P B Plumber Pipe bending tutorial
ฝัง
- เผยแพร่เมื่อ 10 ก.พ. 2025
- Hopefully this video will help some of you who aren’t confident with pipe bending, its my very basic method explained.
If you like my videos and want to help me make more, you can Join my channel here 👇🏼
/ @pbplumber
For an apprentice, videos like these are absolutely brilliant!! Thanks so much for the time and effort you clearly put into each video. Keep ‘em coming!! 👊🏼
This is a superb example of consistency when bending. Using a spring will give you a slightly different shaped bend every time, and compared to this would look like a dogs dinner. For any apprentice watching, learn this, or any other methods out there ( and I use a different method to this, but still get the same accurate results ) and stick with it. Speed will come with time and soon you’ll be bending pipes quicker than someone using elbows and soldering them.
The advantages of bending pipes are -
* it’s neater
* it won’t leak
* lower flow resistance, leading to longer pump lifespan
* no hot works permit if you’re on site
Very neat job you did there, I bet the customer was thrilled with the installation when you finished.
This video is class. Some top tips for an apprentice like myself! Using the off cuts to get a mm accurate measurement. And taking note of inside/outside/centre marks
, and how to copy that onto the bender itself is a trick I will be adding! Thanks 🙏🏼
glad you found it useful mate
Some idiots giving this a thumbs down. Great videos deserve a thumbs up
This one got a thumbs down within a minute of it uploading.
Pretty sure I know who it is, sad really there’s room on TH-cam for everyone 🤷🏼♂️
@@PBPlumber sad people. Keep up the great work.
Il break those thumbs down to turn up man 😀👍🏼👍🏼👍🏼
@@PBPlumber plumberparts by any chance?
Quality vid mate! Great to see you taking so much pride in your work, not enough of that these days 👍🏼
thank you mate, very kind
We run a small plumbing and heating company just outside of London, had a guy in for an interview that suggested bending copper tube is a 'thing of the past' and could do it all in soldered fittings just as well. Mentioned he refused to carry tube benders on his van, as it was a waste of space.........Forgotten his name already, as he didn't get the job.
It's nice to see it done properly.
Pulling beautiful bends there m8, love the old man grunts when you get up after kneeling, ive started doing them myself..
I’m doing that at 23 lol
Be the bum crack hanging out next 😁
Quality mate 👍
As a sparky struggling with conduit bends and sets I can appreciate the skill level!
Tight work, and great demonstration. Bending over elbows any day! I was taught to always use the longest stretch of pipe you can ie. preferrably a single piece between junctions and endpoints. Bends are not only cheaper than elbows, cleaner than soldering, more leakproof than any fitting, the better flow also means less turbulence so less noise and better pressure.
Thank you for a brilliant guide to bending as an apprentice this rely is the best way I have seen to pull bends, this will be put into practice on Monday thank you 👍
glad you found it helpful David, let me know how you get on
This is a fine art, very satisfying to see the copper all bent and hung up !
Watched quite a few bending yt clips. This one is by far the best in explaining how to measure some compound bends. Excellent.
Great video mate! All the way from Australia 👊🏻
I just have to say ypu are doing amazing work and I haven't even watched the whole video.
I'm not a plumber but an electrician and the way you explained your method of bending works excellent woth emt conduit too! Thanks alot! You just saved me alpt of pain and headache
Best pipe bending tutorial on youtube....
Mate this is so much easier than what my lecturer at college taught us... Nice on Pete 💪🏽👍🏻
Definetly good at pipe bending, On commercials we were always given fittings to use as a mitre is easier for foil lagging but not many bend much 28mm
Great video. I'm D I Y, I was having problems with multiple bends, that's helped me alot. Thanks.
From Australia and it’s good to see your wearing steel blues. I love my pair.
Top quality pipe bending...well done mate!!
Love this video and explanation....thank you for taking the time to do these videos, they are greatly appreciated 👍🏻 looking forward to the next!
Thank you so much for the video! my work is much more improved after this, and I am making less off cuts
Watched this video and subbed straight after the video ended. Great work.
thank you mate I appreciate it
You're a natural bender.
Lovely work btw
Good bit of inspiration PB have swapped out my old Rothenburg for a Nerrad and cutting down on the press fittings
Thanks 👍
hoping to inspire more people to bend more
@@PBPlumber And I’ve been in the trade for 42 years from apprentice to business owner got to keep trying to improve
@@PBPlumber I am inspired already, I'm a plumber in LA, I like to work clean but your job is awesome!!
By the way, what brand is your bender?
I can't find a good one yet.
Thank you for the tutorial 🫡
Thank you very much for these clearly explained step by step video - I am just starting out re career change (age 35) and unfortunately doing these fast track courses re gas engineer they don’t teach you much especially “pipe skills” it’s all rushed - I would appreciate if you can put some more real life connecting to boiler pipe skills videos :) thank you very much for your kindness!! Will be watching a lot of your videos now here knowledge is power!
That looks so sick
That was a very worth while video to watch..
A nice tidy job too!!
PB the best bender in the business 👏👏top tradesman
Just 3 minuts past to deserve my lyke button and new subscriber! Congratulations!!!!
You would definitely make a good plumbing teacher at a college
thanks mate, it’s definitely something I’m interested in the future
@@PBPlumber I’ve just started in a college 3 weeks ago after spending 40 years on the tools, feels bit strange at the moment but I’ve got 2 weeks off for Easter, which is a big plus, and I won’t be press ganged into working over Christmas either.
@@PBPlumber don't do it!
Your work is on another level and your tutorials are absolutely bang on
Awesome video! I’m going to try this out tomorrow with my new Rigid bender
Great video, so informative and delivered in layman’s terms. 👏
Nice bending. I love it when it slides into place easily
no better feeling when the pipe docks into the clips
This has helped me loads as an apprentice
Nice work pb. I always try to bend my pipework where possible and time depending. Don't really see many people bending now which is a shame. Haven't been in the trade that long myself but have taught myself to bend copper to a decent ish standard! Love the videos by the way thanks
Cheers mate. This helped me do a centre to centre two 90s across a room in a channel. Never really done much like this before. Did it first time. Cheers mate
Thanks for taking the time to make this video. It helped me a lot.
why American plumbing is all about fittings .impressive
Right on, a plumber in US, great content brother!
I think PB plumber means pipe bending plumber. That’s very impressive 👍
cheers Jimmy Lad
Excellent tutorial, great skills. Thanks so much.
Just wondering if laying underfloor is taught differently in England.I have been in the industry for some forty years mostly working in Scandinavia,the Netherlands,Germany and the middle east on industrial contracts.Dont you lay the pipe allowing for the returning pipe from each circuit to loop alongside the flow so that you dont have as much of a temperature difference and making the overall layout more efficient rather than losing temperature further away from the manifold.Simply staggering the loop to allow for a returning loop is how i was taught.Keep up the good work.
What a bender, I use a square or steel rule instead of an off cut of pipe as it doesn’t roll about, nice work
Glad to see you have knee pads in. Great work as usual.
yeah when I have trousers on I wear them with knee pads, I’m a fucker for not wearing them when it’s warm and I’m in shorts tho
Superb tutorial Pete - so helpful thank you!
On that gas where it’s a T are those press fit fittings where you put that crimp gun thing on it and it squeeze the pipe so no soldering is needed ?
Your a credit to the industry, another quality piece of work and great tutorial.
Fantastic as usual, a work of art,thanks pb.
Whats the best way to practice complex bends whilst being a student ?, would you suggest buying a bundle of copper and trying or is there a more economical way to do this, please reply me, love the videos I aspire to be as good as this 😊
First off, excellent video!! Are you using special pipe that is designed for bending?
Excellent work! Well done Mate.
I was a Gas Engineer/Plumber for about 14 years a house basher. I must have spent thousands on fitting because I could just not grasp pipe bending, I even paid for private tuition 🤯🤯🤯
That's the best bending vid I've seen hands down on internet ,real world stuff and a great Learner for the newbies and the guys that can't see past the elbow fittings.it also makes for easy lagging without having to mitre.and lastly do you not think them motorised valves are pants compared to Drayton and Honeywell it got to the stage we stopped using them ,cheapo microswitches
They are Drayton valves I think looking at them you mean the strom valves and yes you are right worst part ever never had one last more than 6 months apparently the rep told me they don't do well in hot areas 🤣 what like an airing cupboard
@@mrwozo no they not Drayton. Drayton are not to bad them are danfoss and in my opinion are poor quality which is a shame as the rest of their products are spot on
Oh yes sorry my bad I've never had problems with danfoss like I said strom were ridiculous
awesome video dude and makes a lot more sense now. PB Plumber has forearms like popeye bending pipe without a struggle or getting out of breath haha
The kind of job where lagging is a god damn crime against plumbing
Lagging hates benders
thanks for the videos mate, very helpful for people learning the trade.
Great video. Ive always been curious about bending copper tubing. What type/grade of copper tubing is that. In the US the only types readily available are K, L,and M, none of which to my knowledge can be bent without kinking. Malleable copper is available in rolls (for refrigeration) but I've never seen it in straight lengths. Always willing to learn something new.
i wish all plumbers were this good and neat
Brilliant work so neat and tidy I would love to be able to do that
This tutorial video is the best I've seen. thanks for the great video.
So straightforward but so effective nice one👍
Pipe bending will soon be a lost art.
Speedfit is taking the skill away from copper work
I love watching your videos.
Looking to change career will be making calls about plumbing courses during the week can already tell your vids will be an invaluable resource.
Much appreciated +1 sub.
Having a off cut of pipe to keep you right is definitely the secret!
yeah it’s how I do all my bends
Great video again. Your Milwaukee pipe cutter cuts really quickly. Mine has had a hammering , doesn’t work nearly as well now.
Dear P B, very nice work there. (I love that). Kindly, ¿are you bending type L, or M copper pipe (rigid tubing), please? ¿Or is this bendable type copper pipe, please? Thank you for making and posting this video.
The bending was spot on. As for the precision measuring, 'Make it 550, hang on no 600.' Then it's still 100mm short lol
Good video though ;)
Thanks man we deal with imperial measurements in canada but it's all transferable I'm doing mini split systems for VRF this helped a great deal and I'm thankful 💯
Nice video, nice craftsmanship. Which bender do you use?
Nice work mate, truly satisfying to watch 😀
Great video are you being hard draw copper
Very interesting. Would love to see you collab with an electrician and compare your bending techniques.
What is that pipe cutter? Does it leave a bur inside the pipe like a pipe slice does?
Thanking you in anticipation of reply.
Very useful video for an interested DIY'er. Thank you for sharing 👍
Excellent tutorial from a true craftsman. Thank you! Will someone please indicate what brand ( and model if possible ) of tubing bender is used here?
Nice job. I like your pipe cutter.
Very good .i didnt know it this way .pipe bending was always been my guess work .
Can you do some vid tutorials similar to this for pass over and offsets please great vid thank you 👍
Hello mate, if you scroll down my videos I have 3 pipe bending tutorials one on both of those
Very good video 👏👏👏👏 never used that method before but sure work’s judging by your work. Cheers PB.
Brillant video Pete well done mate
cheers John brother
Another great video - thanks. Which press tool would you recommend?
Reference mark the 90 bend on the benders makes life much more easier, nice job overall 👍
Beautiful work there!
How would you measure the Center for the bend on a monument pipe bender?
Is that a Rothenberg bender and 22mm pipe. I oten get ripples when I bend 22mm. I am guessing this is to do with quality of the copper. Do you know if heating the pipe slightly helps?
Nice work you made that look so easy 👌
Masterclass, well-done.
brill video PB always wanted a proper pipe bending tutorial!
Great tutorial 👍
Beautiful. I miss pipe bending.
Great vid taking the time to help others do you use the press fit now I personally prefer solder . Loving my new tool bags 👍🏻👍🏻👍🏻
Thanks PB that’s helped me out 👏🏼👏🏼👊🏻👊🏻👍🏼
Loving the vids Pete...👍👍👍 keep um up mate...
How many times did Marcus bash his head on that boiler?
I’m more concerned with how many times he made me a cup of tea (not many)
A lot easier then they way they showed us in college haha neat trick 👍
Nice teaching 👍. Thank you 😊
It is Soft copper? Tipe L pipe can Be Bended?