DIY Loadcell Sim Racing Pedal - 1) Machining
ฝัง
- เผยแพร่เมื่อ 11 พ.ค. 2022
- Download the CAD Model here : www.diysimstudio.com
Instagram : / diysimstudio
Music :
Song: Syn Cole - Feel Good [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/feelgood
Watch: • Syn Cole - Feel Good |...
Song: Electro-Light - Symbolism [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/symbolism
Watch: • Electro-Light - Symbol...
#simracing
#diyprojects
#diy
#simracer
#assettocorsa
#iracing
#dirtrally2
#granturismo
#rfactor2
#thrustmaster
#fanatec
Does the cad model also have the Stl's for the 3D printed parts?
Yes
@@diysimstudio8225 it's very extensive. is there an easy way to get a parts list out of the zip for a complete pedal Lazer cut parts?
Where do you buy the load cells?
On Aliexpress, see the required part tab on the website
@@diysimstudio8225 sorry but I can't find the required parts links on the website .
is it also in the zip file I purchased?
@@andytaylor8802 www.diysimstudio.com/produit/diy-sim-racing-pedal/ go to "PARTS BUYING GUIDE: ELECTRONICS" section
@@diysimstudio8225 ok thanks for that. You have put a lot of work into that. I don't think I would have found that. (Unless the link is in the zip) ;)
I am surprised you have that info as an open link. I would have protected it in the zip due to the work involved even just writing it all up.
Finally for anyone thinking of purchasing the plans. They are well worth the money. But I recommend you read and look at everything twice. It took me a while to realise you can use 3mm or 5mm material. I thought some parts were made out of 3 and some 5 but I don't think that's the case.
One thing I am not sure is whether 3mm is recommended for stainless and 5mm for Aluminium?
@@andytaylor8802 thanks for your advices. I recommend stainless steel for the laser cutting, and the different thickness is mandatory. You must get 3mm and 5mm parts to build the pedal. The parts in the "3mm thickness" folder must be 3mm thickness, as for the parts in the "5mm thickness" folder.