Great sir. I fix the PE error in my LG fuzzy logic Top load Machine. Actually I saw lot of videos and thought to call service man to repair or replace water level sensor. After watching your video I just opened the machine and found one wire out of 3 in the water level sensor was disconnected. I juts reconnected using a tap. Now it's working. Thank you 😊
Res sir,,, Thanks for video. Pls tell that hiw fix the voice command error certainly voice command has been stop where as speaker and it's wire are ok. Pls guide us. (Voice command like "clothes has been washed or other many voice instructions during the washing)
dear sir i have a wf660 lg machine, recently i got a problem of water level sensor switch. i replaced it with a new one but it fills water different leves, I tried to adjust somewhat ok but macine doent go to other steps that means after washing sometimes it doesnt continue to other actions. Thanks to you onceagain from ur channel i learnt how to check solenoid valve. i tested it ok. i am in Badulla rural area. these areas we dont have good mechanics or resource persons. if u can give me ur no i can contact u and get some help. pls help me. whats wrong in my machine. is it pcb or the water pessure sensor.
Hi Ruwan Did it work other functions properly before you adgust the new water level indicater switch? is New switch which you replaced 100% competible with original switch? You can just select only spin function for air dry and look for it works. Let me know above details. Anyway is it a front loaded machine?
@@ravifixall thanks to quick response. I can't remember what is wrong with before I replaced the new water pressure sensor switch. The problem remember was water level indicator bulbs blinked continuously with beep.so I purchased a compatible one and replaced. Then beep and blinking stopped and small change in water level in the tub. The bigger problem is that go in to next step. It gives continuous blinking of lights. It is a top loaded one. Other thing is I can't spin it and air dry when I put it into spin again continuous blinking of light after draining water. What could be the problem sir. 0714723056 WhatsApp imo Viber at any time.
@@epluseducation2307 It might be the problem with faulty water level switch, because it brig faulty signal that water hasn't completely drained out to go for next level. Try to remove the rubber tube from the tub end wich is connected to the water Level indicate switch. Then it will release if there is any air pressure remain affter drained out water completely which bring a faulty signal. and just blow it by mout to check again switch is working with the clicking noice. If you get a good clicking noice from the water Leave switch without leaking air out from switch, switch is ok. If this method doesn't work, you have to check the mother board with a machanic.
@@ravifixall thanks once again for us reply. I put the machine in to spin and after draining water I removed the rubber tube at end of tub and noticed nothing. Then I blowed air in to it then I noticed drain motor clicking and movement sound. That's all no spinning. I blowed several times and understood no clicking in water pressure sensor switch. It may be the problem . Thank you again for giving me ur time .
Few more clues: Just check the draining pipe which is out from the machine that is it block? If you have older pressure switch, just try to check it by blowing air in to it's air intake pipe for clicking noice. If it works try to replace it and check.
@@ravifixall i have tried with different plug points. Still it does not starts even after pushing the start button for several times. The digital meter shows nothing.
First check the draining hose, if it blocked this could happen. Otherwise you have to check few component, 1. Water drain valve motor If it is ok, 2. water level sensor switch.
I have 6.8KG fuzzy logic wash machine. The problem is that , outlet water value open as soon as I start the machine. So water don't stay inside the drum. How to fix this problem?
Pls Sir top loading machine water not stop taking water but eve I blow the water censor with my mouth before it well stop taking water please sir solution thanks sir
Thank you so much for this video,just got my machine working again today.
Great sir. I fix the PE error in my LG fuzzy logic Top load Machine. Actually I saw lot of videos and thought to call service man to repair or replace water level sensor.
After watching your video I just opened the machine and found one wire out of 3 in the water level sensor was disconnected. I juts reconnected using a tap. Now it's working.
Thank you 😊
Thanks for the video it really helped me alot
Could you do a video regarding major parts of fully auto washing machine and its functions
Very helpful info
Res sir,,, Thanks for video. Pls tell that hiw fix the voice command error certainly voice command has been stop where as speaker and it's wire are ok. Pls guide us. (Voice command like "clothes has been washed or other many voice instructions during the washing)
Thanks 👍 it works now .
dear sir
i have a wf660 lg machine, recently i got a problem of water level sensor switch. i replaced it with a new one but it fills water different leves, I tried to adjust somewhat ok but macine doent go to other steps that means after washing sometimes it doesnt continue to other actions. Thanks to you onceagain from ur channel i learnt how to check solenoid valve. i tested it ok. i am in Badulla rural area. these areas we dont have good mechanics or resource persons. if u can give me ur no i can contact u and get some help. pls help me.
whats wrong in my machine. is it pcb or the water pessure sensor.
Hi Ruwan
Did it work other functions properly before you adgust the new water level indicater switch?
is New switch which you replaced 100% competible with original switch?
You can just select only spin function for air dry and look for it works.
Let me know above details. Anyway is it a front loaded machine?
@@ravifixall thanks to quick response. I can't remember what is wrong with before I replaced the new water pressure sensor switch. The problem remember was water level indicator bulbs blinked continuously with beep.so I purchased a compatible one and replaced. Then beep and blinking stopped and small change in water level in the tub. The bigger problem is that go in to next step. It gives continuous blinking of lights. It is a top loaded one. Other thing is I can't spin it and air dry when I put it into spin again continuous blinking of light after draining water.
What could be the problem sir.
0714723056 WhatsApp imo Viber at any time.
@@epluseducation2307
It might be the problem with faulty water level switch, because it brig faulty signal that water hasn't completely drained out to go for next level.
Try to remove the rubber tube from the tub end wich is connected to the water Level indicate switch. Then it will release if there is any air pressure remain affter drained out water completely which bring a faulty signal. and just blow it by mout to check again switch is working with the clicking noice. If you get a good clicking noice from the water Leave switch without leaking air out from switch, switch is ok.
If this method doesn't work, you have to check the mother board with a machanic.
@@ravifixall thanks once again for us reply. I put the machine in to spin and after draining water I removed the rubber tube at end of tub and noticed nothing. Then I blowed air in to it then I noticed drain motor clicking and movement sound. That's all no spinning. I blowed several times and understood no clicking in water pressure sensor switch. It may be the problem . Thank you again for giving me ur time .
Few more clues:
Just check the draining pipe which is out from the machine that is it block?
If you have older pressure switch, just try to check it by blowing air in to it's air intake pipe for clicking noice. If it works try to replace it and check.
Thank you
How to diagnose the spin not functioning w/OE display but wash and drain is working, lg automatic topload brand, thanks friend ravi
check the drain hose first that it is clogged, and check the drain motor. Also this error could occur due to faulty water level sensor.
@@ravifixall drain hose is ok no clooged and the drain motor is working , but spin is not working , thanks again friend ravi
@@ravifixall thanks friend ravi i got, due to faulty water level sensor, thanks a lot..
My washing matching does not starts in the first place.
Check electrical connection and fuse. If power on, no water intake, just check water intake valve solenoid.
@@ravifixall i have tried with different plug points. Still it does not starts even after pushing the start button for several times. The digital meter shows nothing.
Dear sir
I have a same washing machine.Draining Process not working.Small sound is coming from inside the machine .What shouldi do?
First check the draining hose, if it blocked this could happen. Otherwise you have to check few component,
1. Water drain valve motor
If it is ok,
2. water level sensor switch.
@@ravifixall Thank you Sir,
@@ravifixall Dear sir, I have replaced the drain valve motor, But now some water leakage in drain valve.Now what should i do?
I have 6.8KG fuzzy logic wash machine. The problem is that , outlet water value open as soon as I start the machine. So water don't stay inside the drum. How to fix this problem?
Check the water level sensor, mainly this can happen due to malfunction water level sensor.
Dear sir
Please help my machine not staring after powe on no any LED light on power button after main supply to maching switch on
Make sure have power from the wall connection. Then remove the top Back panel as in this vedio and then there is a fuse in fuse holder chek it.
@@ravifixall ok sir I will try but it's to urgency bcz due to lockdown no any one comes for repair.
why drum not move only down disc move
Hi sir how can I fix the dE issue?
Check the Magnet on the door? If yoi have loose the magnet, then not possible to recognize that door is closed.
Pls Sir top loading machine water not stop taking water but eve I blow the water censor with my mouth before it well stop taking water please sir solution thanks sir
My washing machine LG error code bE what's the problem
Wow ..i will try mine
Whats wrong the washing machine only can spin.. not working the washing
this problem could occur Due to faulty drain valve motor or faulty water level sensor, check both.
My lg pcb is starting but going to be hanging how to reset pcb
No error
Bro my lg fuzzy logic 5.8kg top load not rinsing
Start with no error but not playing
Check both water intake valve solenoid and water level sensor.
Thank you