Hello! Well, I'm not sure I understood your question correctly. But beam shooting works (if that's your question). The beam does not depend on the LED (in this case) but more on the distance between the LED and the lens and the shape of the LED. Since the LEDs are very similar in this case, the beam works the same way.
@@repair-stuff brightness and quality are very different xhp90 is fake color quality of light that comes out It is white mixed with blue makes you look very uncomfortable compared with beautiful 5000K,6500K light from the real XHP70.2 SST40 led is much brighter than chinese XHP90 and XHP70.2 is 2-3 times brighter than the SST40
@be4885 Yes, you are absolutely right about that. Well I tried to order a real XHP70.2 LED but for some reason farnell didn't approve my payment (Or didn't accepted my card). So, right now I'm working on my dissertation, I can't do a good comparison, but once I'm done with my education stuff, I'll get to it! Hopefully, It will be at the end of the summer!
Hello! Unfortunately, I have not compared the current consumption of all these models. I have the Chinese variants of the XHP50 and XHP70, but from the XHP90 I only have the LED module. I will do a comparison one day as others have asked me this too!
@@repair-stuff ok brother, looking forward to it. Oh and hey you can try a different driver that can output more than 5 amps. Seema like this stock driver is less than 2 amps.
Hello doctor. I bought a flashlight using xhp50 3vol led today. Really disappointed with that light intensity, not as expected. I think the problem lies in the driver and can I upgrade the components from the original driver? it looks similar to the one you videotaped
Hello! If I understand correctly you are replacing the LED and driver on the existing flashlight with the xhp50? And you want to know if you can use the components of the previous driver or the driver itself? In any case, you need to be aware of the voltage level of the LED and also of how much CURRENT and voltage the driver is producing. I have a banch of aliexpress drivers, I will try to make some viode abouth this. But It's a taff time for me at the moment!
@@repair-stuff It is a fake version that uses xhp50 LEDs but the driver has been cut down, it has information written on the driver that the discharge current is 1 ampere. Because of its unique shape, charging port and battery capacity indicator, it was quite difficult for me to replace it. It's not on the electronics sales site. Hopefully the doctor will have a video on power editing for the original driver
Hello friend, I would like to ask for some views and opinions from you.Can a flashlight originally using CREE XHP 35 HD LED be changed to LUMINNUS SFT-40?If possible, what will happen to the drive. Will the drive experience side effects?One more thing, can you explain a little bit the difference between CREE XHP 35 HD LED and LUMINNUS SFT-40?Is the driver using LUMINNUS SFT-40 more powerful than the driver using CREE XHP 35 HD LED? I need an explanation, help from you, my friend.
Hello! This is a very difficult question, in a way! Unfortunately, I do not have access to such flashlights, so I can only look at what the Internet has to offer. When it comes to an LED driver, two characteristics are basically important, the current and the voltage it supplies to the LED module! If the voltages on the LED terminals match (for example 3.2V), then this is a good start. Each LED module also has a characteristic current consumption (eg 1.5A). If you replace the old one with a new led that consumes more, there are three scenarios, the driver may start to emit additional heat, or the LED will shine more dimly, or there will be no change at all. In your particular case, it depends on small details that I don't know. But in general, if the voltages and current characteristics are more or less similar (3.3 and 3.2 V are still acceptable) and (1.5A and 2A), then I say that you can safely change them and nothing bad will happen. A higher current driver may be usable, it's even better! Basically, all flashlight manufacturers work with similar components and the difference is in the design and features they provide. Here is the technical data sheet for the "luminus" model: download.luminus.com/datasheets/Luminus_SFT-40-WxS_Datasheet.pdf But for "XHP32" I found the following, which may not match your model: download.luminus.com/datasheets/Luminus_SFT-40-WxS_Datasheet.pdf Another technique would be to measure the voltage on the terminals of a switched-on flashlight with a multimeter and compare the numbers actually. As far as I can find on the internet, it looks about the same. You just have to see if the XHP has a much higher voltage!
@@repair-stuff I just downloaded the data about the Luminus SFT-40 LED and I looked at it. It seems simple but in fact it is a very complicated matter.That's not even the driver in the flashlight. You're right Doc. Electric, it's actually very complicated.But if I look at the data and I make a conclusion,If I want to change LED XHP 35 HD to SFT-40, I think the driver must also be changed.In my personal opinion, CREE XHP 35 HD LED with Luminus SFT-40, the difference is very noticeable.Anyway, thanks for Doc.Electric response to my chat.I really appreciate it.One more thing, it is true that there are many types of LEDs on the market and they have many different characters and specific purposes.
You are welcome! Glad I can help you! Answering your question - yes, the markets at the moment are saturated with all kinds of LEDs and led drivers. And they all are very different and for different purposes! www.educba.com/types-of-led/ This simple article will give you more information on this topic! Overall, I'm glad you're into this stuff! Good luck mate!
@@repair-stuff It also took me a long time to understand the LED and also the flashlight. I am interested in the tactical flashlight.What I understand so far, Luminos SFT is more for throwing light. and a little spill including LED type SBT. Both are very powerful and the driver is also quite powerful compared to flashlights that use led xhp cree 35 hd.I think, I might just change the led xhp 35 hd to xhp 35hi. for a little denser and brighter. because the xhp cree 35hd has a dome.
@@Viking.Gladiator.Worrior hi mate! It seems you're very into this topic, great! Also, you should consider, that each LED has a different beam angle and the reflector is specially selected for that LED! And each LED also has a different power dissipation, so that the case is specially made to work for the best to release that heat. As I said before, this is complete stuff, you should really research this topic in depth! But if you pick a similar flashlight, chances are the apriori mentioned is also similar!
Hello! Well I'm not sure you can. You need to be aware of how much current the circuit can provide and how much the LED consumes. And the voltage depends on the type of LED. I don't know exactly the nominal LED of this model. lumen is a unit of light quantity, it is difficult to directly express it in terms of power.
Уважаемый автор, да по любому ставить хоть xhp 70 и 90 и 110, но самое главное виляет драйвер. Если драйвер выдает максимум 20ватт, xhp90 ему будет не хватает яркость свет, если ставить драйвер для xhp90 вообще будет по другому и свет очень очень яркие. Да конечно будет сильно перегреваться:)
Абсолютно согласна с тобой! Видно, что у вас есть информация и знания! Однако, согласитесь, это был хороший эксперимент, потому что поначалу я мог понять, сработает ли он вообще. Другой вопрос: найдите драйвер меньшей мощности, который еще не встроен с известным допуском по мощности, который выдает достаточную пиковую мощность для питания XHP90. Это, конечно, надо измерить, но я рад, что вы задумались, это очень важно!
@@Martin-w638 возможно, вы можете начать с корпуса какого-нибудь китайского фонарика, такого как этот: www.aliexpress.com/item/1005006904976878.html?spm=a2g0o.productlist.main.1.2c9douQoouQopS&algo_pvid=0d324789-cc18-4119-af4f-40790088f2e1&algo_exp_id=0d324789-cc18-4119-af4f-40790088f2e1-0&pdp_npi=4%40dis%21EUR%2149.52%2140.61%21%21%2153.12%2143.56%21%402103868a17240086233642917e9d34%2112000038672774343%21sea%21LV%21728130877%21X&curPageLogUid=r4bvnl81gKl2&utparam-url=scene%3Asearch%7Cquery_from%3A
Hello! Yes, longevity test after charging is on my list of things to check. It depends on the size of the battery and the current consumed (it is different for each mode). Speaking of prices, I haven't researched yet, it depends a lot on the country you are in! For example, in America, many things are cheaper than in Europe, due to import duties. But Aliexpress often sells fake brands!
@@jsplasha I guess you are right! But why do the Chinese use such a designation in their advertisements? www.aliexpress.com/item/1005001277968919.html?spm=a2g0o.productlist.main.1.3113677cDIAjtX&algo_pvid=391ae1d3-aff2-450d-afc2-d89903fdf208&algo_exp_id=391ae1d3-aff2-450d-afc2-d89903fdf208 fc2-d89903fdf208-0&pdp_npi=3 %40dis%21EUR%2130.56%2130.56%21%21%21236.72%21%21%40212279a216891412197185073d0763%2112000015558218133%21sea%21LV%210&curPageLogUid=NEfSiw2 trShK
Wait till u try the creexhp 160😎nice watch 👍
Is it really original, send me a link?
@dl.electric i didnt get it from the internet i got it as a gift directly from germany
no beam shot?
Hello! Well, I'm not sure I understood your question correctly. But beam shooting works (if that's your question). The beam does not depend on the LED (in this case) but more on the distance between the LED and the lens and the shape of the LED. Since the LEDs are very similar in this case, the beam works the same way.
@@repair-stuff brightness and quality are very different xhp90 is fake
color quality of light that comes out It is white mixed with blue makes you look very uncomfortable compared with beautiful 5000K,6500K light from the real XHP70.2 SST40 led is much brighter than chinese XHP90 and XHP70.2 is 2-3 times brighter than the SST40
@be4885 Yes, you are absolutely right about that. Well I tried to order a real XHP70.2 LED but for some reason farnell didn't approve my payment (Or didn't accepted my card). So, right now I'm working on my dissertation, I can't do a good comparison, but once I'm done with my education stuff, I'll get to it! Hopefully, It will be at the end of the summer!
How many amps was the xhp 50 taking comparing to xhp70 and xhp 90?
Hello! Unfortunately, I have not compared the current consumption of all these models. I have the Chinese variants of the XHP50 and XHP70, but from the XHP90 I only have the LED module. I will do a comparison one day as others have asked me this too!
@@repair-stuff ok brother, looking forward to it. Oh and hey you can try a different driver that can output more than 5 amps. Seema like this stock driver is less than 2 amps.
@@XS1GOLIATH1 I will definitely try to do this comparison! Thank you very much for your help and advice! See you soon :)
@@repair-stuff thankyou brother.
Hello doctor. I bought a flashlight using xhp50 3vol led today. Really disappointed with that light intensity, not as expected. I think the problem lies in the driver and can I upgrade the components from the original driver? it looks similar to the one you videotaped
Hello! If I understand correctly you are replacing the LED and driver on the existing flashlight with the xhp50? And you want to know if you can use the components of the previous driver or the driver itself?
In any case, you need to be aware of the voltage level of the LED and also of how much CURRENT and voltage the driver is producing. I have a banch of aliexpress drivers, I will try to make some viode abouth this. But It's a taff time for me at the moment!
@@repair-stuff It is a fake version that uses xhp50 LEDs but the driver has been cut down, it has information written on the driver that the discharge current is 1 ampere. Because of its unique shape, charging port and battery capacity indicator, it was quite difficult for me to replace it. It's not on the electronics sales site. Hopefully the doctor will have a video on power editing for the original driver
@@VigKing ok, I will try to make it happen! :)
Hello friend, I would like to ask for some views and opinions from you.Can a flashlight originally using CREE XHP 35 HD LED be changed to LUMINNUS SFT-40?If possible, what will happen to the drive. Will the drive experience side effects?One more thing, can you explain a little bit the difference between CREE XHP 35 HD LED and LUMINNUS SFT-40?Is the driver using LUMINNUS SFT-40 more powerful than the driver using CREE XHP 35 HD LED? I need an explanation, help from you, my friend.
Hello!
This is a very difficult question, in a way! Unfortunately, I do not have access to such flashlights, so I can only look at what the Internet has to offer. When it comes to an LED driver, two characteristics are basically important, the current and the voltage it supplies to the LED module! If the voltages on the LED terminals match (for example 3.2V), then this is a good start. Each LED module also has a characteristic current consumption (eg 1.5A). If you replace the old one with a new led that consumes more, there are three scenarios, the driver may start to emit additional heat, or the LED will shine more dimly, or there will be no change at all. In your particular case, it depends on small details that I don't know. But in general, if the voltages and current characteristics are more or less similar (3.3 and 3.2 V are still acceptable) and (1.5A and 2A), then I say that you can safely change them and nothing bad will happen. A higher current driver may be usable, it's even better! Basically, all flashlight manufacturers work with similar components and the difference is in the design and features they provide.
Here is the technical data sheet for the "luminus" model: download.luminus.com/datasheets/Luminus_SFT-40-WxS_Datasheet.pdf
But for "XHP32" I found the following, which may not match your model: download.luminus.com/datasheets/Luminus_SFT-40-WxS_Datasheet.pdf
Another technique would be to measure the voltage on the terminals of a switched-on flashlight with a multimeter and compare the numbers actually. As far as I can find on the internet, it looks about the same. You just have to see if the XHP has a much higher voltage!
@@repair-stuff I just downloaded the data about the Luminus SFT-40 LED and I looked at it. It seems simple but in fact it is a very complicated matter.That's not even the driver in the flashlight. You're right Doc. Electric, it's actually very complicated.But if I look at the data and I make a conclusion,If I want to change LED XHP 35 HD to SFT-40, I think the driver must also be changed.In my personal opinion, CREE XHP 35 HD LED with Luminus SFT-40, the difference is very noticeable.Anyway, thanks for Doc.Electric response to my chat.I really appreciate it.One more thing, it is true that there are many types of LEDs on the market and they have many different characters and specific purposes.
You are welcome! Glad I can help you!
Answering your question - yes, the markets at the moment are saturated with all kinds of LEDs and led drivers. And they all are very different and for different purposes!
www.educba.com/types-of-led/
This simple article will give you more information on this topic!
Overall, I'm glad you're into this stuff!
Good luck mate!
@@repair-stuff It also took me a long time to understand the LED and also the flashlight. I am interested in the tactical flashlight.What I understand so far, Luminos SFT is more for throwing light. and a little spill including LED type SBT. Both are very powerful and the driver is also quite powerful compared to flashlights that use led xhp cree 35 hd.I think, I might just change the led xhp 35 hd to xhp 35hi. for a little denser and brighter. because the xhp cree 35hd has a dome.
@@Viking.Gladiator.Worrior hi mate!
It seems you're very into this topic, great!
Also, you should consider, that each LED has a different beam angle and the reflector is specially selected for that LED! And each LED also has a different power dissipation, so that the case is specially made to work for the best to release that heat.
As I said before, this is complete stuff, you should really research this topic in depth!
But if you pick a similar flashlight, chances are the apriori mentioned is also similar!
Can I use 3 PCs xhp 70.3 led in just one circuit board that can produce 6,000 lumens with input of 3.7 to 4.2 volts output is 6 volt
Hello! Well I'm not sure you can. You need to be aware of how much current the circuit can provide and how much the LED consumes. And the voltage depends on the type of LED. I don't know exactly the nominal LED of this model. lumen is a unit of light quantity, it is difficult to directly express it in terms of power.
I see no reason that you can't. Find the right driver.
Уважаемый автор, да по любому ставить хоть xhp 70 и 90 и 110, но самое главное виляет драйвер.
Если драйвер выдает максимум 20ватт, xhp90 ему будет не хватает яркость свет, если ставить драйвер для xhp90 вообще будет по другому и свет очень очень яркие. Да конечно будет сильно перегреваться:)
Абсолютно согласна с тобой! Видно, что у вас есть информация и знания!
Однако, согласитесь, это был хороший эксперимент, потому что поначалу я мог понять, сработает ли он вообще. Другой вопрос: найдите драйвер меньшей мощности, который еще не встроен с известным допуском по мощности, который выдает достаточную пиковую мощность для питания XHP90. Это, конечно, надо измерить, но я рад, что вы задумались, это очень важно!
@@repair-stuffспасибо, но хочется собрать xhp110 эксперимент, но одну проблематично не могу найти отражатель и линзы, вообще они такого не выпускает😢
@@Martin-w638 возможно, вы можете начать с корпуса какого-нибудь китайского фонарика, такого как этот: www.aliexpress.com/item/1005006904976878.html?spm=a2g0o.productlist.main.1.2c9douQoouQopS&algo_pvid=0d324789-cc18-4119-af4f-40790088f2e1&algo_exp_id=0d324789-cc18-4119-af4f-40790088f2e1-0&pdp_npi=4%40dis%21EUR%2149.52%2140.61%21%21%2153.12%2143.56%21%402103868a17240086233642917e9d34%2112000038672774343%21sea%21LV%21728130877%21X&curPageLogUid=r4bvnl81gKl2&utparam-url=scene%3Asearch%7Cquery_from%3A
@@repair-stuffспасибо:)
Но большой минус им нужно эффективно охлаждает, если такую корпус с линзы да круто, но быстро перегревает и вышел из строя:(
So how long will it run on a single charge?
And how much is the Xhp90
Great vid btw👌🏻
Hello! Yes, longevity test after charging is on my list of things to check. It depends on the size of the battery and the current consumed (it is different for each mode). Speaking of prices, I haven't researched yet, it depends a lot on the country you are in! For example, in America, many things are cheaper than in Europe, due to import duties. But Aliexpress often sells fake brands!
@@repair-stuff
Thanks for replying
No such thing as an xhp90
@@jsplasha I guess you are right! But why do the Chinese use such a designation in their advertisements? www.aliexpress.com/item/1005001277968919.html?spm=a2g0o.productlist.main.1.3113677cDIAjtX&algo_pvid=391ae1d3-aff2-450d-afc2-d89903fdf208&algo_exp_id=391ae1d3-aff2-450d-afc2-d89903fdf208 fc2-d89903fdf208-0&pdp_npi=3 %40dis%21EUR%2130.56%2130.56%21%21%21236.72%21%21%40212279a216891412197185073d0763%2112000015558218133%21sea%21LV%210&curPageLogUid=NEfSiw2 trShK
of course there is @@jsplasha
xhp90 is fake led, Cree makes only xhp-35/50/70
Thank you sir! I guess you're right! However, China makes the XHP90 (face versions) so I included them.