ฝัง
- เผยแพร่เมื่อ 27 มี.ค. 2024
- How to remove and clean the printhead of an Epson inkjet printer XP, WP and similar models. How to clean the nozzles.
How to clean the Epson print-head with a damp cloth:
• Simple way to clean th...
Printing a nozzle test:
• Epson WF-2010 How to c... )
For any question or suggestion leave a comment.
- Activate the CC Subtitles in your language -
email: link.accessori@libero.it
other links:
www.emmegiricambi.it/ - วิทยาศาสตร์และเทคโนโลยี
Ti devo dei ringraziamenti! Di recente al lavoro siamo stati contattati da un cliente a circa 4 ore di viaggio da noi, che ha installato un nuovo toner giallo su una Brother MFC-L9577CDW, il toner non è stato riconosciuto come nuovo, probabilmente non ha "sentito" l'attuazione del sensore ottico di nuovo toner, fargli smontare la cartuccia e resettare la posizione dell'ingranaggio per telefono ovviamente non era un'opzione, ho trovato quel video sulla procedura di reset con i tasti X e Indietro e glie l'ho fatta fare. Cliente contento e non abbiamo perso una giornata di viaggio per andare lì 🤣
Molto interessante
bello
grazie!
Question. Can I use warm isopropil alcohol instead of warm water?
alcohol does not c,lean very well the water based inks
@@viandant5 isopropyl alcohol may damage the head?
So. Distilled warm water should be the suitable thing to clean??
@@jakotelsa Alcohol is harsh, there is the risk that it could damage the print-head however water it's better to dissolve water based dried inks
@@viandant5 thanks a lot. i have been using a mix of 50% isopropyl alcohol and 50% warm distilled water for years and still no damage to HP cartdrige printing heads. I Will use just distilled warm water since now
After I cleaned the print head and completely dried it, and running several cleaning cycles, no ink is showing on the paper, before cleaning it was printing but some lines are missing but after cleaning no ink is coming out from the print head
i think you let the print head too much out of the printer
No, the cleaning process took in total with drying just 20 minutes, is it possible that because I blow only air using the inject needle for drying?
@@ammarnahhal418 May be, however you can try to remove again the printhaed, put only the nozzles in warm water then after a few minutes insert it into the printer
idk..what happened but after doing some printing suddenly my printer say unrecognized ink cartridge🤷🏻...i am sure it's compatible...
I think you have to remove and reinstall the print-head. may be a connector or a cable is not correctly inserted
Ciao,
mi succede una cosa strana, nonostante ho impostato i sottotitoli tradotti in automatico in italiano continuano a essere visualizzati in inglese.
Li devo ancora mettere, lo faccio stamattina
@@viandant5 Grazie.