The old battery in our speaker swole so that we couldn't get it out. We forced removed it and in the process the ribbon got disconnected and got sucked under, which we didn't notice. Thanks to this video we were able to identify the issue, reconnect the ribbon (it wasn't easy getting it through the slot, though) and got a working speaker with a brand new battery. Thanks you so much for posting!
After 4 years I decided to solve the problem believing it was the battery. The connector was loose and the battery was empty, measuring 4.0 Volts without being swollen. Problem Solved. Thank you very much !🎉🎉🎉
I just noticed why is the rubber panel that covers the power button and light indicators different? It should not come off easily or rather it should not, which to prevent water from getting inside the circuitry. It's different in design from majority of jbl flip 4s
Thanks for your really helpful video. After changing the battery (for nothing) in fact the issue was the little blue ribbon which was loose. Thank you 🙏
Thank you homie. I didn't tried it yet but ima do it later. My speaker fell from 2 meters but it continued to play for 2 hours after that I turned it off and now it doesn't work. I hope this helps.
*Disable and Re-Enable the Internal Battery via program logic* Hold the JBL CONNECT button beside the power button, and volume up, until the fifth light flashes red. Then plug in the JBL Extreme if not already and power it on and do the key combo again to enable the internal battery again. -->This totally fixed my BT Connection issues and where the unit would Abruptly power down when connected via Bluetooth. Also it sound better too like it kinda sounded blown before idk maybe that like my placebo ears. I also did a *Full Reset (Bluetooth & Volume+ Buttons Held for 10 seconds till reset)*
I have to jiggle my charge cable to get it to the right spot so it will charge... where do you get replacement charge ports.... also which new model did they switch to a C charge port? Assuming they did at all.
This appears to be a bad solder joint or connector. Replacing the connector would be the ultimate fix for this. It’s actually not hard to do either. From the looks of it they were only 8 to 10 pins on it. If you have a steady hand and some patience you can take off the old one and replace it with a new one by soldering it.
@@joeygould6798 yes! but i had experienced a strange fix. So I changed the battery and the speaker worked, but it wouldn't charge(no blinking light when i connect the charger), tried resetting but no luck. I drained the battery and didn't use it for a few days, after that I was able to charge it now,LOL really strange. I suggest you start with replacing your battery first if you haven't done as that is the most common issue for JBLs.
Can you help me bro my jbl flip4 not playing while Bluetooth connection sounds are not passing from my device to my jbl .. but others phone is no problem my phone Bluetooth is connecting no problem but the sound not passing phone to jbl the problem started 2days age bro how I fix it
The old battery in our speaker swole so that we couldn't get it out. We forced removed it and in the process the ribbon got disconnected and got sucked under, which we didn't notice. Thanks to this video we were able to identify the issue, reconnect the ribbon (it wasn't easy getting it through the slot, though) and got a working speaker with a brand new battery.
Thanks you so much for posting!
After 4 years I decided to solve the problem believing it was the battery. The connector was loose and the battery was empty, measuring 4.0 Volts without being swollen. Problem Solved. Thank you very much !🎉🎉🎉
You’ve encouraged me to try it on my 6 yr old broken one! Wish me luck
Your video helped me grow the balls to have a go at fixing my speaker and it worked! Thanks a lot for sharing your knowledge
Thank you so much! I was abble to easily fix my JBL4 thanks to you and your video 👍
Great video, thanks for teaching me how to fish and not just giving me a fish. As the saying goes!!!
It's 2022 bt this video has helped me to fix my flip😊 thanks so much
Spot on diagnosis!! Thanks for the fix!!!
Fixed mine after this tutorial. Good ish!!! Thanks
I just noticed why is the rubber panel that covers the power button and light indicators different? It should not come off easily or rather it should not, which to prevent water from getting inside the circuitry. It's different in design from majority of jbl flip 4s
Good solution. I also have the same issue. JBL spoiled their name with this type of issue in most of their JBL4
Thanks for your really helpful video. After changing the battery (for nothing) in fact the issue was the little blue ribbon which was loose. Thank you 🙏
Thank you so much for this! I did exactly what you suggested and it worked!
Good video!! Should add that the speaker are strong magnets so take care with the screw driver. Just had small tear in the drum :(
Same
Dude, so grateful.
Thank you homie. I didn't tried it yet but ima do it later. My speaker fell from 2 meters but it continued to play for 2 hours after that I turned it off and now it doesn't work. I hope this helps.
And did it?? I have the same problem im fixing it now
awesome! You're a life saver!
Thrifted one of these for $10 to replace my thrice repaired flip 3, this was my exact issue. Now I have a flip 4. Thanks dude.
thank you worked great!!
I didn’t even need the help I just watched cuz I like this content thanks for helping others tho 🙏
Mine still does not work and I have pushed the ribbon down and tried turning it on
Did you have it connected to charger
Facts
Good debug and fix. Looks like a poor part/cable connector (or a bad batch), which JBL engineers selected.
*Disable and Re-Enable the Internal Battery via program logic*
Hold the JBL CONNECT button beside the power button, and volume up, until the fifth light flashes red. Then plug in the JBL Extreme if not already and power it on and do the key combo again to enable the internal battery again.
-->This totally fixed my BT Connection issues and where the unit would Abruptly power down when connected via Bluetooth. Also it sound better too like it kinda sounded blown before idk maybe that like my placebo ears.
I also did a *Full Reset (Bluetooth & Volume+ Buttons Held for 10 seconds till reset)*
What about not working volume play/pause buttons
How long does a jbl speaker last until u can buy a new one?
Thank you so much. It has been worked in my jbl
Thanks to You a fix mine
Thanks man , great help
hi what about a battery level indicator that doesn't work ..stuck at the first lamp
You plug in the charger without connected to the socket, what a trick
This has to be wrong with mine. It was working fine until after it fell over an hit the floor. Going for it!!
Yo sir how about on charge 4? Will you help me?
Very helpful, thanks very much for sharing this.
What about charge 4 can we fix it like this.
Hey! Would that work on jbl xtreme 2.? Because mine have these sings of issues..
Great video i was about throw mine away but i fixed it
Thank u so much, mine works now❤️
Thank you. Please like and subscribe ☺️
@@drakesdadtv6596kya isko hum 33 watt charger se charge kar sakte Hain??
Still didn’t work for me
Can you please tell the solution for same problem in jbl clip 2 ?
My speaker JBL Boombox not power on I have opened charging indication blinking but not power on plz suggest for solution
My speaker cracks and when I charge it, it says its full power but when I use it it discharges within a minute or two of playing the speaker.
just replace the battery,
I have the same issue
mine is the charge 4 :( i dont know where is that ribbon,really need some help !
I have to jiggle my charge cable to get it to the right spot so it will charge... where do you get replacement charge ports.... also which new model did they switch to a C charge port? Assuming they did at all.
Flip 5 bitch
@@lmzeze 🤣🤣
This appears to be a bad solder joint or connector. Replacing the connector would be the ultimate fix for this. It’s actually not hard to do either. From the looks of it they were only 8 to 10 pins on it. If you have a steady hand and some patience you can take off the old one and replace it with a new one by soldering it.
Le cambie la batería a mi jbl flip 4 y prendió pero se quedo trabada y la reinicié y ya no prende ni carga alguien sabe por que ?
I have the Same Problem With a jbl Charge 3... is there Any comparable Solution Go Fix?
Mine is charging but it won’t turn on
Thank you very much .
thx 4 the video it help alot
Hi my speaker chargers but it doesn't switch on
Bro you you save my jbl .thank you that was thenpro9
Thanks 🥳
I have a problem.. my jbl flip 4 shows charging but it's not charged.. that speaker gets off quickly.. is this the same problem?
When you remove the charger it will not work? Then its the battery itself.. Need to replace.
Hey
My Flip 4 is charging, but it doesn't turn on when hitting the power button. Do you have an idea?
I think its just the same. Open it and try to adjust the ribbon or the rubber for the power button
Does someone know how to do this on xtreme 2? Same scenario in the vid, doesn’t on and charge as well
did you figure it out my extreme 2 is having the same problem i want to fix it so bad but have no clue how to
@@joeygould6798 yes! but i had experienced a strange fix. So I changed the battery and the speaker worked, but it wouldn't charge(no blinking light when i connect the charger), tried resetting but no luck. I drained the battery and didn't use it for a few days, after that I was able to charge it now,LOL really strange. I suggest you start with replacing your battery first if you haven't done as that is the most common issue for JBLs.
can you do this with jbl charge
I think its just the same concept on the wiring. Try to open it
Just save my jbl, ty very much
I need a little screwdriver
Really ? Probably works but why err is JBL in this. Should have purchased a Sony
Can you help me bro my jbl flip4 not playing while Bluetooth connection sounds are not passing from my device to my jbl .. but others phone is no problem my phone Bluetooth is connecting no problem but the sound not passing phone to jbl the problem started 2days age bro how I fix it
Check what your phone is allowed to send via Bluetooth. Sometimes settings get changed to where media isn't allowed via Bluetooth.
Shut the fuck up
what screwdriver did you use
I just used a small philips screw driver
Obrigado amigo, realmente era esse o problema da minha JBL! Muito grato !
My jbl flp 3 suddenly switch off problem how to solve
I got 7 days but suddenly Switch off problem so how to solve
Thanks men u are a crack
Yea I ended up throwing mine in the drive way 30 times to relief myself of the headache thanks for wasting my time tho:)
Thanks a lot .
Please help me with jbl flip 3
Thank uuuu!
I did it but still doesnt work
Have you tried using other charging cable? Or try pressing the ribbon first and charge it to test if it works.
@@drakesdadtv6596 haven't yet , I will try, thank for information🙏
my ribbon came off now its history dont try this
I have the same color
The only reason why I gave the thumbs down it's because of the video quality it's bad
Hey, not everyone has got 100+ dollar cameras🤦♂️🤦♂️