Detailed! Mower Complete Service Craftsman Platinum 7.25 190 Briggs & Stratton Carburetor cleaning
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- Found another free mower! How to do a complete service maintenance on a Craftsman Platinum 7.25 190 CC Briggs & Stratton Lawnmower. This video will show you how to rebuild a carburetor metal type on a Craftsman Platinum. This video will show you how to replace a broken governor spring and a missing Air Vane Spring with a new set of springs. This video will also show you how to change a spark plug on Craftsman Platinum with Briggs & Stratton motor. In addition, I also drained the oil and filled it with synthetic oil.
In this video, I also showed how to adjust the throttle on this Craftsman Platinum lawnmower.
This lawnmower was leaking gas. The cause was the float valve aka needle and seat. It was missing a pin. Watch this video to learn how to fix the gas leak.
You can use the video to troubleshoot your Craftsman platinum 7.25 190cc Briggs & Stratton with 799866 Carburator or a 799868 Carburator.
Parts used in this video are below: Here are my amazon associate links
Briggs & Stratton Vane Springs: amzn.to/3paSLGb
Briggs & Stratton Governor Spring Set: amzn.to/3pap08H
Briggs & Stratton Craftsman Platinum 190 cc FF-10 Spark Plug amzn.to/3p5ztC9
Briggs & Stratton Carb Gasket Set: amzn.to/36cioOs
Briggs & Stratton Air Filter amzn.to/3eCwSdY
Briggs & Stratton Float Set amzn.to/32qxgYf
Briggs & Stratton Float Valve aka needle and seat amzn.to/36enrOi
This is NOT a sponsored video. All products featured in this video were purchased with my own money. Help us fund our channel’s next video by using the AMZN links above. The price is the same whether you use the link or not. As an Amazon Affiliate, we earn a few cents here and there to help fund our next video project. I am an Amazon Affiliate.
This video will show you the following fixes or repair or maintenance on a craftsman platinum lawnmower:
Gas leak craftsman platinum mower and how to repair it
Spark Plug removal and installation on a craftsman platinum lawnmower
Governor Spring Installation on a craftsman platinum lawnmower
Vane Spring Installation on a craftsman platinum lawnmower
Oil Change - how to drain or pump it out on a craftsman platinum lawnmower
How to Adjust Throttle on a craftsman platinum lawnmower
Rebuild carburetor on a craftsman platinum lawnmower
Clean Carburetor on a craftsman platinum lawnmower
How to change the air filter craftsman platinum lawnmower
This craftsman platinum mower has auto choke
Great video. I found a mower and followed your lead, except I purchased a carb. Mower works great and your instructions were perfect.
Well recorded and clearly explained. I have never attempted a carburetor repair before, but feel confident to do so after watching your video. Thanks!
Nice. I feel like I can open a lawn mower repair shop now. Thanks for the good and useful video boss
I fixed my lawnmower after watching your, I'm a hands on guys, so I know how to handle the tools, Thx and God Bless
I had a slow fuel leak on the same exact motor. Turns out there was never a gasket installed between the airbox and carb. But that actually probably saved it since it sat for two years. No fuel to gum up anything.
Thanks! Very helpful. Cleaned the carb on my identical mower. Runs like new now.
Great video. A friend just gave me one & thanks to your video, I got a few tips on what to look for.
Also, I have watched many repair videos, but yours was the first to use the hand siphone to remove the oil.
Thank you very much for watching and feedback! Really appreciate it.
Thanks for a fantastic video that explained very well how to do each step. I am just now learning how to maintain/repair things that are not working properly or simply keep what I have in good working order through proper maintenance. This video was enjoyable to watch, clear to understand and easy to see what you were doing. I actually laughed out loud and got a big, spontaneous smile on my face when the mower started up for you! You have a talent for teaching us beginners how to do stuff ourselves!
Thank you very much for watching and for the awesome feedback. I really appreciate it. Happy fixing…
If this video was any better I would want to pay for it...
Very good instructions and excellent resolution.
Your cleaning bowl looks suspiciously like a lighting fixture cover. If so, A+ for recycle & repurpose! Thanks for the video.
LOL! You are so right. Your discerning eyes are impressive. Thank you very much for watching and for an awesome feedback. Lol. Really appreciate it
Very clear and thorough - excellent video. Thanks!
Excellent video! Picture and sound, well done.
My 2014 build 7.25 Craftsman started knocking after the ignition coil was replaced.
I now need to figure out why.
Great video!
You are a life saver will check thus tommorow fingers crossed
Все понятно и доступно объяснил, молодец 👍
Very good video!
Where did you get the parts to repair and how do you know which parts to get if you have a different Briggs and Stratton mower.
Thanks in advance. Great video!
What size spark plug do I need on a Sears Craftsmen 190cc Platinum series 7.25?? I just bought this mower with no spark plug in it from a neighbor!
Do you have a video on starting. It has gas and oil. When I pull the cord it wines but doesn’t start
Did u fix it
Just what I needed I think I lost a spring
My mower has a "bubble" on the front of it.. Is it a "primer bulb" or a "purge bulb"? Thanks
I have this exact lawn mower. I was able to get it all fixed but the issue I'm having is where does that spring attach to on the carburetor mechanism
I noticed it didn't have an air filter! Hopefully, that mower hasn't been run with no filter!
Me thinks maybe the previous owner tried to clean the carb on their own, got frustrated, lost the pin maybe, slapped it back together and put it by the curb! LOL I am curious what the cost savings is of buying all those new parts vs. just replacing the carb? A quick search on Amazon and it looks like you can get a new set up for under $20 and some include the air filter and spark plug. Or is it just the joy of only throwing out what is necessary and re-using what isn't broken? Great video, thank you!
So true... you can find an aftermarket carb for a lot less. It will do for sure. It is definitely a hobby, for fun, and the joy out of fixing things. Thank you very much for watching and feedback
@@cbatilo I'm finishing a carb clean on my snow blower tomorrow, then I'll be tackling my lawn mower. I have been unable to nail down the carburetor part no. though. If you have any suggestions let me know. I have the original manual, but they don't show part numbers like they used to! Grrr
Did u leave the old valve gasket in? I see the new one came with a small gasket
hello, i got a john deere js26 and i think it has the same engine. i took off the air filter and i rinsed off the case and there was some oil that i could see mixing with the water. I checked the oil and it was empty. what do you think i should do? and do you have a detailed thing that shows how to take the whole engine apart and resemble?
What are the part numbers for the parts installed?
In general is this a good lawn mower?
What’s the best method of ordering parts? Amazon or through Briggs & Stratton?
What kind of oil use that machine
Hello there. I have the same mower and i wanted to order the same parts you did. Can you please share where did you order them and how? Thank you
Go to the video and click on or expand the video description- I placed all the links to the parts I ordrred
Do you know the part number for this mowers cable for the handle. Mine snapped and I can’t find it anywhere
5402 www.amazon.com/dp/B00004RB1K/ref=nosim?tag=cbatilohowto-20
How much oil goes in these ? Have the same mower need to change oil don't know how much to throw in lol
1quart... but pour only half initially. Check the level, then pour more into it (stop at 3/4 of a quart)... check the level again and slowly to top it off.
@@KaraGermanShepherdAdventure thank you sir I appreciate your help!
20 ounces or .625 quarts
Buy a new carb on line for $45. Do not mess with working on carb when the whole thing can be replaced for cheap. Just a few bolts.