Robot for Kids | Learn how to make DIY Otto Robot | Ut Go
ฝัง
- เผยแพร่เมื่อ 19 ม.ค. 2024
- Otto Robot - Kids will learn about robotics and coding by learning how to make the OTTO Robot. Staring with 3D printed body parts and mounting motors and microcontroller on it and powering it with battery to bring it to life. Join us on the tech journey, witness the robot's incredible moves, and unlock its full potential. This cute little robot can is very versatile and has various movement and gestures with sound. Hit link, subscribe, and share you thoughts in the comments. Let's dive into the robotics future together.
Follow Us❤️/ Contact :
Instagram: / utgo_tech
Telegram: t.me/UtGoTech
------------------------------------------------------------------------
🧑💻Code: bit.ly/491CM3m
Circuit: bit.ly/48Gnmli
USB Driver Link: bit.ly/3vHCHDE
Blockly Link: bit.ly/3vFRgrx
Arduino IDE Library used: OttoDIYLib
-----------------------------------------------------------------------
If you want customized Otto Robot Parts then order from here:
Customized Otto Robot Part: bit.ly/3SBuZE4
-----------------------------------------------------------------------
Parts Required :
1) Otto Robot Parts : bit.ly/3SpQPuj
2) Arduino Nano Board : bit.ly/3Ho0MCb
3) I/O Expansion Board: bit.ly/3Oc43Z8
4) SG-90 Servo Motor: bit.ly/3vQ1gyb
5) 16340 Charging Module: bit.ly/3tQqXyh
6) 16340 Battery : bit.ly/3RXv0AM
7) Self Latching Switch: bit.ly/3SqG2Qg
8) Jumper Cable: bit.ly/425ejYG
If you are facing any issues then ask in the comment section or contact me through Instagram. We will help you out.
Other Videos and Tutorials Links :
• Collision Avoidance Bl... : Collision Avoidance Bluetooth RC Car
• Bluetooth controlled A... : Bluetooth controlled Arduino RC Car
• How to make Heartbeat ... : How to make heartbeat monitoring device
• What is MAX30102 and h... : How to use MAX30102 Sensor
• How to use OLED with A... : How to use OLED Display
• How to use Liquid Cry... : How to use Liquid Crystal Display | LCD
Thanks for watching this Video. If you liked this video then hit the LIKE button and share it.
Please share your questions, suggestions and thoughts regarding this project in the comment section below :)
Need any help, ask in the comment section
.
If you want to support me then please subscribe to my TH-cam Channel
-- bit.ly/34GtRnZ
Thanks, see you again in my next Video.
Here my Social Links:
Twitter: / utgo2
Facebook: / ut.go.524
Instagram : / utgo_tech
Like | Share | Subscribe | Comment
#Arduino #servomotor #nano #Robot #otto #ottorobot - วิทยาศาสตร์และเทคโนโลยี
Really clever, I love it!
Thanks ❤️
great video!
Thanks
Very nice video sir❤. Waiting for Bluetooth controlled otto robot video 😊. Thank you so much sir
Sure I will make the Bluetooth Controlled Otto.
Good 👍
Thanks🎉
@@UtGoTechplease sir make solar flower project with LDR& ardino
Do you have any design suggestions?
Please share with us through Instagram.
OMG THANK YOU SOOOOOOO MUCH I did my examen and i get 189/189 !
Great👍
Thx !😊
Its working if me have a piezo buzzer and a Mini toggle switch?
What you want to add?
Piezo electric buzzer and a mini toggle switch ON - OFF
I have added both in this project
Yes? 😅
What its your buzzer ?
I have used 5 Volt Passive Buzzer.
What type of programer is used in Arduino ide
Look for AVR MkII
Very nice Sir,
Please tell rington name in 16:00
Mission impossible 🔥
🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
🔥
I want to buy full kit can you help me to buy.... Pleaseeeeee
What help do you need?
@@UtGoTech I want to contact with you for this project
You can contact me through Instagram.
Hello, I built this robot as you described, I just installed normal batteries as batteries and loaded the codes, but the robot does not walk, it does not dance, its legs close on its own, it opens, it turns left and right, what can I do? Can you help me?
It seems that the microcontroller restarts due to voltage dips. The possible reason for the voltage dip is use of normal batteries. I suggest you use a lithium based battery.
@@UtGoTech Actually, my friends did it with normal batteries. my problem was like in the codes. After I wrote the servo code you gave, it said the installation was completed, but then it gave an error but I didnt't care , then I uploaded the code Otto Blockly, after running it, it became like this. I wonder if this would happen again if I uploaded the codes to a new Arduino Nano. And I wasn't wearing a buzzer, it has nothing to do with that, right?
No issues not having a buzzer. Try calibrating the servo motors.
I asked a lot of questions but how can I calibrate it?
You can use the example calibration sketch that comes with the library.
Cant you create a laptop with carboard ( thats working Pls )
😄😄😄
Yes or no i ame big fan to you maybe you cant make this one for me…😅
🤣
No…😢
@@abirzebiri4347 That will be too fragile.
Sir where is code
You can find it in the example sketch of the Arduino IDE.
What is the voltage of the battery 🔋?
One lithium-ion battery of 3.7 volt is used in this robot along with a step up voltage regulator which increases the voltage to 5 volts.
@@UtGoTech Thank you!😄 Can we use 4 pcs 1.5 volt battery?
The battery is in this video -
th-cam.com/video/4lkLcDgVwT8/w-d-xo.htmlsi=D0eTXEtfVVhs36x8
No. 1.5 volt AA batteries will not work. You have to use Lithium based battery.
@@UtGoTech from where should I buy? is it available in Amazon
Yes, you can get it online store. Look for 16340 Lithium ion battery
P R O M O S M 😞
Sorry I didn't understand what you said
Me too 😅😅😅😅😅😅