My SCX10II Gets a Mojave 2 Body! (LEAF SPRING CONVERSION PT 2)
ฝัง
- เผยแพร่เมื่อ 24 ก.ค. 2024
- Welcome to part 2 of my Axial SCX10ii RC4WD leaf spring conversion! In this video, I share how I fit an RC4WD Mojave II 4-door hard body on the SCX10ii chassis with custom mounts, install Xtra Speed cantilever rear shocks (no cutting the bed!!), install a full MyTrickRC light kit, and add some scale accessories and details. I also add up all the scale points I'd get if I were competing using the SORRCA rules. Next - I trail test it!! Stay tuned for part 3....
Part 1: SCX10ii Leaf Spring Conversion (& my Jeep turns into a Truck!): • SCX10ii Leaf Spring Co...
Part 3: How does it perform?! Trail Running my SCX10ii Leaf Spring Conversion (Pt. 3) • How does it perform?! ...
*******************************************
SUPPORT MY CHANNEL
Become a Patron: / rcgirl
CONNECT WITH ME
On Instagram: @RC_girl / rc_girl
On Facebook: / thercgirl
Vinyl RC GIRL decals: www.etsy.com/shop/the...
RC Girl Tees: teespring.com/stores/rc-girl-merch
*******************************************
SORRCA 2020 Rules: www.sorrca.com/rules/2020rules...
ITEMS IN THIS VIDEO
RC4WD Leaf Spring Conversion Kit: bit.ly/38vCQJy
RC4WD Mojave II 4-door hardbody (fits 12.3" wheelbase): bit.ly/35MgpnT
Axial SCX10ii Cherokee XJ Kit: amzn.to/2xbUQIi
MyTrickRC UF-7 Lighting controller: www.mytrickrc.com/shop/uf-7c-...
LED Headlights: bit.ly/2OqGj6P
Xtra Speed Cantilever shocks: bit.ly/2vP4N0N
RC4WD Roll Bar Rack: bit.ly/3b8UZyR
RC4WD Toyota Decals: bit.ly/2SewKXu
Proline Scale Accessories: www.prolineracing.com/accesso...
Traxxas 3628 Receiver box: amzn.to/374xiEV
Bucket - Scale by Chris: bit.ly/2Ou6zLo
Tamiya TS-78 Field Gray spray paint: amzn.to/37j6AZP
RC4WD Onyx 1.9 beadlocks: bit.ly/2jLBKWd
Pro-Line Racing BFG Mud Terrains, Predator (1.9"/4.19"): bit.ly/2sLMvfI
ELECTRONICS
Tekin RX4 ESC: bit.ly/2ICG2sM
Tekin Roc412 motor: bit.ly/2XWQwM7
Gens Ace Adventure 5000mAh 2s lipo: bit.ly/2jMAzpt
PowerHobby 729MBL high voltage waterproof servo: amzn.to/2ulQCzN
MOJAVE II 4-door MOUNTS FOR SCX10II
DinkyRC: bit.ly/2RhDEvK
ShrinkRC body mounts: bit.ly/2UqfAcc
ShrinkRC bed mounts: bit.ly/2UrMyJ2
XTRONIC 3020 SOLDERING IRON: amzn.to/374Gd9n
MY OTHER AXIAL SCX10II BUILD SERIES VIDS
Vinyl Body Wrap: • HOW TO VINYL WRAP YOUR...
Set-up Tips & Upgrades: • SCX10ii Cherokee XJ Ax...
Lighting Kit Install: • BRIGHTEST Light Kit fo...
Winch Install: • Control a scale winch ...
Music: "We Are Unshakable" - Christian Andersen
Music from Epidemic Sound: www.epidemicsound.com/referral/oe4bav/
#SCX10ii #LeafSpringConversion #RC4WD
*******************************************
MY TH-cam FILMING GEAR: amzn.to/2yJE2wd
TH-cam BACKGROUND MUSIC: Epidemic sound - www.epidemicsound.com/referra... - วิทยาศาสตร์และเทคโนโลยี
Good job, it looks awesome. Congrats on the work done. I love the accessories on the back
It sure is an awesome looking truck!!
Love all the details, so scaled!!! 👊🏼😍👍🏼
I love how there’s so many aftermarket mods and stuff for rc cars. You wouldn’t expect that for rc planes til up at a certain margin. Makes this fun!
Love the rig and can't wait to see you take it out on the trails for a complete test. Hope it handles as good as it looks, it looks amazing! Way to go RCGIRL U ROCK!!!
The truck is awesome! But oh girl..The struggle, The struggle girl.! But Cha Made it through! Praise Be!
Love it. Reminds me of my first truck. In 1995 I had a 1983 Toyota 22r. Just finished adding the lift and new steering servo on my trx4 bronco. You doll are awesome.
WOW. You did an incredible job on that rig. It's super clean. Can't wait to hear and see how it performs. Thanks for the videos.
Weeeee coming home from work, and there is a new video! Made my day.
Wow what a great job you did, CONGRATS !!!
Wow I mean WOW!!! That really looks awesome. Great work. I cant wait for PT.3
Awesome project. Dig that color. So many ideas for my next build.
Great looking truck. I love the color and the four-door body.
That paint job looks great! I really like the flat paint.
Been watching you a few years and can’t believe other women are not doing what you do. It’s brilliant and hope all is well.
Glad to see you again
Awesome looking rigs well done on the build and the colour is lovely.
Yeah super cool, great job on the class one truck !! I love it. Really digging on the paint color. Love your videos, i'll be watching more .
Looks awesome! 10 extra points for not giving up! 👍👍👍👍👍😀
Beautiful work!! Everything on it looks great. 👍
Oh wow that's a really slick looking truck. Nice build young Lady!
Really loving the scale builds. Looks great.
Very sweet build. I love the Toyota bodies. Also, your color choice is one of my favorite....green. My toyota is army green.
Super video. Beautiful rig. 🙂
Really nicely done!
Love the color , almost the same as my Land Rover 90 , I found using the stick on alloy wheel lead weights for balancing tyres good to stick on under my body, it got the leaf springs working a lot more once the body weight was up . A roof rack would look awesome on that. Great build so far 👍
Wow that turned out really awesome you did a Grate job well done . Thanks allso for the links I'm going to need the decal sheet for my 2 door mojave and some of the other links will be handy as well . Cool thanks again for this awesome post. Cheers!
I'm loving the look of it👍☺great job Hayley!
Really nice truck! Good work!
Really an amazing job! Looks awesome!!! Can't wait till you take it to an event!
Nice build! I really don't have any suggestions! You got this!
Dude you're builds are amazing.
This is an awesome build I love it great job
Truck looks great and great video 👍
😎🤙🤘the🎨job is sick,love the accessories😎🤘🤙
That turned out awesome! Well done !
Great Job RC Girl, Thank you for those awesome videos.
Great JOB Haley 👍
That turned out beautiful, excellent work 👏👏👏
Beautiful job on the build.
Sick truck! Now im inspired 😍 Great job!
Truck Looks awesome, you did a great job.
Nice conversion. Good work
Truck looks awesome! The leaf springs are really cool
Cool build and details about Sorcca
Truck looks awesome , the color especially 👍
What a cool truck!👍😎
Nicely done.👍
it is so cool, good job, nice scale Crawler 👍👍👍😎
gorgeous build
That looks amazing
RC Gril your Toyota looks really really good! Nice and clean and your setup for the back end is a winner in my books and I hope that it works as good as it looks out on the trails.
And it looks amazing great job
Keep up the good work very well done.
Your truck looks great, You can be proud.
Something a lot of us that have Trailfinders do for quick body removal is replace the mounting screws with grub style ones then just stretch the body over them. quick easy mod and it makes living with a hardbody much easier.
nice job, it really looks cool and scale!
Nice!! Good luck out there.
Nice looking truck, can't wait to see how it drives👍👍
Awesome got her looking awesome great job 👍
Looks sweet nicely done 😁👍👍
Clean build🤙
Very nice done 👍👍
Impressed, love the color or this Truck.
I really really like this build. It is going to look amazing with a year's worth of rock rash. Next would be to start fabricating some custom bumpers and minimal cagework. That said this truck kicks ass
Looking good 👊✌️
Going to Leaf Spring suspension is the coolest ! 👍
I like the color. Olive darb is my favorite color or similar green like this truck. Can't wait to see it in action
I like it so much, you've been really good😍😍😍😍
Nice looking rig!
Muy bonito Crawler!! Gracias por sus videos, espero poder tener en breve mi pickup para mi Chanel
Hi RC Girl that completed model looks great an the suspension loveing it all that you have done looks great job done looking forward to next vlog nice one RC Girl 👍👍🤗🤗
Wow good job that is one awesome looking rig. So scale
Very awesome body shell
Great job on your conversion. You've inspired me to do the same with my jeep. I'll keep the jeep body though. I suggest use use magnets for your body rather than screws. With magnet, you can also wire your lights to them so there is no wiring cable from the body to the chassis.
Read your bio; so cool that you're a fellow science nerd as well as a fellow R/C nerd! Love the leaf springs, they give me nostalgia goosebumps for the days of my trusty Tamiya Bruiser i had as a teenager....which they now are remaking!
This build help me decide on the type and style of my very first RC. Love the style of scale crawlers.
Patiently waiting for my kit to arrive.
Oh awesome!!! What did you get?
RC Girl - I’m going with the LC70 body and the BRX01 chassis. Tons of upgrades have already been ordered.
You can use long Grub screws or cut just the head off existing screws then just flex body on to screws and wala easy secure quick body mount.
Awesome!!!!
Very nice!
I have an SSD TKP which is an scx10 frame. I put the blazer body on it. Ordered front links for the rear. I did cut my body for the shocks because they are awesome. I have the same iron! It’s awesome 😊
that is a great looking truck and you did an amazing job on the over all build; the color is great, decals fit in great and i just really like the way it looks. You are very talented and really would like to have a truck like that some day.
Awesome RC Girl I watched all the videos don from Nebraska great job
Nice looking truck for sure.
Nice work
Great job
Looks awesome. I put long grub screws in the body mount holes. Then you can flex the body to remove it .
Reeeeeeeefreshing!!!. How is it that I learnt more from watching 3 of your videos than I have done watching dozens of others. Just great content put across really well and it's not clicky.. Like I said at the beginning refreshing!.. And good work. Don't tell me you play the guitar aswell as rc and mountain biking?!?! 😮😮😁👍🏻
It is a really nice looking truck.
thing is awesome realy good work
If you install set screws in place of the body mounting screws you can mount/dismount the body by stretching it outward a little. The two black screws on the sides help hold on the bed. I mount my TF2 lwb body this way and can lift the truck by the roll bar! I have the same roll bar, btw!
I use longer, smaller diameter screws going through the body and kept in place with nylock nuts. The screws become "posts" that will slip into the holes of the mount so you never screw or unscrew anything again. Just pull outward on the sides of the body to put it on or pull it off. You can even fill in the holes to hide the screw heads or cover the lower parts with scale diamond plate. : )
Awesome a big 10
I wish we had those kind of accessories in South Africa, maybe I am just looking at the wrong Hobby Stores, AWESOME BUILD
Good job👍
That is so sweet, you did an awesome job !!! Wish i had some extra money to do that.
Hello from France, very nice Hi Lux. Really good job !!!👍😎✌
Very Nice!
Lot of work! Looks great! Im work on mine but i use hpi venture and body fits very well. Allowa me to use interiors.
I use 20mm grub screws that I set flush with the body on my TF2. It holds the body well and you just pull the body outward and lift it off. No tools required. Hope this helps, Steve.
Looks cool
nice truck!
cool looking truck.