Subaru Outback Lower Ball Joint Replacement | How to Repair a Bad Ball Joint
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2024
- Hello everyone, Today I'm come up with the 2008 Subaru Outback lower ball joint replacement video.
😎If this video has been helpful consider supporting us with a cup of coffee! 🙂
www.buymeacoff...
🛒PARTS LIST:
▪️ Ball joint: amzn.to/49zNnmA
▪️ Dielectric grease (optional): amzn.to/3HDPTMw
▪️ Anti- sieze (optional): amzn.to/42wZ2QS
🛒TOOLS NEEDED:
▪️ Breaker bar: amzn.to/42eP7Pq
▪️ Electric ratchet: amzn.to/3Sw4W12
▪️ Impact socket set: amzn.to/3Hy3fKi
▪️ Impact wrench: amzn.to/3Sfmiht
▪️ Prybar set: amzn.to/3IkSlWw
▪️ Screwdriver set: amzn.to/4b6BZ39
▪️ Socket and wrench set: amzn.to/4b6K8ob
▪️ Torque wrench 1/2: amzn.to/3AgaOB2
➡️I am part of the Amazon affiliate program and get a small commission when purchases are made through the links provided.
🔺DISCLAIMER
The information provided by Valley Mobile Automotive (“we,” “us” or “our”) on this video is for general informational purposes and entertainment only and does not replace professional advice.
All information is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the video.
By working on your own vehicle, you take responsibility for the outcome.
Under no circumstance shall we have any liability to you for any loss or damage of any kind incurred as a result of the use or reliance on any information provided on this channel. Your reliance on any information on the videos on this channel is solely at your own risk.
![일상 속 기분 좋음 [Proto disco meme]](http://i.ytimg.com/vi/DwmEIaZ7XGQ/mqdefault.jpg)
nice,
convinced me that i can do it
although my 72 years of age will make it a little tougher since i will be doing it without a lift also. but if the upper bolts arent rusted and stuck in there i may just pull it off .
thanks for the demo.
Hey Anthony I think you can pull it off 👍
You should look for a young kid and tell him that you will show him how to save $100.
Better yet, you will teach him how to save that money so he can do it from now on.
Supervise him working on your car and you will accomplish 2 things - teach him a valuable skill and get your car fixed 😁.
Be careful - youngsters nowadays come with cellphones permanently attached to their hands
Thank you for your video. Easy enough and very practical.
Saved me 500$ thank u sir just subbed 🤘🏼👍
Awesome explanation and visual!
Fantastic explanation
Thank you so much for this video.
You must not live in the rust belt I didn’t see you have to heat up that bolt must be nice. We have to heat the crap out of the bolt where I work I work in the state of Maine.
I'm doing this job in Maine right now. Currently 3 days into my 30 minute job
excellent video
Thanks! Glad this video was helpful 👍
Well done
Thanks!
Thanks for your support! Glad this video was helpful 🙂
You didn't diagnose it to see if it was bad or not!
soaked in pb blaster, and hit it with fire for 10 minutes before trying to turn the pinch bolt, aaaand it snapped in half on both sides. Hey at least it broke past the slot so I should still be able to pry it off right? 2 hours later... yeah, don't look like its coming off. Fuckin Wisconsin. Even tried lifting the prybar with a jack while I hammered on it, wouldn't move a millimeter.
I have to do the same job 😂😬I'm sure this is gonna happen to me
That was fast
I watched twice and still missed the diagnosis :(
Sorry this is just a replacement video. Someone else wrote the title. I just changed it 👍
THAT PINCH BOLT IS NOT LIKE THE ONES I HAVE EVER DONE WITHOUT BREAKING OFF!