I have polo 1.2 three cylinder i put OBD machine got cylinder 2 misfire then I change coils and plugs all of them it remains same then I change injector rail and code is same again what to do cause car is doing slight misfire it's engine compression problem
Bars works great under 2 conditions. 1. Your car isn't on it's death bed already. 2. After you use it, drive it easy. No punching the gas or sudden excelerations. Try to keep the RPMs under 3000
Is there anything that I can use to permanently fix it the doesn't really cost that much?? I have a sudden problem with my head gasket and I just don't wanna go in to all these mechanics and stuff so I can spend the same amount that I spent on my car.
Got you pour in the stuff you're supposed to turn the heater on high let it run for 20 minutes then shut the car off for about an hour then Crank It Up to see if it still smokes
I was dubious on these snake oil fixes, but it worked. Our car overheated as the radiator cracked and ran low on water. I replaced the radiator and it wouldn't overheat or use water while running but from then on it took 50 to 100mls of water from the header tank each time the car cooled down. It would also start up with a cylinder down for a few seconds on each cold start. I assume each time it cooled it drew water into at least one cylinder. After using this, it seems to be working, it now starts on all cylinders. I'll update in a week as to if its still using water!
Hi. Worked great for my 2008 Rav4 V6. Had 2 minor exterior head gasket leaks and it stopped them in their tracks!
I have polo 1.2 three cylinder i put OBD machine got cylinder 2 misfire then I change coils and plugs all of them it remains same then I change injector rail and code is same again what to do cause car is doing slight misfire it's engine compression problem
Bars works great under 2 conditions.
1. Your car isn't on it's death bed already.
2. After you use it, drive it easy. No punching the gas or sudden excelerations. Try to keep the RPMs under 3000
Thanks for the vid I needed it
I've used the product step by step and for me, my engine consumes more coolant than before.
Richard Ojeda try K seal properly researched product. Just look on reviews rate. No other recommendations needed.
Tomasz Trzciński thanks for the recommendation.
Is there anything that I can use to permanently fix it the doesn't really cost that much?? I have a sudden problem with my head gasket and I just don't wanna go in to all these mechanics and stuff so I can spend the same amount that I spent on my car.
ClifMar23 no unless you replace it
Just what I was looking for *Thumbs up*
Thanks for the info bro
Does it really work? I've heard that it doesn't.
Well.... it does but just not permanently
He was supposed to let the car idle for 20 minutes then let the car cool off 1 Hour or 2 hours
Got you pour in the stuff you're supposed to turn the heater on high let it run for 20 minutes then shut the car off for about an hour then Crank It Up to see if it still smokes
Don't add it when the engine is warm...works best when cold.
I just realized that a car is made up of simple stuff.... Check out the bottles to the front.. haha
may want to try the bears gasket leak
I was dubious on these snake oil fixes, but it worked.
Our car overheated as the radiator cracked and ran low on water. I replaced the radiator and it wouldn't overheat or use water while running but from then on it took 50 to 100mls of water from the header tank each time the car cooled down. It would also start up with a cylinder down for a few seconds on each cold start. I assume each time it cooled it drew water into at least one cylinder.
After using this, it seems to be working, it now starts on all cylinders. I'll update in a week as to if its still using water!
spinnanz how’d it go? Still good?
Will try this
Nice really nice
Thanks for the info bro