Кузнецом не работал, но понимаю. Думаю, что понимаю. Не в полной мере, конешно, но понимаю. Здесь не только кузнецы показаны, но есть и другие профессии, что по горячей сетке на пенсию идут.
Are these the bolts for the giant shackles? if so, you should retitle both videos, and tie them together. These LOOK like the shackle bolts at least... OK, you got a sub. Keep up the good work. MORE detailed info please in each video!
@@nathanhale3006 I had the same idea, found the height of the “bolt” head also way too low for a normal bolt, and found out that these are actually shackle pins. From experience I know that the nuts on these pins have always a very loose fit which is no problem.
Даа.... даже через монитор почувствовал запах окалины и СОЖ. Ну опять же самого главного секрета китайцы не показали - как находили местоположение 5:30 центровочного отверстия. И здесь всё та же улыбка председателя Си.
Какое то пофигистическое отношение к работе, Облой срубают молотом, без подклакди, а просто бьют щекой привалочной. Ничем ее не защитив. Работа в перчатках на сверлильном. Складирование межоперационнки после такарного в тару вместе с облоем. Бросание готовых изделий друг на друга после гальванопокрытия. Мастра, и начальника цеха за такое депримировать, рабочих заставить заново проходить инструктаж. и лишение премии месячной
@@MatsBengtsson Thanks for the idea. I follow you so far as that *might* be a pin instead of a bolt. We can see that they take efforts to produce a high quality surface and check for tight tolerances - which would apply to pins. However, pins are used in many applications, thus i can not see why this *must* be a pin for a shackle.
@orangmakan a bolt would have had a larger (thicker) hex head. Also, the hole at the tip is for a locking. The nut to a shackle is, like the head of the pin, much thiner than a standard nut. This is at least my experience from my field of work. Commercial diver.
At least the guy running the lathe handled the parts with some care. Id about die watching someone throw my parts around like that😱
Excellent video. You show all parts of the process very well, and from different angles.
Thank you for the compliments. All the best.
Привет. Кто работал кузнецом, тот поймёт какая это тяжёлая работа. Молодцы ребята.
Thank😍
Кузнецом не работал, но понимаю. Думаю, что понимаю. Не в полной мере, конешно, но понимаю. Здесь не только кузнецы показаны, но есть и другие профессии, что по горячей сетке на пенсию идут.
Mercy, stop with that silly music.
This is not a hydraulic press, it is a friction press. Congratulations.
Impresionante! Estoy seguro de que su canal va a crecer mucho en poco tiempo para disfrute de sus suscriptores. Gracias y saludos. 🇪🇦
Gracias. Buena suerte.🥰
No lifting devices - everything is done by hand. Crazy.
Thank you for unedited footage, lot of factory edited their video on hand part job
Are these the bolts for the giant shackles? if so, you should retitle both videos, and tie them together.
These LOOK like the shackle bolts at least...
OK, you got a sub. Keep up the good work.
MORE detailed info please in each video!
They are shackle bolts which is why they are galvanized and only partially threaded near the tip.
There's going to be a full compilation released next week，Subscribe to watch：））
5.50. ЦЕНТРОВОЕ отверстие. Кстати делали на глаз - потому и деталь в станке "колбасит". Но припуска хватает. ..... Гарные болтики
الصراحة فيديوهاتك جميلة ولكن امنع الموسيقى واستمر وكل اسبوع فيديو ولا تكرر المقاطع
Bonjour 🐕 .Encore une très belle vidéo, avec des machines exceptionnelles. Merci de me faire participer. Amitiés 🐕 💓 🐕
Gees I wonder why no one had a belly on them 😂 😂 that’s some heavy grunt work nicely done though guys.
That reheating furnace in the floor with no guardrail around it is going to give me nightmares.
🤣🤣🤣🤣
Me too
can always tell where this kind of ork is dome when it still depends in so much human work
Es un trabajo infrahumano no he visto a ningún operario usar faja de cintura
Great work
Good job on throwing those bolt in together after plating. I bet those threads are messed up now.🤦♂️🤷♂️
For sure
All that hard work and they get slammed in a bin at the end.
@@nathanhale3006 I had the same idea, found the height of the “bolt” head also way too low for a normal bolt, and found out that these are actually shackle pins. From experience I know that the nuts on these pins have always a very loose fit which is no problem.
See that they are handled with care.
They were doing alright until the end bit after galv.
Господи. Сколько ручного труда. У нас в кузнице всё механизировно. На себе таскают. Дурдом.
That's a bolt, not a screw. Awesome video though. Huge difference between China and Japan.
Thanks🥰
Saya suka jika ada terjemahan seperti ini .. 👍👍
excellent video!!
Даа.... даже через монитор почувствовал запах окалины и СОЖ. Ну опять же самого главного секрета китайцы не показали - как находили местоположение 5:30 центровочного отверстия. И здесь всё та же улыбка председателя Си.
a special work!
Top demais
а почему кернит от руки на глаз?
Have a good day
Вот они какие передовые технологии
Looks like the same place they make large shackles or is this the same bolts that they use for shackles?
Looks like the same factory 🏭
I would like to see you put the size and dimensions of the stuff in the title or more info bar pls.
Iam fascinated by your videos!
Thanks🥰🥰
Какое то пофигистическое отношение к работе, Облой срубают молотом, без подклакди, а просто бьют щекой привалочной. Ничем ее не защитив.
Работа в перчатках на сверлильном.
Складирование межоперационнки после такарного в тару вместе с облоем.
Бросание готовых изделий друг на друга после гальванопокрытия. Мастра, и начальника цеха за такое депримировать, рабочих заставить заново проходить инструктаж. и лишение премии месячной
У них свой монастырь (устав)
Шаолиньский (меня название удивило ,,винтовая ковка"
Это как надпись на заборе
Производство 18 века твч ещё не изобрели
Keep sharing
bolt for bicycle?
Nah. Bolt for ladies' watch.
9:58 ...wonder why I'm having trouble starting the nut on this brand new bolt...
It's the pin to a shackle! Not a bolt.
Hard workers but why do all Chinese factories look like condemned buildings? They aught to match the drive the workers have.
Đẹp
7:14 - you have no idea, yes? Last vdo from you... Thanks
Hot dip galvanized just dip in molten bath..no way. That just cheating
I wonder how much of a cut HUNTER BRIBEN makes per bolt???
Good lord, you really shoe horned that one in huh. Would have been better if it was even remotely clever.
工作方式可以用機械取代人力，可以参考外國的案例，不要硬出力，撐不久的
是的，很多年轻人已经不愿意从事这种体力工作了
What are the bolts used for? no need for gym membership.
Ships and offshore oil platforms😊😊
Thanks
Khủng thật
Wow....those guys are gonna have bad backs for sure. Another job for robots.
Lombar pain
Discal Hernia 🙁
čas 2 : 02 to je podle mě Frikční lis a ne hydraulický, jinak paráda :D
yea, that music is pretentious..like trying to copy "Iron Man", Still very informative, thanks
0:43
why u touch it with bare hand ?
Don't you know they wear gloves for safety reasons
I can't help but touch it.🤣🤣🤣
@@Satisfyingtech116 😅
must be bolts for ship building
The hard way !
Those guys need some eye protection.
What do they use these big bolts for?
mostly ships, off-shore oil platforms, mining machines, bridges
It's the pin to a shackle! Not a bolt.
@@MatsBengtsson Thanks for the idea.
I follow you so far as that *might* be a pin instead of a bolt.
We can see that they take efforts to produce a high quality surface and check for tight tolerances - which would apply to pins.
However, pins are used in many applications, thus i can not see why this *must* be a pin for a shackle.
@orangmakan a bolt would have had a larger (thicker) hex head. Also, the hole at the tip is for a locking. The nut to a shackle is, like the head of the pin, much thiner than a standard nut.
This is at least my experience from my field of work. Commercial diver.
@@orangmakanHere's the video when the very same factory produces the rest of the shackle: th-cam.com/video/GW-E-8N-7_c/w-d-xo.html
Tragic. Health and safety at work, concepts that are not well known?
No need music I think...
Drop the music
ПО РУЛЕТКИ размер делает))). точность плюс минус
Poor worker with primitive handling tool. I prey for their back
❤❤🎉🎉
@7:09 Careful now...
👍👍👍👍
👌👌👌👌
この手の動画たまに見てその度に思うけど、ホントに安全対策がされてないよね。会社はどう考えてんだろ❔💧
THIS WORKER'S HAVE TO BE CHINESE
JAPANESE WORK DIFFERENT
MORE CLEAN AND NOT TOO SLAPPY
LIKE THIS GUY'S
Шварцнегер , сомневаюсь ,нет не сможет
Bull gang...
An upsetting scene
Тяжёлый физический труд.Похоже это в России.
Having worked in a forge shop I am appalled no one was wearing safety glasses, but hey China
작업 환경이 그리 좋지 못하네요
Какое чудовищно примитивное, тяжёлое и грязное производство.
🛠🛠🙏🏼🙏🏼🍵🍵
więcej reklam
A legenda passou do portugues para ingles , 👎
Poor quality. So, almost western countries ban China origin(India also)
Awful music. Blah
"kucie śrubowe". Sralis mazgalis. Never seen such an idiotic translation.
非常之落後的生產方式，任何上架搬移都時靠人的氣力，半點輔助工具都沒有，只能想像在中國可以做得到！
No need for your idiotic political statements
Дурацкие коментарии, не очень умного человека, как Байден!
Какой на хрен гидравлический, это фрикционный пресс.