ฝัง
- เผยแพร่เมื่อ 11 ก.ค. 2024
- For two updates in a row, Avata 2 has retained the problem of built-in stabilization. If you shoot with RockSteady or Gyroflow without a low-pass filter, you will get terrible vibrations in the material.
00:00 settings
00:04 Comparison of results
00:14 Original, without stabilization
00:34 Gyroflow stabilization
00:53 Gyroflow stabilization + low pass filter 50 Hz
01:16 RockSteady stabilization
Hi there, this is Liam from DJI Support. We apologize for the inconvenience caused. It is recommended to follow the steps below.
1）Check if the gimbal bracket is stuck, and if the rubber damper is broken.
2）Check if the propeller is misshapen or broken.
3）Check if the motor is vibrating abnormally after being started.
2. If there are no issues after the above inspection, please connect to the goggles for gimbal calibration.
3. If this issue is not fixed after calibration, or if the gimbal is malfunctioning due to external force, it is recommended to send back the product for inspection.
Thank you for your understanding and have a nice day ahead!
Hello! I am very glad that you commented on the situation.
Unfortunately, everything is fine with the drone. I have 5 Avata 2 units and they all have the same problem.
I wrote to support, they assured me that these vibrations are the normal... :). But I worked too much with Avata 1 and I know how it should be and how it shouldn’t.
@@Хэмон Thank you for your response and for informing us that you have already checked with our team. Please feel free to reach out if you have any additional questions.