I have this woop…..crashed into furniture…tree branches…the side of my truck….and it can take a licking and keep on ticking….great review….keep up the great reviews….love watching your videos… Rocco
Great review Justin! The more I fly my Mobula6, the more I love it! The thing is really frikkin' capable for a 1s whoop. Crazy power to weight ratio. I set mine up with the Jazzmaverick 48khz esc firmware and get great flight times, like 4.5 mins cruising and 3.5 going balls out on 300mah. About 30 seconds more with a 350mah. Mine powerloops just fine with a 300mah battery, I don't think a 450 or 525 is gonna do it though. I really do love this thing though, fun as hell to fly. Great camera too! I also soldered on my own RX antenna to get a bit more range. Thinking about doing the VTX antenna, but it works ok as it is. Only real upgrade i'd do is move it over to a Meteor65 frame or maybe even an old Mob7 V2 frame. Oh yeah, and DryDrone! I DryDrone'd mine cuz I crashed it into the water bowl that had some electrolyte mix in it, freaked me out for a minute, but it survived. Now with the DryDrone I don't worry about any kind of water. Actually flew mine right thru the sprinklers today! hahahahahah Edit: OH YEAH, and for $86 bucks? 4 batteries included? You really can't go wrong.
Thank you so much for this refreshingly positive review. Looks like a great little quad right out of the box. I put my Mobula 6 purchase on hold after seeing the recent reviews. But now I've decided to buy one! My Tinyhawk 2 needs a break. Lol
I started my FPV journey with this Mobula 6 have had zero issues (even after it getting wet just dried it out and still flies fine ) its a great fun flier as for quality ive had no issues after hundreds of packs , wish i could say the same for my Nazgul 5 which arrived DOA last week :(
Great review. Love the little quads. Got burned by Happy Model on my Mobula7, bad VTX and an intermittent wobble. Banggood would not replace it. Maybe QC is better on this one. Glad to read others are having good luck. Thx for your review Justin.
Love mine....I have the 19000 kv model...had some problems out of the box getting it to connect to my Taranis X9D+, but once I flashed betaflight 4.1.1 I've had no problems....it's a great flyer indoors....haven't had a chance to get it outdoors here in Ohio yet....just too wet. I get somewhere around 4.5 minutes on a 300mAh (happy model and/or betafpv) and 4.5-5 minutes on a 333mAh Tiny Whoop battery ripping around the house. Love the Mobula6 and my Tiny Hawk II.....both great fun.
I’ve got the 25000 kv version as well, for a little quad I was flying it outdoors and in a bit of wind, I was surprised at how good it is. For a little quad it gets a long well.
I have the 25,000kv version also and I LOVE it. It is great I highly recommend it. I have had zero issues. I also have the 19,000kv motors separate which I have not tried yet. The 25,000 is just too much fun using the GNB 350mah. I am also running a project mockingbird tune on my Mobula 6. Get one if you can find one in stock. I got mine from RDQ they had some in stock recently.
I saw a lot of reviewers saying that this drone is not the best for flying outdoor because the wind affects it a lot. In your opinion should I buy this drone if I want a drone to fly in my garden around trees ecc. During the summer or i should buy something bigger like a 85mm quad? PS. this would be my first fpv drone. Thanks for the answer and for the grate video!
Just got myself one of these yesterday - no way can I fly as slowly as you yet.... bouncing all over the house trying to keep under control. need to look into tuning before I destroy the pot plants.
It's a great quad, but I have problems with it, though I'm still going to persevere with it because it flies so nice. Issues I've found with mine: 1) Do a CLI dump all when you get yours, because if you try to fly it with too low voltage (below 3v) there's a chance it will brownout and the EEPROM will get wiped, erasing all your Betaflight settings (but not the firmware) causing you to have to paste a CLI dump back in, and you'll have to rebind it. Mine lost its settings 3 times now. 2) I've had some terrible range issues indoors in a certain location, RX loss and video loss when the signal was going through just two walls with lots of concrete & rebar. 3) The VTX power output levels on mine appear to be wrong: 25mW = low power, 200mW = pit mode (no picture just 6 feet behind me and I'm using RapidFire), 500mW & 800mW appear to be good. I wish I knew someone with an ImmersionRC power meter to test mine to figure out what was going on. 4) I bought another Crazybee F4FS Lite mainboard (FlySky) when I got the VTX power problem, it wouldn't bind to my T16's multimodule, I tried so hard I broke the top off the bind button. However it binds every time I try to my old Turnigy TGY-i10 transmitter (I short the bind button pins with tweesers). I bought the FlySky variant of Mobula6 for two reasons; the FrSky version was out of stock, and I have FlySky (Turnigy) transmitters as backup. My FlySky Mobula6 came with a FS82 RX and a note saying I can plug that in to the pre-wired plug if I'm having range issues with the onboard SPI receiver. I will be plugging that RX in today and doing some range tests to compare the SPI with the FS82.
Happymodel know about the issue, they even left a comment on an unlisted Mobula6 video of mine, which I'd only posted to RCGroups, that says: "Hello, can you share the dumps which fixed the resetting issues? So that we can put it on the community to help others ." There is no CLI dump or command which can fix the resetting issue that I know of, or I'd be posting it everywhere.
So I have a Spektrum control...does that mean that this model sold with the sky receiver will not work? Sorry, my fpv vocabulary is awful. Been watching your channel and really interested in the fpv quad hobby. Thought this quad would be a good starting point.
@@dronecamps yeah but does this come in an rtf package? Isn't that the best option for a beginner who isn't hip to the different components you need to source?
Hi Justin, had to look back & forth 'bout your ear ring?? You know your only wearing the right side but at the beginning you wear both. Don't worry I pierced both sides too, 6 left & 2 right, listened to a lot of Hip Hop when I was young, I left 'em coz I just grew up, bummer. Nice review as always. Sounds interesting & fun! gonna get me one but 25000 kv. I can't fly fast enough! I'd like to have a 65 powered by nuclear flying at 460 km/h (guess for you M/hr). Take care
Yes! I was waiting for this :D . I need a honest answer from you. I ordered the UR65 last week from Bangood, but now I kinda regret it cuz of the Mobula6 is popping up more and more. Im not and experinced pilot, im a beginner. I saw your QX65 VS US65 and wanted to go with brushless cuz of the motor last longer. The US65 has 19.000KV and UR65 has 17.000KV therefore I did orded the UR65 cuz of that reason lower KV motor. BUT the Mobula6 says it handles really good in the air. So my point is. Is Mobula6 for a beginner? And do I as a beginner feel the difference between 17.000KV and 19.000KV ?
It’s ok for a beginner. Quick but you can fly in stability mode. No you won’t feel the difference. But it will give a longer flight time with the lower kv
Have both and because the UR65 motors are a little smaller and slightly less powerful, I find the UR65 actually flies better in my smallish house, Same weight . but the flight time is longer with Modula and I have the 19000kv version. You will love the UR65.
Hi Justin, thanks for your content. I bought a HM Larva X. Second flight, my ESC decided to crap out. I was really disappointed. I wouldn't buy a HM again simply from an everyday consumers view as I don't have money to burn like that. I guess it's hit and miss with them.
I am not a Happy Model hater, but I spent a considerable amount of money on the HM Larva X HD and after a few flights with no crashes, the VTX quit mid-flight and I lost the quad, including a new battery and SD card. I usually buy BetaFpv, GepRC, and iFlight. The HM quality seemed poorer than these brands. While my experience is just an N of 1, I am hesitant to purchase another HM. With that said, the Larva X HD was very fun to fly and had great video for the this kind of quad and I may give HM another chance.
@@jackjohnson5024 Thanks man! Only thing that bothers me about the Tinyhawk 2 is that the flight times are only about two minutes while here it's more like 4 minutes. Do you think removing the LEDs on the tinyhawk would make it fly a little longer?
I got the the 25000kv version. They’re hard to come by now, but if I can find the 19000kv motors, could I interchange them? Just a matter of plugging the 19k in? I’d like the 19000’s too for indoors with a little better flight time.
Yep! Personally, I ordered components rather than a complete quad. But the 19000kv should just slot in, since it's the same FC. It may also require a quick tune.
i got the 25000kv version and had 19000kvs lying around. i prefer the 19000kv...not that much off a difference in power but extended flighttimes for sure.
Will the 25000kv version provide more power for freestyle or is the 19000kv version sufficient for punches and other freestyle tricks? And have you flashed JESC to your mob6? Any increase in flight time?
Gertsch you really can’t go wrong with either. Tinyhawk 2 camera probably edges it as the camera is better & it’s stronger. But both great for beginner and good enough when you get better too. Mob 6 is super light and responsive. They’re both great fun
@@jamesharvey8169 Hey James, thanks for the answer. I got the Mob6 and the Tinyhawk Freestyl II like 3-4 months ago and they are both very nice to start out with. Best investment in a hobby I have made in a looong time :) The Mob6 is glorious to fly indoor and the TH Freestyle is something for outdoors, although it's a little aggressive for my feeling - as a beginner :)
Hey so I recently got a mobula 6 and I couldent bind to my taranis 9xd plus 2019 i dont have D8 mode and im not sure the solution to this PLEASE HELP. do i need an external module?
@@dronecamps Thanks for your honest answer. Really appreciate it. I have a iflight cinebee75hd and need to transfer all the parts to a better frame. The stock frame has ducts and I cannot remove them or else the motors cannot be attached. I need a frame without ducts. Also the cinebee comes with a 16 x 16 fc stack + caddx v2 20x20 stack so im confused how to get them both onto the Frame. Kindly recommend a frame
Just bought the mobula 6 Ppl say you should fly till 3.6v and stop But the voltage on osd drop till 3.5 within a min Is it normal? When should I really plan to land? What settings should I put on minimum voltage alarm in beta flight?
I just can't get over the terrible video quality. Horizontal banding when you spool up your motors, you can see it in the sky when flying outdoors, super wavy and i haven't even mentioned jello. Really hard, not impossible to tune out the jello. The Meteor65 is just as fast and light and way smoother. I just can't fly through terrible VTX noise when I know my other whoops don't do it. Such a bummer...
I love how you actually do flips and actually show the fun flying of drones. So many videos are just slow steady flying. Keep it up!
Thx 🙏🏼!
Bro how could anyone hate a fun setup like this , just looks so cool flying under your van. Thanks 😃👊
I have this woop…..crashed into furniture…tree branches…the side of my truck….and it can take a licking and keep on ticking….great review….keep up the great reviews….love watching your videos…
Rocco
Great review Justin! The more I fly my Mobula6, the more I love it! The thing is really frikkin' capable for a 1s whoop. Crazy power to weight ratio. I set mine up with the Jazzmaverick 48khz esc firmware and get great flight times, like 4.5 mins cruising and 3.5 going balls out on 300mah. About 30 seconds more with a 350mah. Mine powerloops just fine with a 300mah battery, I don't think a 450 or 525 is gonna do it though. I really do love this thing though, fun as hell to fly. Great camera too! I also soldered on my own RX antenna to get a bit more range. Thinking about doing the VTX antenna, but it works ok as it is. Only real upgrade i'd do is move it over to a Meteor65 frame or maybe even an old Mob7 V2 frame. Oh yeah, and DryDrone! I DryDrone'd mine cuz I crashed it into the water bowl that had some electrolyte mix in it, freaked me out for a minute, but it survived. Now with the DryDrone I don't worry about any kind of water. Actually flew mine right thru the sprinklers today! hahahahahah Edit: OH YEAH, and for $86 bucks? 4 batteries included? You really can't go wrong.
Thank you so much for this refreshingly positive review. Looks like a great little quad right out of the box. I put my Mobula 6 purchase on hold after seeing the recent reviews. But now I've decided to buy one! My Tinyhawk 2 needs a break. Lol
Mine just arrived after waiting months for stock. I strapped a cheap URAV 550mah to it for slow house exploration and got a flight time of 5:30.
I started my FPV journey with this Mobula 6 have had zero issues (even after it getting wet just dried it out and still flies fine ) its a great fun flier as for quality ive had no issues after hundreds of packs , wish i could say the same for my Nazgul 5 which arrived DOA last week :(
Love your reviews and fly time. It gives me motion sickness. U da bomb
Great review. Love the little quads. Got burned by Happy Model on my Mobula7, bad VTX and an intermittent wobble. Banggood would not replace it. Maybe QC is better on this one. Glad to read others are having good luck. Thx for your review Justin.
Love mine....I have the 19000 kv model...had some problems out of the box getting it to connect to my Taranis X9D+, but once I flashed betaflight 4.1.1 I've had no problems....it's a great flyer indoors....haven't had a chance to get it outdoors here in Ohio yet....just too wet. I get somewhere around 4.5 minutes on a 300mAh (happy model and/or betafpv) and 4.5-5 minutes on a 333mAh Tiny Whoop battery ripping around the house. Love the Mobula6 and my Tiny Hawk II.....both great fun.
I’ve got the 25000 kv version as well, for a little quad I was flying it outdoors and in a bit of wind, I was surprised at how good it is.
For a little quad it gets a long well.
Love mine. No issues. Have so many packs through it I lost track.
Same I just got a second one!
So.. what is a better beginner fpv the Emax Tinyhawk or the eachine Novice 3...
I have the 25,000kv version also and I LOVE it. It is great I highly recommend it. I have had zero issues. I also have the 19,000kv motors separate which I have not tried yet. The 25,000 is just too much fun using the GNB 350mah. I am also running a project mockingbird tune on my Mobula 6. Get one if you can find one in stock. I got mine from RDQ they had some in stock recently.
I saw a lot of reviewers saying that this drone is not the best for flying outdoor because the wind affects it a lot. In your opinion should I buy this drone if I want a drone to fly in my garden around trees ecc. During the summer or i should buy something bigger like a 85mm quad?
PS. this would be my first fpv drone.
Thanks for the answer and for the grate video!
Or maybe the moblite 7 is better?
Try an 85mm smoother flying
@@dronecamps thanks for the quick answer, i will follow your advice👍
Just got myself one of these yesterday - no way can I fly as slowly as you yet.... bouncing all over the house trying to keep under control. need to look into tuning before I destroy the pot plants.
Well done. Thanks
Always great informative video's!! Thanks!! Gna get this one!
Great review much more realistic reviews much respect!
It's a great quad, but I have problems with it, though I'm still going to persevere with it because it flies so nice.
Issues I've found with mine:
1) Do a CLI dump all when you get yours, because if you try to fly it with too low voltage (below 3v) there's a chance it will brownout and the EEPROM will get wiped, erasing all your Betaflight settings (but not the firmware) causing you to have to paste a CLI dump back in, and you'll have to rebind it. Mine lost its settings 3 times now.
2) I've had some terrible range issues indoors in a certain location, RX loss and video loss when the signal was going through just two walls with lots of concrete & rebar.
3) The VTX power output levels on mine appear to be wrong: 25mW = low power, 200mW = pit mode (no picture just 6 feet behind me and I'm using RapidFire), 500mW & 800mW appear to be good. I wish I knew someone with an ImmersionRC power meter to test mine to figure out what was going on.
4) I bought another Crazybee F4FS Lite mainboard (FlySky) when I got the VTX power problem, it wouldn't bind to my T16's multimodule, I tried so hard I broke the top off the bind button. However it binds every time I try to my old Turnigy TGY-i10 transmitter (I short the bind button pins with tweesers).
I bought the FlySky variant of Mobula6 for two reasons; the FrSky version was out of stock, and I have FlySky (Turnigy) transmitters as backup. My FlySky Mobula6 came with a FS82 RX and a note saying I can plug that in to the pre-wired plug if I'm having range issues with the onboard SPI receiver. I will be plugging that RX in today and doing some range tests to compare the SPI with the FS82.
I have experince 5 times, my betaflight all setting has been reset because low voltage, crazybee lite bugs i think, hehehe
Happymodel know about the issue, they even left a comment on an unlisted Mobula6 video of mine, which I'd only posted to RCGroups, that says:
"Hello, can you share the dumps which fixed the resetting issues? So that we can put it on the community to help others ."
There is no CLI dump or command which can fix the resetting issue that I know of, or I'd be posting it everywhere.
i had the same problem, until i bought a new fc, the old one seemed to have bad vtx power issue
Still not in stock until March 18. :(
Can ELRS be added to this quad?
I am thinking about getting this drone and I'm new but I dont know what controller and the headset thing to get do you have any suggestions?
So I have a Spektrum control...does that mean that this model sold with the sky receiver will not work? Sorry, my fpv vocabulary is awful. Been watching your channel and really interested in the fpv quad hobby. Thought this quad would be a good starting point.
Betting I have over 25 hrs of air time on my mob6. All issues I’ve had have been self induced. Good little flyer.
would you recommend this for a beginner?
Absolutely!
@@dronecamps yeah but does this come in an rtf package? Isn't that the best option for a beginner who isn't hip to the different components you need to source?
I like the way it fly
Is mabula compatible with eachine literadio
Can you recommend a PID tune? Because that roll at stock is oh my god slow.
What is better? the 19000kV version or the 25000kV version?
Can you buy these products anywhere other than Banggood
Novice 3 or mobula 6 hd?
Put Jesc on it and get 30% more flight time and more control!
I did on my mob6 25k and am getting 3min on a 260mah
Hi Justin, had to look back & forth 'bout your ear ring?? You know your only wearing the right side but at the beginning you wear both. Don't worry I pierced both sides too, 6 left & 2 right, listened to a lot of Hip Hop when I was young, I left 'em coz I just grew up, bummer.
Nice review as always.
Sounds interesting & fun! gonna get me one but 25000 kv. I can't fly fast enough! I'd like to have a 65 powered by nuclear flying at 460 km/h (guess for you M/hr).
Take care
Earrings always had em. The left one fell out when I was sleeping. Just too lazy to replace it yet. 🤣🤣🤣
Yes! I was waiting for this :D .
I need a honest answer from you.
I ordered the UR65 last week from Bangood, but now I kinda regret it cuz of the Mobula6 is popping up more and more.
Im not and experinced pilot, im a beginner. I saw your QX65 VS US65 and wanted to go with brushless cuz of the motor last longer.
The US65 has 19.000KV and UR65 has 17.000KV therefore I did orded the UR65 cuz of that reason lower KV motor.
BUT the Mobula6 says it handles really good in the air. So my point is.
Is Mobula6 for a beginner? And do I as a beginner feel the difference between 17.000KV and 19.000KV ?
It’s ok for a beginner. Quick but you can fly in stability mode. No you won’t feel the difference. But it will give a longer flight time with the lower kv
@@dronecamps ok. Thank u for your answer :). Dont stop what ur doing
Have both and because the UR65 motors are a little smaller and slightly less powerful, I find the UR65 actually flies better in my smallish house, Same weight . but the flight time is longer with Modula and I have the 19000kv version. You will love the UR65.
@@whileistillcan9338 Okay, Thank you :)
450-550mah battery also possible with the 19.000 kv motors?
Yes
how low will the camera angle go for indoor flying?
Does this drone come with the beeping setting or switch so you can find it if you lose it? Like the tinyhawk?
What is faster geprctinygo 4k or mobula 6 65mm
Could a person make a upgrade the Mobula6 to a 3 or 4inch Ex frame....!?
Hi Justin, thanks for your content. I bought a HM Larva X. Second flight, my ESC decided to crap out. I was really disappointed. I wouldn't buy a HM again simply from an everyday consumers view as I don't have money to burn like that. I guess it's hit and miss with them.
I am not a Happy Model hater, but I spent a considerable amount of money on the HM Larva X HD and after a few flights with no crashes, the VTX quit mid-flight and I lost the quad, including a new battery and SD card. I usually buy BetaFpv, GepRC, and iFlight. The HM quality seemed poorer than these brands. While my experience is just an N of 1, I am hesitant to purchase another HM. With that said, the Larva X HD was very fun to fly and had great video for the this kind of quad and I may give HM another chance.
As someone who has never in my life flown a quad before, do you think this or the Emax Tinyhawk 2 is a better option?
Definitely the Tinyhawk ii. Much more controllable and wayyyy stronger and more durable. Just don't land it in water too much
@@jackjohnson5024 Thanks man! Only thing that bothers me about the Tinyhawk 2 is that the flight times are only about two minutes while here it's more like 4 minutes. Do you think removing the LEDs on the tinyhawk would make it fly a little longer?
Hello, It is compatible with Taranis X9 Lite?
Hi I am thinking about getting this little guy. Can you tell me if it has turtle mode???
It can yes in Betaflight
It works well too. I have an emax TinyHawk 2 and the turtle mode doesn’t work on 1s.
Will this bind straight up to a radiomaster tx16s?
Yes on D8
@@dronecamps thanks man I want to get one to flu around the house 😆
I'm sold. Ordering noe
I got the the 25000kv version. They’re hard to come by now, but if I can find the 19000kv motors, could I interchange them? Just a matter of plugging the 19k in? I’d like the 19000’s too for indoors with a little better flight time.
Yep! Personally, I ordered components rather than a complete quad. But the 19000kv should just slot in, since it's the same FC. It may also require a quick tune.
i got the 25000kv version and had 19000kvs lying around. i prefer the 19000kv...not that much off a difference in power but extended flighttimes for sure.
Will the 25000kv version provide more power for freestyle or is the 19000kv version sufficient for punches and other freestyle tricks? And have you flashed JESC to your mob6? Any increase in flight time?
Tinyhawk II or Mobula6? I'm a beginner wanting to fly indoor at first and then going outdoor with the same whoop. Any thoughts? :)
Did u ever find out ?
Murder Melon unfortunately not
Gertsch you really can’t go wrong with either. Tinyhawk 2 camera probably edges it as the camera is better & it’s stronger. But both great for beginner and good enough when you get better too. Mob 6 is super light and responsive. They’re both great fun
@@jamesharvey8169 Hey James, thanks for the answer. I got the Mob6 and the Tinyhawk Freestyl II like 3-4 months ago and they are both very nice to start out with. Best investment in a hobby I have made in a looong time :) The Mob6 is glorious to fly indoor and the TH Freestyle is something for outdoors, although it's a little aggressive for my feeling - as a beginner :)
Mine has been great as well no problems
Hey so I recently got a mobula 6 and I couldent bind to my taranis 9xd plus 2019 i dont have D8 mode and im not sure the solution to this PLEASE HELP. do i need an external module?
Can i bind them with a Spektrum Remote control?
Yes
But you would need to wire it up
@@dronecamps Do I have to solder a spektrum receiver? If so, do you know a light receiver of spektrum?
Not sure what the light Spektrum Rx is but you would need an sbus
is the mobula6 better or mobula6hd
This
@@dronecamps Thanks for your honest answer. Really appreciate it. I have a iflight cinebee75hd and need to transfer all the parts to a better frame. The stock frame has ducts and I cannot remove them or else the motors cannot be attached. I need a frame without ducts. Also the cinebee comes with a 16 x 16 fc stack + caddx v2 20x20 stack so im confused how to get them both onto the Frame. Kindly recommend a frame
I only paid 70 for my got it on blackfriday deals so got an even better deal!
Yo Justin - can I buy your Mobula? :p Can't find this thing anywhere :(
They’re in stock at the link below
@@dronecamps "Expected on March 16"
Just bought the mobula 6
Ppl say you should fly till 3.6v and stop
But the voltage on osd drop till 3.5 within a min
Is it normal?
When should I really plan to land?
What settings should I put on minimum voltage alarm in beta flight?
Hey guys I am looking to build a super fast 2"-2 1/2" quad any suggestions on flight controllers
I cannot bind mine to my x9 lite with my xjt lite module someone help
Hi I wanna get into fpv with the mobula 6 but I’m not sure what radio I need for this drone any suggestions? And maybe cheap if possible 😅
Taranis X7S
Drone Camps RC thanks for the quick answer😁 this thing costs about 200$ is there nothing cheaper you could recommend ?
Taranis Q X7 is nice.The jumper T12 plus is also a great radio if you like smaller radios.(if you can find it in stock)
been on a fence with this and tinyhawk 2? anyone have experience with both this tiny whoops??
how u put a 450 on this? its too big, i change frame after it break, i use beta65 Pro frame and cant fit it
you don't
I get Mobul a 6 whit xpreselrs and 19000 kb I love it but is to fast for me I can’t fly Indor
My wish is to find one friend to fly with in Southern Ohio😢 it seems no one around me loves it like I do..😊
strap on a 450!
In terms of speed it’s a bit slow. 1S is just not enough!
There is no reason to get this thing flying even faster or 2s. Get a toothpick for that.
This is more than enough!
I just can't get over the terrible video quality. Horizontal banding when you spool up your motors, you can see it in the sky when flying outdoors, super wavy and i haven't even mentioned jello. Really hard, not impossible to tune out the jello. The Meteor65 is just as fast and light and way smoother. I just can't fly through terrible VTX noise when I know my other whoops don't do it. Such a bummer...
Which whoop would you recommend?
@@tomgraham2604 The Meteor65
and after all this time of use you keep recommending it or it is the same garbage as the mobula 7 hd that exploited its fc. greetings and good vibes
6 months still going
first..haha :)