Double Ratio and End Point on RC8X

In Double Ratio and End Point on RC8X, you can assign a switch to control the travel of each channel.
When you gently move the wheel or trigger, but there is big travel of the servos, you can set Double Ratio or End point, the functions which are friendly to the beginners.
(Note:Double Ratio function is available in firmware V1.1.1)
There is Ratio Switch, which means you can assign a switch to control it. If it is NULL, the travel of each channel will keep the current values.
I select PS3, the switch here.
The VALUE defaults to 100%. It can be set from 0, the minimum travel, to 100, the normal travel.
I’ll take channel 1 and channel 2 as an example. I reduce the travel of channel 1 and channel 2 to 50%.
NOW the setting is done.
Press PS3, 100. the normal travel.
Press PS3 again, 50. the small travel.
Return to the home page. Move the wheel or trigger, 100, the normal travel.
Press PS3, 50, the small travel.
We can also set end point to adjust the travel of each channel.
basic menu--end point.
There is also End point Switch, which means you can assign a switch to control it. If it is NULL, the travel of each channel will keep the current values.
I select PS1, the switch under the wheel.
You can set different travel for the two sides of the channel. The travel defaults to 100. Take channel 1 as an example. I set the left side 50, but the right side 70.
Press PS1, 100. the normal travel, 100.
Press PS1 again, 50 and 70 for channel 1.
Return to the home page. Move the wheel, 100, the normal travel.
Press PS1, the travel is 50 on the left and 70 on the right.
What’s the difference of End point and Double Ratio？
For Double ratio, there is only one value for each channel, so the travel on both sides of each channel will be adjusted simultaneously, and the travel can only be reduced.
For End point, there are 2 values (left and right) for each channel, so the left and right sides of each channel can be adjusted independently, and the travel can be increased or reduced.
For more details of RadioLink RC8X:
www.radiolink....
Purchase link of RadioLink RC8X:
www.aliexpress...
You can send mails to [e-mail] if you have any questions during using our products.
#fpvracing #fpv#rctransmitter #radiolink #rc8x#trending#challenge

[@8da11en]

Is it possible to have continuous rates on a dial or trim switch? Something like make dl1 change between 30‰ and 100‰ throttle as it goes from min to max

[@Radiolink_official]

Hi, sir. Sorry we do not clearly understand what continuous rate mean. You can assign a switch to change the end point between 30% and 100%. If you want the speed to be slow when you change, you can set delay for throttle and steering channel. If any question about RadioLink products please feel free to contact us. Our email is: [e-mail]

[@ShadeTree_RC]

do you offer or will there be a phone mount for this radio ?

[@Radiolink_official]

Can you describe in detail what function settings you want to make about rc8x on your phone? Then I will submit your suggestion to our R&D department. thanks!

[@ShadeTree_RC]

@@Radiolink_official a mount to mount my phone to the radio so i can drive and record at the same time

[@Radiolink_official]

​@@ShadeTree_RC Hello, sir. I understand. You want phone holder on RC8X, right? Thank you for your suggestion. The phone holder is in production now. It may come out in the future. If any question when using RadioLink products please feel free to contact us. Our email is: [e-mail]

[@Radiolink_official]

Hi, sir. Great to let you know that RC8X FPV screen holder is available now. Here below is the link for your reference.
www.aliexpress.us/item/1005006135919301.html You can contact AliExpress sales for more details if you are interested in it. If any question about RadioLink products please feel free to contact us. Our email is: [e-mail]