.
Thanks for your comment, michaelumeyer!
I'm glad you like it!
Thank you 😊
woah!
i found your channel recently and im glad that i found it
your videos are soo informative and relaxing :)
楽しかったです。:D
Hello CosecSecCot. Thanks for your comment!
WOAH!!!
That's so great to hear, thanks for finding it!
Keep up the good work!
ありがとうございます😀
Отличное обслуживание инструмента. Очень нравится Ваш юмор и позитив! Привет из России! У вас совсем нет снега зимой? У нас уже выше пояса, но это ещё только половина. С Новым годом!
Здравствуйте, Михаил Тарасов! С Новым годом!
Там, где я живу, выпадает снег, но он редко накапливается.
Я никогда не был в России, но, похоже, там очень холодно.
Позаботьтесь о себе. Хорошего дня😊
your miter saw is incredible!i wish i have one of them so i can make my own samurai sword hehe
Hi, Zoe Oswald Jalandoni!
Thanks for your comment!
Even if you don't have a miter saw, you can still make a katana 👍 I hope you give it a try!
@@craftbyhirotoyamazaki どうもありがとうございます!
Nice job
Hi I am Hiroto.
Thanks for your comment, tim king!
I'm very glad!
ありがとうございます😊
My kana is loosing it's flatness , got any tips?
I'm not sure what kana is, but what part of your miter saw is no longer flat?
Відаю.
Дивлюсь твої відео із насолодою, дуже подобається дуже точна робота і приємна музика та ще з гумором👍👏👏👏😀🇺🇦
Відповідь Привіт Іван Третьяков.
Дякую за коментар з України.
Мене хвилює, що переклад правильний, але дякую, що переглянули моє відео.
Я буду продовжувати робити все можливе.
@@craftbyhirotoyamazaki 😀передал бездоганний.
Добра, здоров'я.
Було добре!
Класс, 👍
Привіт, я Хірото.
Руслан Байзаков, дякуємо за ваші коментарі!
Мені дуже приємно 👍.
Дозвольте поставити вам два запитання.
Чи правильна мова - українська?
Ви з України?
@@craftbyhirotoyamazaki здравствуйте, нет я из Кыргызстана
Дякую за відповідь.
З Киргизстану, Дякуємо за ваш коментар!
Якою мовою говорить Киргизстан?
Nice work, sir. One question...would you shave the lower edge of the zero-clearance insert to allow for bevel cuts? That would widen the gap and defeat the purpose though?
Hi I am Hiroto.
Hidden Gunman, thanks for your comment!
If you do a bevel cut, the inside of the insert will be cut at an angle and the width will be slightly wider.
But it will almost never cause the zero-clearance insert you made to lose its functionality.
Thanks for posting, reminds me of when I was stationed in Misawa, I’m considering getting this saw used. Still recommend?
Hi I am Hiroto.
Randy York, thanks for your comment!
Is Misawa in Aomori prefecture?
Makita is the best. We are still recommending 👍
ありがとうございます😊
Лучший!!!
Здравствуйте, меня зовут Хирото.
Олег Дорофеев, спасибо за ваш комментарий!
Это правильное слово?
Я очень, очень счастлива!
ありがとうございます😊
@@craftbyhirotoyamazaki Я хотел сказать, что Вы настоящий мастер !!!
У меня Макита LS 1219L, я тоже буду делать такое улучшение.
@@olegdorofeev5786 Спасибо!
Makita LS1219L!
Эта модель недоступна в Японии!
Я так завидую!
@@craftbyhirotoyamazaki Странно конечно, что не доступна. Сборка Англия, но очень много людей жалуются на неё. Все говорят о заводском браке, так как при протяжке, пропил не ровный, а по дуге, доли миллиметра, но это есть так. Я сам это понял после покупки. Но также есть и опровержение. Якобы нужно подобрать диск на 60 зубов. С большим или меньшим количеством не подходит. Есть диск DIMAR по дереву, очень хорошего качества, хочу купить и попробовать.
@@olegdorofeev5786 Понятно, моя торцовочная пила была переделана различными способами.
Но мне очень нравится процесс.
Я как будто выращиваю из нее свою собственную торцовочную пилу.
Your miter table is brilliant. Do you have a video (or at least the plans) available on-line somewhere?
Hi I am Hiroto.
Nick Seidenman, thanks for your comment!
That miter table was made before I started TH-cam, so I don't have a blueprint.
Sorry about that.
Thank you. I will try to guess at the design from what I see in the video.
Sorry, sir😅
Sir,good evening.marlon from philippines.i wonder what model is your miter saw!?its look like LS1018 high-breed into LS002g?and how much is the cost in Yen?arigato
Hi Marlon Vinarao, thanks for commenting from the Philippines!
My miter saw is a Makita LS0717FL.
When I bought it 5 years ago, it cost me about 70,000 yen.
Hey diesent the fire katana damage the sheath??
I want to make it but I was wondering about it so I dicided to ask you. And BTW you deserve much respect wise man ❤️❤️🙏🙏. ありがとうございました。ギリシャ出身の日本の熱狂的なファンの皆さん、元気でいてくださいますように。私はあなたの人々があなたがそれをやった方法を誇りに思うと確信しています。
Γεια σας Απόστολος Βογιατζής, ευχαριστώ για το σχόλιό σας από την Ελλάδα!
Δεν υπάρχει σημαντική ζημιά στο περίβλημα. Είναι λίγο καμένο.
Και σας ευχαριστώ για το σχόλιό σας στα ιαπωνικά.
Είμαι πολύ χαρούμενος.
ありがとうございます❤️
I mean LS1016L lower slide,LS1019L base,LS002G upper
I answered the question in one previous comment, so I hope that's not a problem😃
🤣😂🤣😂🖖
😊😀😆😂✨
Wear glasses buddy.
Hi I am Hiroto.
Thanks for your comment, @uthanwintun!
Roger that!
Great job!
Hi I am Hiroto.
Thanks for your comment, maxwell!
I'm very happy!
ありがとうございます😊
Hi, Is the laser worth bothering with?
Hi I am Hiroto.
Thanks @kevinkeelan354 for your comment!
That's different for everyone, isn't it?
@@craftbyhirotoyamazaki if it’s accurate it’s worth having. I’m about to order one and both versions are available.
When I want a laser, though, I don't want to be without one.
If you have a laser, you can choose to use it or not use it, so I think you should choose one that has a laser👍
Good job.
Hi I am Hiroto.
Thanks @sjfarrell2.03 for your comment!
Good comment!