- 335
- 961 239
RadioLink
เข้าร่วมเมื่อ 24 ต.ค. 2014
🚀Welcome to RadioLink, where innovation meets exploration!🌟
🌍Specializing in drones, RC transmitters, flight controllers, and other accessories, we empower adventurers to probe the mystery of the sky, ground, and ocean.
👋Whether an enthusiast or a novice, you can have fun with our products. Join us to start the journey today!
LinkTree: linktr.ee/radiolink
Official Website: www.radiolink.com
Official Shop: www.radiolink.com/where_to_buy
Tel：86-755-88361717
To be our dealer: sales@radiolink.com.cn
After-sale Service Email: after_service@radiolink.com.cn
🌍Specializing in drones, RC transmitters, flight controllers, and other accessories, we empower adventurers to probe the mystery of the sky, ground, and ocean.
👋Whether an enthusiast or a novice, you can have fun with our products. Join us to start the journey today!
LinkTree: linktr.ee/radiolink
Official Website: www.radiolink.com
Official Shop: www.radiolink.com/where_to_buy
Tel：86-755-88361717
To be our dealer: sales@radiolink.com.cn
After-sale Service Email: after_service@radiolink.com.cn
Binding & Working Modes of R12F
Binding & Working Modes of R12F
RadioLink T12D comes with a R12F receiver. They are bound at the factory. So there is no need to re-bind them when you receive it. But if you buy a new R12F receiver. You need to bind it to the transmitter. I’m going to show how to bind R12F to T12D.
There are 2 steps for binding.
1.Select receiver protocol.
2.Bind.
First, Enter MAIN menu--Receiver settings--RF settings--make sure the module selection is set to internal. And for protocol, R12F supports FHSS V1, V2 and V2.1. FHSS V1 and V2 protocols support 8 channels, but FHSS V2.1 protocol supports 16 channels. When using R12F, if FHSS V1 or FHSS V2 protocol is selected, only 8 channels are available on the receiver. So it is recommended to select FHSS V2.1 protocol.
For details of the receiver protocols and compatible receivers, please refer to the table on the screen.
Now, bind them.
1.Power on the transmitter and the receiver. The flashing LED of the receiver indicates there is no binding between the the transmitter and the receiver. And also there is no signal tower on the screen of T12D.
2. Keep a distance of about 30cm between the transmitter and receiver.
3. There is a tiny black binding button on the side of the receiver. Press and hold it until the LED flashes fast.
4. The solid light of the receiver indicates the binding is complete, and the signal tower on the screen of the transmitter shows the binding is successful. If binding fails, the LED of the receiver will keep flashing slowly, please repeat the binding steps.
Once their binding succeeds, it will be stored.
Then let’s talk about the working modes of R12F. R12F supports three signal outputs: PWM, SBUS and CRSF. It has four working modes in total.
For working modes switch, we have 2 methods:
(1)Turning on/off the SBUS: Short press the binding button once to turn on/off the SBUS. Blue LED indicates the SBUS is turned on.
(2)Turning on/off the CRSF: Short press the binding button twice within 2 seconds to turn on/off the CRSF. Green LED indicates the CRSF is turned on.
Let’s check the four working modes. The signal LED here can show you the current working mode.
1.Red LED always on indicates PWM signal output, 12 channels in PWM signal.
2.Short press the binding button once to turn on the SBUS signal. Red and blue LED always on indicates PWM+SBUS signals output.
3.Short press the binding button twice to turn on the CRSF. Red, green, and blue LED always on indicates PWM+CRSF+SBUS signals output.
4.Short press the binding button once to turn off the SBUS signal. Red and green LED always on indicates PWM+CRSF signals output.
For more details of R12F, please refer to the link:
www.radiolink.com/r12f
For more details of T12D, please refer to the link:
www.radiolink.com/t12d
If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
#transmitter #radiolink
RadioLink T12D comes with a R12F receiver. They are bound at the factory. So there is no need to re-bind them when you receive it. But if you buy a new R12F receiver. You need to bind it to the transmitter. I’m going to show how to bind R12F to T12D.
There are 2 steps for binding.
1.Select receiver protocol.
2.Bind.
First, Enter MAIN menu--Receiver settings--RF settings--make sure the module selection is set to internal. And for protocol, R12F supports FHSS V1, V2 and V2.1. FHSS V1 and V2 protocols support 8 channels, but FHSS V2.1 protocol supports 16 channels. When using R12F, if FHSS V1 or FHSS V2 protocol is selected, only 8 channels are available on the receiver. So it is recommended to select FHSS V2.1 protocol.
For details of the receiver protocols and compatible receivers, please refer to the table on the screen.
Now, bind them.
1.Power on the transmitter and the receiver. The flashing LED of the receiver indicates there is no binding between the the transmitter and the receiver. And also there is no signal tower on the screen of T12D.
2. Keep a distance of about 30cm between the transmitter and receiver.
3. There is a tiny black binding button on the side of the receiver. Press and hold it until the LED flashes fast.
4. The solid light of the receiver indicates the binding is complete, and the signal tower on the screen of the transmitter shows the binding is successful. If binding fails, the LED of the receiver will keep flashing slowly, please repeat the binding steps.
Once their binding succeeds, it will be stored.
Then let’s talk about the working modes of R12F. R12F supports three signal outputs: PWM, SBUS and CRSF. It has four working modes in total.
For working modes switch, we have 2 methods:
(1)Turning on/off the SBUS: Short press the binding button once to turn on/off the SBUS. Blue LED indicates the SBUS is turned on.
(2)Turning on/off the CRSF: Short press the binding button twice within 2 seconds to turn on/off the CRSF. Green LED indicates the CRSF is turned on.
Let’s check the four working modes. The signal LED here can show you the current working mode.
1.Red LED always on indicates PWM signal output, 12 channels in PWM signal.
2.Short press the binding button once to turn on the SBUS signal. Red and blue LED always on indicates PWM+SBUS signals output.
3.Short press the binding button twice to turn on the CRSF. Red, green, and blue LED always on indicates PWM+CRSF+SBUS signals output.
4.Short press the binding button once to turn off the SBUS signal. Red and green LED always on indicates PWM+CRSF signals output.
For more details of R12F, please refer to the link:
www.radiolink.com/r12f
For more details of T12D, please refer to the link:
www.radiolink.com/t12d
If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
#transmitter #radiolink
มุมมอง: 164
วีดีโอ
How to Update the Firmware of R16F Receiver?
มุมมอง 27321 วันที่ผ่านมา
How to Update the Firmware of R16F Receiver? There are 6 steps in total. (1)Download the latest firmware of R16F from RadioLink official website. (2)Plug a Type-C cable into the Type-C port of R16F. (3)Press and hold the binding button of R16F. (4)Plug the other end of the Type-C cable into the computer and release the binding button. (5)The removable disk of R16F will appear on the computer. (...
THROTTLE HOLD function of T12D/T16D Transmitter
มุมมอง 15728 วันที่ผ่านมา
THROTTLE HOLD function of T12D/T16D Transmitter Take T16D transmitter as an example. Enter the main menu advanced setting throttle hold. Throttle hold function is to set the throttle output to a fixed value. When the throttle hold is turned on, the throttle output will jump to the locked position regardless of the current throttle position. This function is often used in two purpose: 1.To work ...
How to Update the Firmware of T16D?
มุมมอง 17428 วันที่ผ่านมา
How to Update the Firmware of T16D? There are 4 steps in total. Step 1. Download the latest firmware from RadioLink official website. (www.radiolink.com) Step 2. Copy the firmware into the transmitter. Step 3. Update the firmware on the transmitter. Step 4. Check the firmware version. Step 1. Download the latest firmware from RadioLink official website. Radio T16D Firmware. Here is the latest f...
TIMER Function of T16D/T12D
มุมมอง 158หลายเดือนก่อน
TIMER Function of T16D/T12D Take T12D as an example. Press Mode button to enter MAIN MENU Transmitter Settings TIMERS. T12D has two timers. Timer 1 and timer 2. The setting methods are the same. I’ll show timer 1. TYPE: There are two modes available, including UP and DOWN. UP: The timing starts from 0. DOWN: The timer starts counting down from the set time. ALARM is the Alarm time. When the tim...
How to Change T16D/T12D Stick Mode?
มุมมอง 220หลายเดือนก่อน
How to Change T16D/T12D Stick Mode? Take T12D as an example. The stick mode is mode 2 now, with throttle on the left joystick. Prepare screwdrivers. Use the screwdriver to remove the four screws on the two buckets, and remove the back cover. (The two buckets are used to fix the joysticks) Unplug the two connectors. Then we just need to exchange the left stick and the right stick. Remove the fou...
SWITCH SETTING Function of T16D/T12D
มุมมอง 247หลายเดือนก่อน
SWITCH SETTING Function of T16D/T12D Take T12D as an example. Press Mode button to enter MAIN MENU Transmitter Settings SWITCH SETTINGS. You can see the switches here. For T16D transmitter, there will be more switches listed here. This function can set 2 position switches as 3 position switches, or the 3 position switches as 2 position switches. If the physical switch is replaced, this function...
CONDITION Function of RadioLink T16D/T12D
มุมมอง 527หลายเดือนก่อน
CONDITION Function of T16D/T12D Hello, everyone. Today I’m going to introduce the condition function of RadioLink T16D/T12D transmitter. Take T12D as an example. Press Mode button to enter MAIN MENU Advanced Settings CONDITIONS. Up to three conditions can be set in a model. You can set the same or different switches for the conditions. When multiple switches are used to switch conditions. Condi...
Joystick Calibrate of RadioLink T12D/T16D Transmitter
มุมมอง 311หลายเดือนก่อน
Joystick Calibrate of RadioLink T12D/T16D Transmitter When there is any problem with the servo display of the transmitter or the servo value does not return to 0, check if the trim is set. If trim value is not set, but the problem still exists, please calibrate the joystick of the transmitter to solve the problem. If you have modified the stick mode, you may also need to calibrate the joystick....
How to update firmware of RadioLink T12D Transmitter?
มุมมอง 3682 หลายเดือนก่อน
How to update firmware of RadioLink T12D Transmitter? There are 4 steps in total. Step 1. Download the latest firmware from RadioLink official website. (www.radiolink.com) Step 2. Copy the firmware into the transmitter. Step 3. Update the firmware on the transmitter. Step 4. Check the firmware version. Step 1. Download the latest firmware from RadioLink official website. Here is the firmware li...
Home Screen Introduction of RadioLink T16D/T12D Transmitter
มุมมอง 6572 หลายเดือนก่อน
Home Screen Introduction of RadioLink T16D/T12D Transmitter Here is RadioLink T16D, 16 Fully-proportional Channels Transmitter, which supports different long-range modules, Rich user-defined functions, multiple languages and many other new functions. You can see all the switches of T16D here. Red power LED and green RF LED. Type-C port is up on the top. The type-C port can be used to update the...
SYSTEM SETTINGS of RadioLink T16D/T12D Transmitter
มุมมอง 4482 หลายเดือนก่อน
Take T16D as an example. Press Mode button to enter MAIN MENU Transmitter Settings SYSTEM SETTINGS. Now, let’s check the system settings. Language: The menu interface is available in multiple languages. You can select the language you want here. (Chinese, English, German, French, Russian, Japanese, Spanish and some other languages will be available.） Sound is to set the sound for system and ala...
RadioLink Automatic Driving Control System (ADCS) for Agricultural Machinery Vehicles
มุมมอง 1503 หลายเดือนก่อน
RadioLink Automatic Driving Control System (ADCS) for Agricultural Machinery Vehicles
RadioLink New Release RC Airplane D460 Turbot 2024
มุมมอง 1.1K3 หลายเดือนก่อน
RadioLink New Release RC Airplane D460 Turbot 2024
Set Different Themes for Different Models in RC8X
มุมมอง 2143 หลายเดือนก่อน
Set Different Themes for Different Models in RC8X
Throttle Delay & Channel Delay of RC8X
มุมมอง 4654 หลายเดือนก่อน
Throttle Delay & Channel Delay of RC8X
How to Replace the Antenna of R8SM Receiver?
มุมมอง 2834 หลายเดือนก่อน
How to Replace the Antenna of R8SM Receiver?
How to Test RSSI with T8FB Transmitter and Receivers?
มุมมอง 3825 หลายเดือนก่อน
How to Test RSSI with T8FB Transmitter and Receivers?
How to Test RSSI with T8S Transmitter and Receivers?
มุมมอง 2096 หลายเดือนก่อน
How to Test RSSI with T8S Transmitter and Receivers?
Set CrossFlight/Mini Pix/PIXHAWK on Helicopter / Episode 4 The First Flight of Helicopter
มุมมอง 6386 หลายเดือนก่อน
Set CrossFlight/Mini Pix/PIXHAWK on Helicopter / Episode 4 The First Flight of Helicopter
Kindly make a video with instructions about flap setup on the t12d
Hello,how to assign a function switch to the auxiliary...nothing there to assign to it
Well i wanted to ask does the T8FB really provide 1.2 miles of range ?
Mines not working and the entire setup is brand new Yes I have done all the setting correctly I don’t think it’s settings then actually plug and play as the setting on camera receiver and the receiver for connection needs to be set so it connects Or do I have a faulty setup I’ve purchased from radiolink ?
Another super helpful video, thank you Radiolink team.
Thank you for your support.
awesome thanks , worked for my TRX4 using the SWA button for the 2 speed transmission and this is exactly what i needed to finish it
Thank you for your support.
Hello! Team Radiolink! I would like to ask that the same procedure will be follow for Radiolink Crossflight ESC Calibration or I have to do External ESC Calibration. I am using 30A Simonk ESC
Hi, sir.For CrossFlight, you can follow this tutorial too. But you also need to check the detailed manual of your ESC. Because different ESC may have different calibration methods. If any question, please feel free to contact us. Our email is after_service@radiolink.com.cn
Can You please demonstrate now tank settings working?
Hi, sir. Thank you for your support. Tank settings can be achieved in PROG.MIX. The video may be available in several months. Could you please check the detailed manual of T16D? www.radiolink.com/t16d_manual If any question, please feel free to contact us. Our email is after_service@radiolink.com.cn
Kid you are the best❤
How can I install the crossflight software?
Hi, sir. You can install the firmware on CrossFlight. Just follow this tutorial to install the firmware of CrossFlight. Here is the link to download the firmware of CrossFlight: www.radiolink.com/crossflight_firmware If any question, please feel free to contact us. Our email is after_service@radiolink.com.cn
nice design and also the button press sounds soft of and of higher quality than a cheap "click click"
Thank you for your support.
Awesome thank you
what program do you recomend to do the audio configuration in? i cant seem to get a way for it to fit these specific parameters?
Hi, sir. You can use Adobe Audition to have a try. In the detailed manual of RC8X, we take Adobe Audition voice software as an example. You can check more details of Customized Voice Production from the detailed manual of RC8X: www.radiolink.com/rc8x_manual If any question, please feel free to contact us. Our email is after_service@radiolink.com.cn
connect analog vtx equipped with smart audio, so you can set power, band, channel via the osd screen. thank you
Hi, sir. We have connection diagram of CrossFlight to analog VTX. You can send email to after_service@radiolink.com.cn Then we can send it to you via email. If any question, please feel free to contact us.
Is it better than the nb4 plus pro
Hi, sir. Here is the link of RC8X for you to better know about it: www.radiolink.com/rc8x If any question about our products please feel free to contact us. Our email is after_service@radiolink.com.cn
Swd switch only works on and off. Central does nothing.
Hi, sir. Are you using RC4GS V3? SWD can work as a 2 position switch, sorry it cannot work as a 3 position switch. If you are using RC6GS V3, you can use SWB or SWC. They can work as a 3 position switch. If any question please feel free to contact us. Our email is after_service@radiolink.com.cn
RC J22
Very nice👍
I have a 3s lipo what mode is the low voltage cutoff. And ehat should i set it to?
Hi, sir. Could you please check the cutoff voltage of your lipo battery? If the full voltage is 4.2V each cell, we recommend you to set 3.7V alarm voltage for each cell. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
which driver is installed for updating firmware? any link ?
Hi, sir. The firmware update of AT10II is very easy. You don't need to install the driver. Just copy the new firmware into the disck of AT10II. Here is the link to download the firmware of AT10II: www.radiolink.com/at10ii_firmwares If any question please feel free to contact us. Our email is after_service@radiolink.com.cn
Omh fc yang di gunakan radiolink flight control tipe apa
Hi, sir.. M435 comes with RadioLink CrossRace flight controller. Here is the link of M435 for your reference: www.radiolink.com/m435 And here is the link of the FC: www.radiolink.com/crossrace If any question please feel free to contact us. Our email is after_service@radiolink.com.cn
Great video !!! I love radiolink flight the most ! 😉🙃😎 NZ 🌹
Thank you for your support
Terbangnya stabil banget... coba di angin yang bertiup agak kecang
Thank you for your feedback. We'll try it.
Bisa untuk tx radiolink at10 II apa tidak ,omh😁
Hi, sir. Sorry R16F is not compatible with AT10II. R16F is compatible with RadioLink T16D/T12D/T8FB/T8S/RC8X/RC6GS V3/RC4GS V3/RC6GS V2/RC4GS V2/RC6GS/RC4GS transmitters. If any question please feel free to contact us. Our email is after_service@radiolink.com.cn
Could You please create video how to use/connect/wire with autopilot module and how to use it? Woul be really appreciated. Thanks.
@@allabout1135 Hi, sir. R16F can be connected to the flight controller. such as CrossFlight. Then you can set waypoints in Mission Planner to achieve auto pilot. Here is the link to show how to set auto pilot: www.radiolink.com/newsinfo/475989.html And here is the link of the detailed manual of T16D, which introduces the connection of R16F to CrossFlight: www.radiolink.com/t16d_manual If any question, please feel free to contact us. Our email is after_service@radiolink.com.cn
Radiolink semakin keren..👍👍👍
mewah... dan berotot layarnya lebar.... 👍👍👍
Any info on throttle for drag racing with foam tires and prep. Any help I really appreciate it.
Hi, sir. Sorry we do not clearly understand what you mean. Here is the detailed manual of RC6GS V3 which introduces each function. If any question please feel free to contact us. Our email is after_service@radiolink.com.cn
I understand this is a new product and I am trying to help with questions, new users to this radio might have. After you update your radio's' FW, you will need to update your receivers' FW, before you can rebind it to your radio.
I have a newer version, but the OUT has PPM as the only option, also I had to switch to Red... I'm using a R12DSM.
Hi, sir. R12DSM supports PPM and SBUS signal. Red LED indicates PPM signal, while blue/purple indicates SBUS signal. If you want to use the wireless trainer cable with R12DSM, you need to make sure it is in red LED. Here is the detailed manual of R12DSM for your reference: www.radiolink.com/r6dsm_manual If any question please feel free to contact us. Our email is after_service@radiolink.com.cn
Terlalu cepat.... videonya kurang terang
Thank you for your feedback. We'll improve it in the future.
I have installed version 1.3.2. I save parameters in .txt files, but when I try to load them they say "no model file to choose". All permissions are ok. I'm using Android 12.
Hi, sir. When you save the model, you need to rename the model. Then when you loading the model, you can select the model you have saved. If there is any problem, could you please take a video to us to show how you save the model and load it? It will be helpful for us to find out the problem. If any question please feel free to contact us. Our email is after_service@radiolink.com.cn
@@Radiolink_official Ok. I have solved that problem now. Thanks. But when I save the parameters, the adjustments made with the trimmers are not saved and it is necessary to manually adjust them again for each model. I consider saving these settings to be very important, and the application does not do it.
@@vicentejoseramos7803 Hi, sir. May I know if you are using T8FB or T8S? Please make sure you have installed the latest firmware of your T8FB and T8S, and also make sure the Parameter Adjustment APP is the latest version. After adjusting the trim value, please make sure you have saved the value. Here is the latest firmware of T8FB: www.radiolink.com/t8fb_bt_firmwares If the problem still exists, could you please take a video to us? You can send it to our email after_service@radiolink.com.cn
To help those, who are having issues like I was, downloading and installing the firmware, don't let the .MAC throw ya, it will work on your PC. It's easy to install the firmware but if your radio is like mine, you will need to reset your language. My radios came with Chinese language by default and after the FW upgd, it defaulted back to Chinese.....not sure why, but it did. If that happens, do this: MODE; TRANSMITTER SETTINGS (lower left) enter, TRANSMITTER SETTINGS (scroll down ONE highlight) SYSTEM SETTINGS; Enter; scroll down to the first highlight (LANGUAGE) Enter, and then select your langauge. BTW, the upgrade erases all your settings!!
Hi, sir. Thank you for your feedback. The transmitter you receiver comes with firmware defaults to Chinese menu.They will change the menu to English later. Sorry for the inconvenience. If any question please feel free to contact us. Our email is after_service@radiolink.com.cn