I installed a rebuilt head on my 1974 Datsun, after it spit the gasket. It still continued to leak coolant into the cylinders. Most likely an issue with the block deck. So I tried this sealer and it worked instantly. Time will tell if it keeps working, but so far so good. Just remember to shake it a lot before installing it.
@@Иванпонимаете-г4ш It gave out. To be entirely fair, the block deck was bad after all. So I doubt if any sealer would have worked. If it was just a gasket issue i would definitely try it again.
All makes and models, just be sure to read instructions and have the heater going when your letting it idle for the 15 minutes. If you don't the heater core and everything else may become clogged.
Replace my rangers head gasket with basically no experience, youtube, and some help from my grandpa…. And she blew again 3 months later. Could be due to the cracked head we halfass repaired with jb weld. But it definitely is possible
@@danagold7115 yeah I watched that one too. I did eventually use the product you used but didnt have the hoped for results. In the process now of doing a full head gasket job and cylinder head because it overheated too much. Oh well. Perhaps if I used it sooner it would have prevented all this.
Not much of a test, you only drove the car a thousand miles in one year? What kind of test is that? No real information here other than to not open the radiator cap while the engine's hot...🙄🙄
Head gasket seems to have blown last week and I put half a bottle for my 3 cylinder Honda civic. Coolant reservoir cap keeps blowing off. Two days in its still overheating after driving for half an hour. I was told it should take a few days and some start ups to start working, I’ll report back after a week. (Car passed the 20 minute idle test and I blasted the fan/heat while on idle for 15 minutes)
I installed a rebuilt head on my 1974 Datsun, after it spit the gasket. It still continued to leak coolant into the cylinders. Most likely an issue with the block deck. So I tried this sealer and it worked instantly. Time will tell if it keeps working, but so far so good. Just remember to shake it a lot before installing it.
Gotta love a L series
How’s it holding up bud ?
@@Иванпонимаете-г4ш It gave out. To be entirely fair, the block deck was bad after all. So I doubt if any sealer would have worked. If it was just a gasket issue i would definitely try it again.
I have a bubbles on my Daihatsu Sirrion 2005 no white smoke no overheating but has bubbles. Can this fix my the problem? Thank you
Skip to 3:04 if you watched the earlier video on this product. You're welcome.
Very good Advice I used it in My Truck 1998 F150 with 300k Mi, it seems like it works, Thnk U
So is is the leave in treatment or the one you gotta flush the coolant out ,then flush the product before adding antifreeze
Good Question.! But direction not say so,
Would it work in a 1997 Ford 150
All makes and models, just be sure to read instructions and have the heater going when your letting it idle for the 15 minutes. If you don't the heater core and everything else may become clogged.
O.K., but how many miles did you put on the car after using the product?
He literally said. It was like 1k
I’m assuming that your car doesn’t overheat anymore? I may have missed it if you mentioned that.
He says it in the title of the video. Duhh
So you only put 1,000 miles on the car in a year?
I was told i need new head gaskets. Will this sealer work for 2005 hyandai tucson gls v6 engine 2wd
it should
I wanna try this but I also don't wanna fuck something up. I have a 2006 nissa Altima 2.5. should I do it ?
YOLO.
It's an older inexpensive car. I'd say give it a go! I just threw it in a 2013 dodge journey lol. No leaks yet.
Replace my rangers head gasket with basically no experience, youtube, and some help from my grandpa…. And she blew again 3 months later. Could be due to the cracked head we halfass repaired with jb weld. But it definitely is possible
does not help someone that puts more miles in a week then you did in a year.
Helped me
So a year later and you only managed to put 1,000 miles on the vehicle? Thats really not much of an update honestly.
You should check out a video were the mechanic does a two year research test on this product. Chris fix.. he more detail and very informative
@@danagold7115 yeah I watched that one too. I did eventually use the product you used but didnt have the hoped for results. In the process now of doing a full head gasket job and cylinder head because it overheated too much. Oh well. Perhaps if I used it sooner it would have prevented all this.
Well this work on a 2008 audi A8L
What about now ?
Click bait you got me
How
Good video. You talk too much, though. You're from way up North, I can tell.
Not much of a test, you only drove the car a thousand miles in one year? What kind of test is that?
No real information here other than to not open the radiator cap while the engine's hot...🙄🙄
Head gasket seems to have blown last week and I put half a bottle for my 3 cylinder Honda civic. Coolant reservoir cap keeps blowing off.
Two days in its still overheating after driving for half an hour. I was told it should take a few days and some start ups to start working, I’ll report back after a week.
(Car passed the 20 minute idle test and I blasted the fan/heat while on idle for 15 minutes)
Well what's the update?