IT TOOK A LONG TIME TO FREE UP JUST A QUARTER OF THE HOLE...IT'S INCREDIBLE HOW SUCH A BIG COMPANY DOESN'T HAVE A FLAT AND WIDE AND MUCH LONGER TIP MADE BY HITACHI THEY WOULD BE ABLE TO DO SO MUCH WORK IN HALF THE TIME THAT WASTE OF RESOURCES
This would overwhelm the following conveyors, hoppers, sieves, and crushers. As a high flow of fines would just slip down unstopped by the first crusher, because the most of the embeeded bolders would be crushed by one or two hits of the hanging cone. Not an engeneer, but common sense.
Чем больше я смотрю тем больше мне хочется сказать что эти работники сознательно и всячески затягивают процесс , специально посмотрел ещё несколько роликов и в этом убедился , вот что проще начать снизу и освободив участок помочь массе самой под собственным весом свалиться вниз но нет он упорно делает сверху вниз , я не знаю это просто нереальная тупизна либо способ показать кому-то свою значимость
How a company like this can still make money is totally beyond my comprehension! Tip 1: put a grapple on the crane that removes boulders from the crusher mouth, this will save at least 2-3 hours of crusher downtime on a 8 hour shift with many boulders! Tip 2: next time using the Hitachi digger to clear dirt as shown; ditch the hammer and put on a toothless 5 or 6 foot wide sandbucket, it will get the job done in 20% of the time showef in this clip! It looks like wasting time and money is the major goal for this company: terrible!
"Tip 1: put a grapple on the crane that removes boulders from the crusher mouth," Those boulders are 5-10 tons. Good luck with that grabber. " Tip 2: next time using the Hitachi digger to clear dirt as shown; ditch the hammer and put on a toothless 5 or 6 foot wide sandbucket" You mean like they do in *EVERY* other cleanup video? Just because they did not have a bucket at hand this time doesn't mean they always do it like this. "It looks like wasting time and money is the major goal for this company: terrible!" It's in India, there is no concept of efficiencey or speed, or safety, or environment. Don't project your "I need to get it done in five minutes or the boss will fire me" mentality on a different culture.
Well said ,Sir! The "advisor" (lol) is probably nothing than an "arm chair operator" who hasn't spent a day working in high heat with oppressive humidity.
I’m surprised you don’t have a long reach excavator with a root rake attachment, could have cleaned that pit out in about 5 minutes compared to this disaster of a performance shown here
Surely if there is that much built up on hopper walls requiring that amount of time to clean a small portion of it then surely the hopper is the wrong shape to be fit for purpose
All you need to do is put your hose nozzle on high mist for dust control, not soaking the crap out of your dumps. Too much water application will cause your crusher funnel crown to cake up, like what been happening here. Put a sift bucket on that boom, and a good operator that knows the funnel crown setup to do job quicker than the time wasters you got.
If the operator positioned the tracks sideways he'd have a better view of what he was doing. Also needed a spoon about a foot wide. Definitely start at the bottom so the material can fall away.
@@vinny142 The "avalanche" ist the best result you could reach !! Do you really think that moving sand will pull this excavator into the crusher ???? 😂
How about getting a rotary attachment similar to forestry mulchers and put on a plastic brush. Start it up at bottom, clear to metal, pull up slowly until you get tp top. Move over and repeat. Also, try using those LONG excavator booms that can reach the other side...
A foot or so increasing the angle of the infeed angle would sure help stop this buildup. A poor infeed could be solved when it was installed. The opperator can use a lot of lessons on how to clear the buildup bt sweeping from Left to Right starting at the bottom.
Why do the job at all if you are not going to at least remove 50+% of the material. Was he on a clock or told to stop and go to another location. So Sad
Schade das man an den Bagger keine flache breite Schaufel anbringen kann . Schneeschieber Zeit ist Geld It's a shame that you can't attach a flat, wide shovel to the excavator. Snow shovel Time is money
Ich weis auch nicht, die machen es sich wirklich schwerer als nötig, allein schon wenn ich sehe wie sie die verklemmte steine mit dem "Angelhacken" lösen. Junge Junge, was soll das? Da gehört sowas wie nen Greifer, wie man zb. auf eienem Schrottplatz benutzt, hin. Würde bestimmt schneller und besser funktionieren. Aber zum saubermachen würde eher ein Bagger oder ähnliches Gerät mit längeren ausleger und breiterer Schaufel ausprobieren. Und warum machen die nur halbe sachen, wenn schon dabei mal richtig säubern und nicht nach der hälfte aufhören. Versteh das nicht...
@@farmerkampi3583 Genau , man könnte z.B. ein Rohr an diesen Haken so anschweißen um ihn dann über Seile zu führen und mal eine Schippe zur Hand oder eine Spitze vorn am Haken oder über Erschütterung (Großer Hammer) das Erz lösen . Bei der Reinigung ganz unten anfangen links rechts hin und her . Machen wir eine Onlineberatung 🤔😅
@@farmerkampi3583 Wenn ich das sehe klappen mir die Zehennägel nach oben.Kann ich nicht nachvollziehen wie man solche Stümper in so einem großen Minenbetrieb beschäftigen kann.Die haben vieleicht auch Fachkräftemangel.😂😂😂😂😂
@@kurzschnautzert180 Ganz sicher, dort arbeiten, bis auf die jeweiligen Chefs nur Angelernte. Berufsausbildung, wie wir sie kennen, gibt es außerhalb von Europa kaum irgendwo auf der Welt. Learning by doing ist viel billiger und läßt die Leute unten. Wer was werden will geht studieren...
Glad I'm not the only one who watched this thinking what a waste of time. He probably put four times more hours on that equipment than needed. If all you have is a toothpick, you still start at the bottom and work your way up.
How about investing in some pneumatic or hydraulic hopper vibrators? Then you wouldn't be dealing with all this buildup. In the meantime, tell your excavator operator to start and the bottom and then work up...
"How about investing in some pneumatic or hydraulic hopper vibrators?" A) They need that buildup to protect the hopper from the 100Tons of rocks that each truck dumps into it. B) Each truck dumps 100tons of material, and you think you can just shake that hopper hard enough to dislodge material? C) If you start at the bottom and 200tons of ore buildup starts to slide down, your digger is going with it.
The only thing “amazing“ about this is the complete misuse of equipment to do a simple task. Who thought it was a good idea to clear a 30 foot wall of dirt with a 6 inch wide hammer attachment?
Realmente yo esperaba este maravilloso momento. Esta herramienta también sirve para desbloquear la entrada cuando se obstruye, y también para quebrar las rocas que por grandes no caben por la entrada de la trituradora de cono y así no se tienen que poner en la peligrosa labor de sacarlas con la grúa del techo. Felicitaciones.
Personally I'd have a long reach excavator with 60 ft of boom and a smooth edge ditch buck on it, start at the bottom and work my way up, second of all I would mount vibrators under the back side of that hopper to help with the removal of all that build up, too much down time.
Who came up with this idea? Tool completely inefficient, plus operator seems confused. A large bucket/fork would have that job done in an hour. Very poor management skills.
Use a 3 meter flat metal plate to move that sand 10 times faster 🤦🏻♂️ Sometimes i think this people get problems to think Now the admin is gonna give me a like because he dont understand..
Next time just for fun tell operator to stay in cab and drive machine and start at the bottom not the top and see how that works next time I seen hens do more damage than that operator
I'm absolutely amazed and appalled at the ethnocentric attitudes displayed by the vast majority of the comments. They show no regard for the cultural differences between the (obviously) western commentors and the Asian culture embodied in India. While there is some inefficiency in the methods used, the workers aren't just sitting around bemoaning the lack of "proper" equipment; they're just getting the job done with the tools they have. In a way, it kind of reminds me of what the American pioneers did - they used what they had and got the job done. It also calls to mind an old saying, "If you can't say something nice about someone, don't say anything at all."
Thank you, Chuck. But this is not the fastest or the best way to do this job. Even a little boy and his Tonka truck could do a better job. Hell, give me a straight edge shovel and safety rope setup!!
![ILLSLICK - KILLSHOT REMIX [FULL VERSION]](http://i.ytimg.com/vi/RIK8RrqIAzE/mqdefault.jpg)
Its really painful watching the wrong people using the wrong equipment in the wrong way.
It‘s so painful to watch such amount of incompetence
They do their best with the materials they are given.
And this is India, the words "efficiency" and "safety" are not part of their vocabulary.
IT TOOK A LONG TIME TO FREE UP JUST A QUARTER OF THE HOLE...IT'S INCREDIBLE HOW SUCH A BIG COMPANY DOESN'T HAVE A FLAT AND WIDE AND MUCH LONGER TIP MADE BY HITACHI THEY WOULD BE ABLE TO DO SO MUCH WORK IN HALF THE TIME THAT WASTE OF RESOURCES
This would overwhelm the following conveyors, hoppers, sieves, and crushers. As a high flow of fines would just slip down unstopped by the first crusher, because the most of the embeeded bolders would be crushed by one or two hits of the hanging cone. Not an engeneer, but common sense.
Чем больше я смотрю тем больше мне хочется сказать что эти работники сознательно и всячески затягивают процесс , специально посмотрел ещё несколько роликов и в этом убедился , вот что проще начать снизу и освободив участок помочь массе самой под собственным весом свалиться вниз но нет он упорно делает сверху вниз , я не знаю это просто нереальная тупизна либо способ показать кому-то свою значимость
THAT is the shortest 'Long Reach' arm I have ever seen, also a bucket would have been a lot quicker.
Longer arm with scrapper no teeth
How a company like this can still make money is totally beyond my comprehension! Tip 1: put a grapple on the crane that removes boulders from the crusher mouth, this will save at least 2-3 hours of crusher downtime on a 8 hour shift with many boulders! Tip 2: next time using the Hitachi digger to clear dirt as shown; ditch the hammer and put on a toothless 5 or 6 foot wide sandbucket, it will get the job done in 20% of the time showef in this clip! It looks like wasting time and money is the major goal for this company: terrible!
"Tip 1: put a grapple on the crane that removes boulders from the crusher mouth,"
Those boulders are 5-10 tons. Good luck with that grabber.
" Tip 2: next time using the Hitachi digger to clear dirt as shown; ditch the hammer and put on a toothless 5 or 6 foot wide sandbucket"
You mean like they do in *EVERY* other cleanup video? Just because they did not have a bucket at hand this time doesn't mean they always do it like this.
"It looks like wasting time and money is the major goal for this company: terrible!"
It's in India, there is no concept of efficiencey or speed, or safety, or environment.
Don't project your "I need to get it done in five minutes or the boss will fire me" mentality on a different culture.
Well said ,Sir! The "advisor" (lol) is probably nothing than an "arm chair operator" who hasn't spent a day working in high heat with oppressive humidity.
It's tata they are hemorrhaging money
They use that attachment beause they'd need a long reach excavator to do it as you say. It's a bad design by the crusher builders, not these workers.
@@couchtripper agreed.
Right you have a new machine, Now get some one trained to use it correctly.
I’m surprised you don’t have a long reach excavator with a root rake attachment, could have cleaned that pit out in about 5 minutes compared to this disaster of a performance shown here
You could get away with a tilt system there is so little pressure on the machine.
Boss has no brained
Ya know…. A BUCKET would’ve made more sense. 🙈😂
There's a video of them using a bucket. They didn't do any better!!😅
Surely if there is that much built up on hopper walls requiring that amount of time to clean a small portion of it then surely the hopper is the wrong shape to be fit for purpose
Must have been paid by the hour. The material was soft enough to use a 2' smooth bucket.
That size machine can handle a 10 foot ditch bucket for situations like this and a 4 or 5 foot toothed bucket for actual excavation work.
Wrong combination of job and equipment - A lot of time used (and thereby also a lot of money wasted).....
Shhhhhhhh, im so happy the algo is bringing me back to this circus
😂 should have use the hammer shovel instead of hammer pin
That was painful to watch .....
@@williambabich9761 That would also have been possible with 20 workers and a spade, like in the 18th or 19th century🤣🤣🤣🤣🤣
All you need to do is put your hose nozzle on high mist for dust control, not soaking the crap out of your dumps. Too much water application will cause your crusher funnel crown to cake up, like what been happening here. Put a sift bucket on that boom, and a good operator that knows the funnel crown setup to do job quicker than the time wasters you got.
Lol you caught the white skirt man taking a leek as the new toy drives away.
One makes beep, beep, beep! The other spch, spch, spch! Because he thougt anybody would be distracted by the face and ears washing.
I knew the 4K resolution setting would come in useful some day!
Wouldn't a few cycles of that hammer vibrate most of that stuff loose?
If the operator positioned the tracks sideways he'd have a better view of what he was doing. Also needed a spoon about a foot wide. Definitely start at the bottom so the material can fall away.
Start at the bottom and go side ways. Not at the top and go up n down 🤔👎🏻
Yes, start at the bottom and risk an avalanche that pulls the digger in with it. Good call.
@@vinny142 The "avalanche" ist the best result you could reach !! Do you really think that moving sand
will pull this excavator into the crusher ???? 😂
My thoughts !!! Do it this way and gravity is your friend.
@@vinny142 The digger is sat on the other side of a wall. Nothing, literally nothing, that happens in the feeder, could pull the digger in...
Go side to side to cut a ledge
NO frigging idea mind boggling.
Always tricky, these extra maritals…..
Не занимайтесь хуйнёй, а пригоните экскаватор с планировочным ковшом и за полчаса он всё очистит.
How about getting a rotary attachment similar to forestry mulchers and put on a plastic brush. Start it up at bottom, clear to metal, pull up slowly until you get tp top. Move over and repeat. Also, try using those LONG excavator booms that can reach the other side...
A foot or so increasing the angle of the infeed angle would sure help stop this buildup. A poor infeed could be solved when it was installed. The opperator can use a lot of lessons on how to clear the buildup bt sweeping from Left to Right starting at the bottom.
Техника Хитачи решает все задачи 😊😊😊
Why do the job at all if you are not going to at least remove 50+% of the material. Was he on a clock or told to stop and go to another location.
So Sad
Schade das man an den Bagger keine flache breite Schaufel anbringen kann . Schneeschieber Zeit ist Geld It's a shame that you can't attach a flat, wide shovel to the excavator. Snow shovel Time is money
Ich weis auch nicht, die machen es sich wirklich schwerer als nötig, allein schon wenn ich sehe wie sie die verklemmte steine mit dem "Angelhacken" lösen. Junge Junge, was soll das? Da gehört sowas wie nen Greifer, wie man zb. auf eienem Schrottplatz benutzt, hin. Würde bestimmt schneller und besser funktionieren. Aber zum saubermachen würde eher ein Bagger oder ähnliches Gerät mit längeren ausleger und breiterer Schaufel ausprobieren. Und warum machen die nur halbe sachen, wenn schon dabei mal richtig säubern und nicht nach der hälfte aufhören. Versteh das nicht...
@@farmerkampi3583 Genau , man könnte z.B. ein Rohr an diesen Haken so anschweißen um ihn dann über Seile zu führen und mal eine Schippe zur Hand oder eine Spitze vorn am Haken oder über Erschütterung (Großer Hammer) das Erz lösen . Bei der Reinigung ganz unten anfangen links rechts hin und her . Machen wir eine Onlineberatung 🤔😅
@@farmerkampi3583 Wenn ich das sehe klappen mir die Zehennägel nach oben.Kann ich nicht nachvollziehen wie man solche Stümper in so einem großen Minenbetrieb beschäftigen kann.Die haben vieleicht auch Fachkräftemangel.😂😂😂😂😂
@@kurzschnautzert180 Ganz sicher, dort arbeiten, bis auf die jeweiligen Chefs nur Angelernte. Berufsausbildung, wie wir sie kennen, gibt es außerhalb von Europa kaum irgendwo auf der Welt. Learning by doing ist viel billiger und läßt die Leute unten. Wer was werden will geht studieren...
How about something simple like a fire hose?@@farmerkampi3583
at least start at the bottom and work your way up. that's management for ya
A root rake attachment would speed up the process. Always something to slow down the work. Industrial settings are my idea of fun.
Glad I'm not the only one who watched this thinking what a waste of time. He probably put four times more hours on that equipment than needed.
If all you have is a toothpick, you still start at the bottom and work your way up.
How about investing in some pneumatic or hydraulic hopper vibrators? Then you wouldn't be dealing with all this buildup. In the meantime, tell your excavator operator to start and the bottom and then work up...
"How about investing in some pneumatic or hydraulic hopper vibrators?"
A) They need that buildup to protect the hopper from the 100Tons of rocks that each truck dumps into it.
B) Each truck dumps 100tons of material, and you think you can just shake that hopper hard enough to dislodge material?
C) If you start at the bottom and 200tons of ore buildup starts to slide down, your digger is going with it.
You might think a bucket is alot better then a 'pin' of metal. But maybe I am wrong 😂
They should use some kind of small dozer blade to push and pull the material into the hopper.
Maybe park the excavator sideways You will see further in the hopper
That's like clearing snow with an ice pick.
So are you going to give me a plan of action?
No, we are just going to shout until we see something we like!
The only thing “amazing“ about this is the complete misuse of equipment to do a simple task. Who thought it was a good idea to clear a 30 foot wall of dirt with a 6 inch wide hammer attachment?
Ahhh that thing will vibrate. Use the ugga dugga bud. But bucket would have been better
Realmente yo esperaba este maravilloso momento. Esta herramienta también sirve para desbloquear la entrada cuando se obstruye, y también para quebrar las rocas que por grandes no caben por la entrada de la trituradora de cono y así no se tienen que poner en la peligrosa labor de sacarlas con la grúa del techo. Felicitaciones.
our company had a hyd hammer installed on out hopper was great
Where this company.. Which country...
А не проще ковшом это делать ?????
Why not put u bucket on the 360?
I don't see anything "amazing" about a breaker being used instead of a bucket. Come on.
Replace the hydraulic breaker with a 36 inch bucket and just push with the back of the bucket ..
Like they do in every other of their cleanup videos?
Does that guys in the white shirt 👕 hopefully he knows that all can him taking a piss on camera
U stupid 😅
but the bucket without teeth back on. it would be much better for that job
I would start at bottom and moved side to side
Wrong spec machine! Should have longer dipper arm and wider grading bucket.
should have made the point into a spade end..more coverage and pressure spaced out then , and no damage to the sides !!!
Personally I'd have a long reach excavator with 60 ft of boom and a smooth edge ditch buck on it, start at the bottom and work my way up, second of all I would mount vibrators under the back side of that hopper to help with the removal of all that build up, too much down time.
An Englishman would have invented a solution and would be in his shed building it by the time the vid ends
Why not use a wide bucket? Would work much better.
It looks very soft
I was getting annoyed at the driver for coming out and looking all the time. He should know what he is supposed to do.
That wait of 20 min for sure . 😮
Loving the keyboard operators on here…. blah blah blah
Cool video
If they call that a long reach,hate to see others like 60feet reach
Wrong tool for this job!
A) what makes you think they don't know that?"
B) if this is all they had available then it was the correct tool"
I had high hopes that you changed the stupid crane to that…!
O lol they dont have a buket?
That tool spends more time floating around in the air than it does IN the dirt🙄
It's what they have Better than the hook
Who came up with this idea? Tool completely inefficient, plus operator seems confused. A large bucket/fork would have that job done in an hour. Very poor management skills.
Is it me or is this operator clueless on what he is supposed to be doing?
Government owned and run company
paid by the hour
Why not use a high powered water jet or since you got a digger put a shovel on it or a bucket
😮ковш надо было прогонять а не эту хрень
Tata i wszystko jasne
Use a 3 meter flat metal plate to move that sand 10 times faster
🤦🏻♂️
Sometimes i think this people get problems to think
Now the admin is gonna give me a like because he dont understand..
Totally the wrong thing for the job, a flat shovel / rake type end would be quicker.
真面目に仕事お、お願いします!
プロなので、現場を見れば!どの様な仕事をすれば解かるはずです!!
Long arm ,rotator , bucket .
And what's the result ,? ? ?😮
а если бы это делал экскаватор....))
Next time just for fun tell operator to stay in cab and drive machine and start at the bottom not the top and see how that works next time I seen hens do more damage than that operator
Haha they haven’t got a clue they are so backward
So, the crusher hopper was cheating on its partner?????
germany: You can't look there, you seem to have too much money????????🤑🤑🤑🤑🤣🤣🤣🤣
I'd like to see this chisel point to break up large boulders instead of that j-hook
amen!
Put on a grading bucket ffs 🤦♀️
You would think they could afford to buy a bucket with teeth
They don't seem very competent to me
I'm absolutely amazed and appalled at the ethnocentric attitudes displayed by the vast majority of the comments. They show no regard for the cultural differences between the (obviously) western commentors and the Asian culture embodied in India. While there is some inefficiency in the methods used, the workers aren't just sitting around bemoaning the lack of "proper" equipment; they're just getting the job done with the tools they have. In a way, it kind of reminds me of what the American pioneers did - they used what they had and got the job done. It also calls to mind an old saying, "If you can't say something nice about someone, don't say anything at all."
Absolutely agree with this , it’s easy to judge this by what you see .
Se quita primero lo de abajo.
The very first bit of common sence I have seen
👍
Extra marital, lol.
Mit intelligenz und Logik bei der Arbeit hat man es bei euch auch nicht so was.
Ca n'est pas l'outil adapté pour ce travail de récurage... Décidément, le responsable ferait mieux d'aller vendre des frittes...
To slow
Mais pourquoi il ne change pas Pour prendre Un Godet pour poussée la terre
Il faut apprendre votre métier
Молотом????? Вы серьёзно ахахххаха. Экскаватора в такой организации нет ????
p.s. видимо там почасовая оплата, всё медленно и без инициативно.
That driver is brain dead
Бестолково-бесполезная работа. Рука у него короткая и насадка негодная для этого дела.
This place can't do anything right, from this to how they remove stuck rocks.
Thank you, Chuck. But this is not the fastest or the best way to do this job. Even a little boy and his Tonka truck could do a better job. Hell, give me a straight edge shovel and safety rope setup!!
Bastava una benna e funiva subito.... Frustrante vederelo usato così
オペレーターは技術が少し足りない様です😅