He is half loading the bucket to make the crusher run in smooth and give the fines a chance to get through the griddle he is actually bang on just giving it enough time to clear then next bucket goes in.
Who thought taking an expensive piece of equipment like a 982 & charging the hopper of the first crusher from the end was a good idea, should be fired. Is the 982 a substitute for a smaller machine like a 950 that's in the shop for repairs? If not, anyone thinking the purchase of a 982 & underutilizing it like shown in the video; unless the company is planning an expansion, should also be fired.
@@evjone how would you know a jaw crusher is in good condition when looking to buy one, I could get my hands on an old Parker 30-18 but don't know much about them? I've seen it crush a few bricks and blocks but at suspiciously low rpm
@@atm451 The only way is to use your eyes and ears, run it. There are only one thing to worry about on old crushers,: The bearings, look for grease, look for damage, feel for heat while running, and most of all listen to it run. You can tell right away if this is going to be a 10K dollar repair coming up. Some old crushers has less value then a set of new main shaft bearings.
@@evjone I would have to travel a bit to see it in person. I uploaded 3 videos on my TH-cam channel of you would like to give me your opinion. I know there not great video , it's all I have to go on for now .. thanks 👍
He is half loading the bucket to make the crusher run in smooth and give the fines a chance to get through the griddle he is actually bang on just giving it enough time to clear then next bucket goes in.
That Jawcrusher is brutal, thanks for showing it to us.
I’d have liked to see more actual rock crushing!☘️👍
Nice video footage, is this is basalt being crushed and made into aggregate or gravel and road base material??
Love running a 982M vs the half steer.
sounds like around 300 RPM, is that close?
Why is he only half filling the loader bucket...clearly must be getting paid by the hour
Bloody good Crusher !!!!!!!!!!!!
but in poor condition...
Parabéns 👏👏🤝🤝🤝🤝
Хорошее видио 👍👍🔥
why was the one not fed directly into the other? why make the loader move the crushed?
the crusher is damaged, its only test running
he lets it run empty and thta big ass loader get on it son.. keep it flowing..
Bien poderosa!
any more?
Loading with an excavator prevents blockages and is WAAY Safer than men unblocking crusher
yep and you can see it keep it fed!! he lets it run out.. it's all about flow flow..
If anyone has any info on these Parker crushers it would be amazing we’ve been fighting ours for weeks now the jaw keeps plugging up
We had one , how worn are the jaw plates , rule #1 smooth don't crack rock efficiently .
Should've kept going with the video. Make it a longer Video.
Who thought taking an expensive piece of equipment like a 982 & charging the hopper of the first crusher from the end was a good idea, should be fired. Is the 982 a substitute for a smaller machine like a 950 that's in the shop for repairs? If not, anyone thinking the purchase of a 982 & underutilizing it like shown in the video; unless the company is planning an expansion, should also be fired.
Had similar thoughts tbh !!
plus the Crusher is not getting fed to its optimum
Whats the opening size?
I have a Parker jaw am trying to change the jaws in do you know any tricks
does it have hyraulic ram for pushing toggle?
Greased up dirty diesel yes I got them out it was easy once I figured it out
@@evjone how would you know a jaw crusher is in good condition when looking to buy one, I could get my hands on an old Parker 30-18 but don't know much about them? I've seen it crush a few bricks and blocks but at suspiciously low rpm
@@atm451 The only way is to use your eyes and ears, run it. There are only one thing to worry about on old crushers,: The bearings, look for grease, look for damage, feel for heat while running, and most of all listen to it run. You can tell right away if this is going to be a 10K dollar repair coming up. Some old crushers has less value then a set of new main shaft bearings.
@@evjone I would have to travel a bit to see it in person. I uploaded 3 videos on my TH-cam channel of you would like to give me your opinion. I know there not great video , it's all I have to go on for now .. thanks 👍
Maximus
This one looks old, I wonder what will be the price for the new one.
Hello, sir, you can get price of 【stone crusher】at our website:
www.chinafote.com/stone_crusher.html?ccY
Action at 2.33
V Edge on the 982 looks a pain in the arse
Is that operator onhis lunch or union ,,,a compnay could go broke with operators like that
No differently none union you can tell because he is slow and has garbage for a crusher plant.
so old jaw crusher
old and too high mintainance cost for modern production
The swing jaw is loose.
your eyes very good
gold mining?
more like testing old equipment...
Crusher is in a poor state !!!!!
i totally agree, its a heap ;)
I am Filipino new friend
I thought the title read “Jew crusher”…