Great and easy to understand your automated presentation. Question?? My 67 Mustang uses dual 10" fans. I need to toggle switch them so both come on. Can I run a jumper from both #85 terminals connecting them and then one wire from one of the #85 terminals to the toggle switch? Thanks very much for your time and sharing this information with us. Blessings from Motown.
one question and thanks for your time, I am rebuilding an old car that the A/C compressor is a clutch and works at 12v and ground, I want to put two fans in the car with the following configuration one of the fans that always turns on when the A/C is on and another one that turns on when the ecu orders it by temperature, here comes the question how can I make the two fans turn on with the ECU even though the A/C is not on?
Thank you for your excellent presentation. I have a 2005 Mazda MPV ES. The radiator cooling fan it's a dual fan system. One of the fan not working, the other it is OK. The fan that doesn't working has 4 wires. How to test that fan with 4 wires to make sure it's bad?
So I’m hooking dual fans up to my LS swap and I have two wires coming off my standalone harness for fan one I found two green and blue which one would I hook it up to ?
so... what do I do if the wires to the coolant temp sensor turn the fans on when they get ground, then when they get power. only for about a second at a time?
On my wife's 07 edge sel with tow package. The engine has dual radiator fans. Immnit sure which one is for what besides cooling purposes. The issue is one of the two fans is not working at all. They both once were working. I attempted to switch out the control module. Thinking it was the problem. Result fan still not working. Just one fan only does work as it should. My questions to you are : how can I use this specific method in my attempt at fixing the non running fan in suv ? And would it be possible in using your given method with or without need of having a toggle switch ? I'm not sure I know how to tie into the vehicles existing set up in order to get that fan back working again. Thank you.
You DID not specify if terminal 86 is necessary to use. If you don’t use terminal 86 and leave it empty wouldn’t that mean that the fans WOULD run without the key in the vehicle and just rely on the toggle switch to ground? Thanks.
can this (12v or 24v) fan be powered by a power adapter like 5amp powerbrick? would it even spin? how loud would it be and how many rpms would it spin? thanks for your estimated knowledge.
I believe that is the ground prong. It looks like a switch symbol next to it, I guess but should show as a ground. I see the fans have the same symbol also and they don't have a switch on them. Different manufacturers us different symbols and I am not 100% sure of them.
Thank you been looking for confirmation on using toggle switch on 85 ground.
Thanks you answered my question with your diagram!! Much appreciated. As my instructions were poor
Nicely done. straight to the point !
Very nice presentation, talented professionals technicians.
super easy & simple way of explaining things, Great job!
Great and easy to understand your automated presentation. Question?? My 67 Mustang uses dual 10" fans. I need to toggle switch them so both come on. Can I run a jumper from both #85 terminals connecting them and then one wire from one of the #85 terminals to the toggle switch? Thanks very much for your time and sharing this information with us. Blessings from Motown.
I needed this. It's simple and will allow me to do my own wiring.
Thank you very much mate you explained this so bloody perfect and easy! Genius
Thank you sir, I needed that. Very informative.
outstanding explanation
one question and thanks for your time, I am rebuilding an old car that the A/C compressor is a clutch and works at 12v and ground, I want to put two fans in the car with the following configuration one of the fans that always turns on when the A/C is on and another one that turns on when the ecu orders it by temperature, here comes the question how can I make the two fans turn on with the ECU even though the A/C is not on?
Plz reply this question. Thanks you.
Thanks. This made it simple to follow along
Alright, thank you so much!!!
Thank you for your excellent presentation. I have a 2005 Mazda MPV ES. The radiator cooling fan it's a dual fan system. One of the fan not working, the other it is OK. The fan that doesn't working has 4 wires. How to test that fan with 4 wires to make sure it's bad?
So I’m hooking dual fans up to my LS swap and I have two wires coming off my standalone harness for fan one I found two green and blue which one would I hook it up to ?
so... what do I do if the wires to the coolant temp sensor turn the fans on when they get ground, then when they get power. only for about a second at a time?
Hi great video.....can you add a light so you can tell if the fan is on or off in the cab of the vehicle?
It looks like keyed ignition switch hookup is under dash to any keyed on wire source.
When using ur updated harnesses, for 86 do I use the orange electric fan wire ?
thanks I have a suburban and I want the tow fand works on high speed all time how the diagram will be thanks .
Very well done thanks..
Is there 2 wires or one wire on thermostat??? mine is two wire, can I follow the same installation??
Mine One 🙃
Can I substitute a Fan for an electric water pump to turn ON with the single fan ??
Can terminal 86 be connected to the post that goes to the starter motor?
On my wife's 07 edge sel with tow package. The engine has dual radiator fans. Immnit sure which one is for what besides cooling purposes. The issue is one of the two fans is not working at all. They both once were working. I attempted to switch out the control module. Thinking it was the problem. Result fan still not working. Just one fan only does work as it should. My questions to you are : how can I use this specific method in my attempt at fixing the non running fan in suv ? And would it be possible in using your given method with or without need of having a toggle switch ? I'm not sure I know how to tie into the vehicles existing set up in order to get that fan back working again. Thank you.
My fans are working when you switch it on but not working automatically when reaching the normal operating temperature?
How do two radiator fans work?
Do both turn off simultaneously or one after the other?
You DID not specify if terminal 86 is necessary to use. If you don’t use terminal 86 and leave it empty wouldn’t that mean that the fans WOULD run without the key in the vehicle and just rely on the toggle switch to ground? Thanks.
can this (12v or 24v) fan be powered by a power adapter like 5amp powerbrick? would it even spin? how loud would it be and how many rpms would it spin? thanks for your estimated knowledge.
Hi! Great jod! What program for create video animation
What is 190.4 mean ?
Is it 190.4 degree ?
What is sensor ?
Awesome
Installed one on my 95 F body Camaro no check engine light comes on put the original sensors not in it how to fix that
can I use toggle switch without relay ?
You can if you know how to wire it up correctly
Fantastic video! Thank you! I will follow your IG
Great Video🔥
hello question after i wire the first prong on the toggle switch what goes to the second prong, if anyone can answer this id appreciate it
I believe that is the ground prong. It looks like a switch symbol next to it, I guess but should show as a ground. I see the fans have the same symbol also and they don't have a switch on them. Different manufacturers us different symbols and I am not 100% sure of them.
What is relay 40A or 80A tanks
None.
If this method works on a two-speed fan, does it work at any speed?
Its two fans, not two speed fans you muppet.
@@SOLDOZER haa
Excelente 👌
Very nice
So basically when it reaches the temp of the switch you need, it will
Cut on
How on a Ls1 engine
Waw so cool❤
👍👍👏👏👏
Thanx
Hay de hieu. Thanks in
Tnx sir
Than's
❤
Good
😍😍
PERFECT 👍🏼👍🏼👍🏼👍🏼🍑🇺🇸
Sir explain in Hindi please