Здравствуйте, Мастер! как всегда успехов! Вы очень стараетесь и делаете полезные вещи! Нет пределов совершенству) И кстати) не забывайте про испольованные электроды)
Shurap is a real bladesmith. Probably one of my favorites on youtube, and he actually makes knives that would bring a lot of money. This guy does novice work. I respect the effort, but that's about it. He could literally change his whole game if he got a belt sander. That's what 95% of actually bladesmiths use to refine their work. NOT AN ANGLE GRINDER, especially with a 5+ inch disc.
Taki nożyk bardzo mi się podoba. Nie za duży. W sam raz do codziennego użytku. Proszę dbać o wzrok bo to nic przyjemnego jak wyskrobują z oka opiłek albo kawałek zgorzeliny. Pozdrawiam. 😁👍👍👍👍
Glad I found you again! Last I seen you were on a different channel till I stopped seeing you on there and it was someone else. Great video and amazing knife as always!!!
Sir, you got a really nice pattern on that blade! Do you not worry about the epoxy loosening up if the blade were to get heated up? Should you not use a mechanical method like a pin or something?
I know that the cutting teeth are a different metal than the main part of the chain. Any idea what the metal is? I think it might be M42 high speed steel, but not positive. That could change from one maker to another...
Ну пойдёт на уровне гаража. А где отпуск после закалки? Почему клинок один раз сплющил и всё? Дамаск это не то. Ручка супер дешёвая. Купите гриндер. В общем молодец,на уровне гаражного самоделкина.
There is a new trend sweeping across TH-cam, people not saying a word at all while making something on video . This guy has seen other videos on TH-cam where whoever was making something without saying a word so he decided to jump on board the bandwagon and do the exact same thing.
It's not a new trend it's been around for years. it's called ASMR (autonomous sensory meridian response) videos. It's supposed to be relaxing, that's why there's no talking.
The end product looks nothing like the thumbnail. I'm not really surprised someone would mislead everyone on youtube. I'm starting to think not having integrity is a requirement to post videos.
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
OG for sure. Massive power hammer and a grinder to match. Impressive.
Gran trabajo🎉
Ese martillo mecanico debe tener mas de 80 años....y aun esta oerfecto🎉🎉🎉
Sadık Usta, tuttuğunu bıçağa çeviriyorsun. Helal olsun sana gardaş..
This man's safety squint is next level.
I thought that! 😂
Next level safety squint!
Браво мастеру, молодец,просто и со вкусом.👍👍👍🔥🔥🔥
вообще глядя на Вас хочется разогреть железяку и попробовать что-то сделать)
Put it up your @$$
Beautiful work indeed !
Thank you !
Thank you too!
Very beautiful and simple and practical 👍🏻❤
Thank you! Cheers!
Safety First 👍
Здравствуйте, Мастер! как всегда успехов! Вы очень стараетесь и делаете полезные вещи! Нет пределов совершенству) И кстати) не забывайте про испольованные электроды)
я когда Вас смотрю всегда переживаю.. ну очки хотя бы...
Missed seeing you. Glad you're safe. Hello from America 😊
🤗🤗🤗
EXCELLENT JOB MASTER!!!!!!!!!! GREETINGS FROM URUGUAY
Thank you very much!
You do good work. Texas
Thanks 👍
You are a boss and I love a clean shop I've never complain because it's not my shop
Quality craftmanship.👍🏼
Excelente trabajo !!!! Saludos desde Apodaca Nuevo Leon Mexico.
That knife has character. I like it. Good job dude
That’s a really short knife
I was thinking would be more bigger
Nice work. Your video quality is top notch!
Beautiful work. I really appreciate your craftsmanship. What's that white powder you sprinkle on the metal?
Borax
Integrity Built to Last ⚔️🔪
One of the most beautiful work here on TH-cam knives forging channels. Pure hard work and great skills. I respect you for this.
I do like it when ya take a break with some tea sometime in the video. Ya should do that again and more often
Men hoch abgeschaut bei wilderness cocking
Sorry Daumen hoch
Tee trinken abgeschaut bei shurap
Shurap is a real bladesmith. Probably one of my favorites on youtube, and he actually makes knives that would bring a lot of money. This guy does novice work. I respect the effort, but that's about it. He could literally change his whole game if he got a belt sander. That's what 95% of actually bladesmiths use to refine their work. NOT AN ANGLE GRINDER, especially with a 5+ inch disc.
Əla iş bacarırsınız,allah ruzinizi bol eyləsin.
super boulot comme toujours
Taki nożyk bardzo mi się podoba. Nie za duży. W sam raz do codziennego użytku. Proszę dbać o wzrok bo to nic przyjemnego jak wyskrobują z oka opiłek albo kawałek zgorzeliny. Pozdrawiam. 😁👍👍👍👍
Uma jóia.
Parabéns, sucesso e bons trabalhos!
Curta a vida pois ela é CURTA!
из "Цепнопильной" стали!
Окалину можно поймать в глаз, когда пилишь без очков.
Glad I found you again! Last I seen you were on a different channel till I stopped seeing you on there and it was someone else.
Great video and amazing knife as always!!!
🙏🙏🙏❤️😊
Muito bom! Por mais vídeos assim!
This man is a genuine master craftsman. Amazing!
🤝🤝🤝🙏
Mastera надо поддержать лайками
за что? тяп-ляп ножик, тяп-ляп рукоять...некрасивый дамаск...
@@NikoN565 век живи- век учись! с каждым разом будет лучше)
@@tehexp я ножи не делаю. Но тема интересная. Тяп-ляп это про мастера в видео ролике.
Amo ese cuchillo. Por favor, usa gafas protectoras pues cuando te vemos trabajar sufrimos por tus ojos cuando no las llevas puestas.
Sir, you got a really nice pattern on that blade! Do you not worry about the epoxy loosening up if the blade were to get heated up? Should you not use a mechanical method like a pin or something?
The cool thing is he never waist a drill bit just turns it into another knife lol
You sure get a lot of use out of that big motor/shaft/arbor setup (although the pucker factor is high when you have a wood-cutting sawblade on it).
Wow🎉
Great job. Nice combination of wood and chain ! But what the heck.... another knife I wanna have....😢😂❤
Скажите сколь стоит заказать в Беларусь нож кухонный?
Прям так из бензопилы?
Bonsoir super couteaux
Saya suka yang sederhana
Master Super 👍👍👍
Sadık abi bir tanede kılıç yapsana bize hep bıçak yapıyorsun
Гриндер отдыхает , респект
Видать пила произведена в Дамаске, но это не точно.🤪🤪🤪
You really need a makers stamp fror your projects, friend.
Hello, nice project. But please use safety glasses or a face shield. You dont want your next project to be your last. Nice workshop as well.👍👍
Seyran qardaş salam. Həmişəki kimi super alınıb. Ancaq çalışın eynəksiz işləməyin. (глаза и зрение это один из милостей Аллаха)
Good 👍
Thanks
сколько ручной работы
Sem óculos, sem máscara, tipo raiz mesmo! Pulmão cheio de pô de ferro e olho cheio de cisco
I know that the cutting teeth are a different metal than the main part of the chain. Any idea what the metal is? I think it might be M42 high speed steel, but not positive. That could change from one maker to another...
Qu'est ce que la poudre blanche et qu'elle est son rôle dans le debut de chauffe ? Merci est vidéo incroyables
А то я купил нож из дамасской стали и он оказался не из дамасска
wwhats the white powder ya keep putting on it
Very nice, but wear some safety glasses
What is the white stuff you're sprinkling on the steel? I'm so curious about that.
It's Borax, it's a flux to keep oxygen and other impurities out of the welds
Que dolor de espalda chico! Ponte a la altura el banco que estas muy doblado currando por dios.
а Вы сами снимаете или есть оператор?
Ma cos'è quella polvera bianca
Como o povo é chato com essa história de óculos
What is the white powder?
техника безопасности мягко говоря хромает, небезопасно для глаз и для рук. Страшно представить , что будет если лопнет отрезной диск. Поберегите себя.
Парень заслуживает внимания и уважения, его можно смело посылать за смертью, будешь жить долго.
Ну пойдёт на уровне гаража. А где отпуск после закалки? Почему клинок один раз сплющил и всё? Дамаск это не то. Ручка супер дешёвая. Купите гриндер. В общем молодец,на уровне гаражного самоделкина.
Made from an old chainsaw CHAIN.
3 !
Nice work. You should wear eye protection. whenever I worked in any shop, I wore eye protection.
kaşık ile üzerine döktüğünüzün ne olduğunu öğrenebilirmiyim?
Its most likely borax. Its a flux to remove slag and help with the forge weld bond it also helps prevent oxidation.
Никто никогда не проковывает спуск. Кроме японцев.
Why's that welding rod so long haha
Very nice knife! Have they heard of eye protection on your planet though???
Bez okularów bo pewnie nie zna bólu wyciągania opiłków metalu z oka, mi wyciągali raz i nigdy więcej.
There is a new trend sweeping across TH-cam, people not saying a word at all while making something on video . This guy has seen other videos on TH-cam where whoever was making something without saying a word so he decided to jump on board the bandwagon and do the exact same thing.
It's not a new trend it's been around for years. it's called ASMR (autonomous sensory meridian response) videos. It's supposed to be relaxing, that's why there's no talking.
Are you a friend of Shurap from Ukraine? Nice work
What is that white stuff he keeps putting on, is it a hardener?
borax
Что за порошок вы насыпаете на горячую заготовку ?
Это называется бура
God gave you 2 eyes but only having 1 sucks. Safety glasses dude.
А где дамаск то?
Un genio
оператор канешн
Мастер сразу видно интересно какова цена будет если купить
Where are your safety glasses?
He doesn’t need safety glasses. He’s a beast mode alpha male.
He’s top tier master of blades lol his eyes are marble steel lol 😅💪🏽😎✌🏽
@@megagreatgodlywhiteshark2929❤❤❤
Who cares!? That's his risk to take. It shouldn't concern anyone
Let's be honest ... it's shit.
Здравствуйте почему не ставите своё клеймо?
Два глаза роскошь. Правильно, хороший мастер и без глаз может нож сделать. 😂😂😂
What is that white Pawder?
It’s a borax
When the moon hits your eye like a big pizza pie, it's a borax
Plz protect your ears, eyes and lungs 🙏
Нож весь в глубочайших кавернах и наслоениях, нифига не сварены слои а на 17:55 вообще дыра видна в поковке. Зря металл перевёл!
👍👍👍🇩🇪
Так себе. Ничего красивого
The end product looks nothing like the thumbnail. I'm not really surprised someone would mislead everyone on youtube. I'm starting to think not having integrity is a requirement to post videos.
грубовато
I like this guy. But he talks too much.😂
Sa doit pas être facile a travailler
You really need to wear eye protection, I know I've commented on alot of your other videos about eye protection
@moondog4313 Then stop preaching about it.
If I told you to diet and exercise to reduce your risk of heart attack, would you listen?
How do you pay the bills when you take all day to make a knife that looks like it’s worth $20 maybe
Lol he's probably capable of making money with the skills he has. This is a project for a video
I do understand what you're doing.But what is the principle of the white powder that you are sprinkling on