Looks great! Never feel like you need explain or apologize to the “craftsmen” or “Rivet Counters!” You are promoting the hobby and this video does a great job of making it less intimidating to someone thinking about jumping in. Looking forward to seeing more!
I build just like you do and I don't give a hoot as to what other people think. I like the way you build. Great video, BTW. Thank you for sharing your amazing layout with us and for all the hard work that it takes to document it.
Hello from Paris France! I have been following your channel with great pleasure for several months and I completely share your opinion on the “rivet counter and cie”! The main thing is to have fun in our hobby. Your work is great and inspires me for my future layout. enjoy and “merci beaucoup ”.
Bamboo is a grass - you get a different cell structure, so it takes stain differently than pine or basswood. or poplar. I'm pretty sure those dowels are 6mm diameter - roughly 11 3/8" in 1:48 scale If you have a table saw, some scrap lumber, and some time, you can crank out some custom stripwood. If by some chance you have one of the super-fine small table saws such as Micro-Mark offers, you can make scale lumber with a good finish, and much less wastage for the saw kerfs, Works really well as a second strp after you rough out some 1/4" or 3/8" or even 5/8" pieces with the standard saw.
Hello from OZ Just remember a lot of loggers used RAGE (rough as guts engineering) to get into the cutting areas. The main line to the mills would be to a higher standard of construction, but how much of a higher standard is questionable. If it looks right and works it is right. Do not apologize for your work just do the best you can with what you have, it is a hobby not a wage paying job. If it provides you with personal enjoyment and entertainment then you must be doing it right. I don't think I would have done anything different construction wise, but some nut bolt and washer castings or prints would have made a nice finishing touch before the bents where slotted in. It might also have been wise to base coat paint the swamp before the bridge went in. It will be a pain to paint now the bridge is in. That was a comment with some thought that will be 50c please LOL Don't disturb the water you don't know what's lurking below. regards John
You picked the right ones, A. That looks excellent to me too, don't get too fussy and have fun! With a bit of whimsy also...
You did a great job on it 👍👍
YOUR HAVING FUN IS WONDERFUL.
Looks great! Never feel like you need explain or apologize to the “craftsmen” or “Rivet Counters!” You are promoting the hobby and this video does a great job of making it less intimidating to someone thinking about jumping in. Looking forward to seeing more!
Hey! Thanks, I appreciate your kind comments!!!!
For my HO trestle I'm using kindling from a round of firewood - looks great!
Looking good!
Looking good.
I like your modeling. Tressell looks good. Now for some murky gator infested water.
great video. I would go with option A..
I build just like you do and I don't give a hoot as to what other people think. I like the way you build. Great video, BTW. Thank you for sharing your amazing layout with us and for all the hard work that it takes to document it.
Thank you Fred! Thanks for watching!!!!!
Hello from Paris France! I have been following your channel with great pleasure for several months and I completely share your opinion on the “rivet counter and cie”! The main thing is to have fun in our hobby. Your work is great and inspires me for my future layout. enjoy and “merci beaucoup ”.
Hello Paris!! Merci for watching !!!!!!!!
Bamboo is a grass - you get a different cell structure, so it takes stain differently than pine or basswood. or poplar.
I'm pretty sure those dowels are 6mm diameter - roughly 11 3/8" in 1:48 scale
If you have a table saw, some scrap lumber, and some time, you can crank out some custom stripwood.
If by some chance you have one of the super-fine small table saws such as Micro-Mark offers, you can make scale lumber with a good finish, and much less wastage for the saw kerfs, Works really well as a second strp after you rough out some 1/4" or 3/8" or even 5/8" pieces with the standard saw.
Oh!.... To have a model railroading friend.... 😩🚂💔
pick me, pick me for the mug 😁
Hello from OZ
Just remember a lot of loggers used RAGE (rough as guts engineering) to get into the cutting areas. The main line to the mills would be to a higher standard of construction, but how much of a higher standard is questionable. If it looks right and works it is right.
Do not apologize for your work just do the best you can with what you have, it is a hobby not a wage paying job.
If it provides you with personal enjoyment and entertainment then you must be doing it right.
I don't think I would have done anything different construction wise, but some nut bolt and washer castings or prints would have made a nice finishing touch before the bents where slotted in.
It might also have been wise to base coat paint the swamp before the bridge went in.
It will be a pain to paint now the bridge is in.
That was a comment with some thought that will be 50c please LOL
Don't disturb the water you don't know what's lurking below.
regards John
Most of the bents have not been adhered down to the water surface… so I can gently lift them up to paint beneath! Thanks for your great comments !
👍😊
Gator wrestling at it's finest
Can I subscribe more than once to increase my chances?😁