Heat Shrink Cable Joint - 11kV 3 Core XLPE & EPR High Voltage Cable Joints
ฝัง
- เผยแพร่เมื่อ 13 พ.ค. 2014
- THORNE & DERRICK INTERNATIONAL | SHRINK POLYMER SYSTEMS UK MAIN STOCKISTS
Contact us for Competitive Prices & Fast Delivery from Stocks
To See The Full Shrink Polymer Systems Range That T&D Offer Click Here -
www.powerandcables.com/manufa...
SPS 11kV heat shrink cable joints are tested and specified to joint high voltage 3 core power cables with XLPE or EPR insulation and steel wire armour (SWA) and steel wire braid (GSWB) - cable joints can utilise either compression connectors or mechanical shear bolt connectors.
To See The Full Range Of High Voltage Cable Joints, Terminations & Connectors Click Here -
www.powerandcables.com/produc...
11kV heat shrink cable joints are ideal for direct burial, overhead and vertical cable jointing of 3 core cables.
T&D provide both stock and manufacturing solutions for a broad range of offshore and marine specification cable joints including standard cable joint products to BS6883, BS7917, NEK606, IEEE1580, MCGH and IEC60092-3, including options for flame retardant and fire resistant cables to IEC-60332 and IEC-60331.
SPS high voltage cable joint kits are designed and tested to BS7888 and Cenelec HD 628 S1 and HD 629 S1 - HV cable joints kits are available to joint XLPE, PILC, PICAS, EPR and Triplex high voltage power cables at 6.6kV, 11kV, 15kV and 33kV voltages.
17.5kV, 24kV and 33kV 3 core cable joints utilising heat shrink technology are also available.
SPS Heat Shrink Cable Joints & Cable Terminations - Quality Performance Testing: Shrink Polymer Systems heat shrink cable joints and cable termination kits are tested to BS7888 which incorporates Cenelec Standards HD 628 S1 and 629.1 S2 : 2006, DIN VDE0279 and IEC60502.
BLOGS | Cable Joints & Terminations
High Voltage Cable Joints
www.powerandcables.com/highvo...
Some Thoughts On MV HV Heat Shrink Cable Joints & Cable Terminations
www.powerandcables.com/heat-s...
MV Cable Accessory Technologies | Heat Shrink, Cold Shrink & Push-on
www.powerandcables.com/mv-cab...
3M Terminations | Surface Tracking on Medium Voltage Cable Terminations by 3M Electrical
www.powerandcables.com/3m-ter...
Cold Shrink vs Heat Shrink - The Real Difference
www.powerandcables.com/cold-s...
#heatshrink cablejoints #11kv
THORNE & DERRICK INTERNATIONAL
Thorne & Derrick International are specialist distributors of LV, MV & HV Cable Installation, Jointing, Duct Sealing, Substation & Electrical Equipment - servicing UK and global businesses involved in cable installations, cable jointing, substation, overhead line and electrical construction at LV, 11kV, 33kV, 66kV and EHV.
Stocking & Supplying Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV | UK & Export Sales
Phone: +44 (0)191 410 4292
Email: uksales@thorneandderrick.co.uk
www.powerandcables.com/ - วิทยาศาสตร์และเทคโนโลยี
![[TH] VCT Masters Shanghai Playoffs DAY 1 // 100T vs FUT | FNC vs GEN](http://i.ytimg.com/vi/erQ7pGChzxA/mqdefault.jpg)
Today once again the TH-cam algorithm has reunited us here to watch this random video at 3am
I can relate to this
Damn right... 1:36am
I was watching tennis games.... Then this
Пор до р за ми для лендинга на о
😅😅😅
This is my dads company i too do not know how this has happened
Now I can splice my 11kV primary line for my new secret laboratory. I origionally ran my primary too short. This will solve my problem so I can resume taking over the world.
Just watch out for annoying sisters and/or midget rivals.
dexters laboratory lol
@Eìon O'hInneirghe ha ha ha ha ha haa
Learn how to spell "originally" first, then think about taking over, please.
Just a heads up for ya on your 'world conquest'.
It's going to take a LOT of effort to get past my 500kV energised faraday cage I've built as a 'panic room'.
I guess you COULD just wait for the batteries to run down, but since Elon Musk grabbed all the Li-Ion cells, I chose to use a Thorium-based LFTR inside the cage instead.
Given the half life of my Thorium stockpile, I think I should be god for about 13 or so billion years
Being a retired electrician, I can tell you that is a back breaking job out in the real world. That cable weights a lot and it man handles YOU. Vid is a good one for showing how it's done, and I wish it was just as easy in the real world. He did a great job on that cable.
yeah this video is a best case scenario, inside, cable nicely elevated from the ground and supported....
Definitely not that easy in a manhole/vault, and that's me doing single conductor 1mil mcm
When I did 3 phase splices, I always staggered my butt joints
I've seen it done standing in a trench while a sump pump was running to remove the water the guy was standing in... not exactly laboratory conditions...
@@davep6977 this is a high voltage joint,you cannot place connections where u would want..there are strict measurements the jointer must follow
Look at how methodical this gentleman is with every point of the work process. This is almost medicinal.
Electrical high voltage installations deserve the utmost attention and highest standards. Long-term safety first.
How many layers of protection do we need?
Engineer: *YES*
Engineer2: More Layers!
11kV 3 Core XLPE & EPR High Voltage ⚡ If you do it above the ground than one layer of air is sufficient :)
@@gorillaau more!
What is need for safety this connection after not any problems
@@ArthursHD فبررر
I don't know what it is, but these industrial cabling demonstrations are friggen fascinating to no end.
+phuturephunk i have little to no experience in anything electrical. i'm kind of handy, do my own work on the car. For some reason i've been watching the shit out of these!
Yes they are I'm an electrician and this are very critical connections you have to be trained how to do them
phuturephunk ok good I'm glad I'm not the only one that fell down this rabbit hole.
phuturephunk
Live LV jointing is more fun especially on old lead cables
To all electrician in this world, you have done great job to keep this world running.
since no one said it yet, on behalf of every proud electrician: thanks!
Me: “I’m not going to watch the entire things.”
Also me: *watches entire thing*
That would be a pain in the ass if you connected the wires and forgot to slide the shrink wrap on first.
+99beta Exactly what I was thinking. That step should have been in the first part of the video.
+FREDDIE MAXWELL you mean the part at 0:11 ?
Not a big worry, there is zip heat shrink, that can fit on a cable without sliding.
What a world! :D
yavv kolev It may exist (good info!), but your boss probably wants you to follow the company workinstructions :-)
Can't believe I watched that whole video.. and enjoyed it. How did I end up here anyway?
This is true, but it might be more of a sales pitch. There are lots of manufacturers of cable joints so they were probably demonstrating how there joints are done. Compared to say a raychem, sicame or tyco joint. Someone might see this and say that's quicker than the joints they use. Or it might be a training video for apprentices.
+John Bobrek they did get the bad guy and send him to jail :)
And can you believe, that this guy gets paid only in tips!
That's why the women become dancers.
It’s funny you said that John Borneo as I was thinking the same thing!! Haha! I’m in the electrical industry so naturally, I was mesmerized ✌️🤓
Same here
im just here soldering 12v dc connections
😄😄😄😄
😂😂😂😂
hope you are using heat shrink :P
@@Lewdacris916 or at least heat sleeves :D
Heavy Duty 12v DC connections xD
Diese Montage in der Nacht bei strömenden Regen unterm Zelt, da fängt der Spass erst an......
Oh god , this takes me back to watching AEP safety videos , those guys are always working in a perfectly dug out ditch with no mud or water , rubber blankets everywhere with plenty of wipes , 🤭😂🤣😂 that never happened for me at any point in my career. Still kept the power on for people tho 👍🏾 , people are always happy to see the power guy as long as he is there to turn you back On and not Off .
Some day, I'll be out drinking and the power will go out. That's when the skills I learned today will come in handy.
Синей изолентой сверху забыл.
I won't even be doing something even close to this big ever so I dunno why I watched but it was fun! Best job I ever seen done !
And I thought I was a hero when I repaired the end of a garden hose this weekend...
😆😆😆
Love to see this done in a howling gale and lashing rain ! . Its a big boys version of what I would do on a mains cable
You wouldn't do it in those condition, you'd set up a tent or worst case wait for better weather.
@@mfx1 I'm sure that's what he meant... with a tent. But howling gale and lashing rain would still be happening and making the work difficult.
Very amazing tbh, did not think its so complicated. Alot of work going into this :)
Bravo pour l'électricien qui a raccordé cet câble 👍
me when I'm trying to glue my headphone wires back together.
lol
This is how engineers imagine it's done in the field
How does it actually work in the rain and mud?
@@MrKristyon pretty badly
Try doing it without all those special tools, just a utility knife and a tape measure.
We were replacing a five kv line at a veterans hospital that shorted out, we worked about 30 hours strait, half of it in the rain, I made up one end, another guy made up the other end in a vault underground, I guess he was too tired, we turned it on, and it blew the man hole cover about 50' in the air, so I had to do his splice all over, it held the next time we turned it on, that was a bitch.
@@MrKristyon Yes. In the field they build a tent first.
20mins per joint - this video proves it
Love watching these types of videos. It is an art to be able to do this kind of work cleanly and precisely.
One of the coziest video in my collection. Often watching it before sleep
I so enjoy watching nonfiction videos.
So two really big wire nuts are out of the question, I'd imagine !
With 4.6m views and 20K likes it's fair to say that nobody was looking for this but everybody needed.
Look at that work man looks flawless
I dont have the slightest idea what any of this video is about. OR why I watched the entire thing completely mesmerized.
+Michael Stevens (LeFevre) its the music
+Michael Stevens Same, check out High voltage cable termination vids, its like porn i dont get it, but its So Good.
@@MrSheaonemillion is this a new trend, like watching ASMR?
@@DavidG2P if it is I wouldn't know, i have never known what's cool or trending.
I was waiting for him to pull out a huge heat gun lol. I use a lighter to melt my shrink wrap, his was a little larger.
Extremely Excellent
You proved, Practice makes a man perfect.
*pulls out massive soldering iron* I've got this guys!
15 watts is massive, right?
На стенде конечно хорошо, а посадить этого спеца в канаву, где по щиколотку воды со снегом, сверху дождик. Если наращивал, один вопрос, а если ремонт обрыва - где маркировка фаз?
I was a retired electrician too and experienced high voltage cable splicing ,it's very delicate and complicated steps to follow to perform this job .
I love these (pre- Internet) VHS videos demos.
This is really nice work. Too bad no one spends the time to do this.
My first boss fired me the first day.
He said I did really great work, and that he never needed to worry if my connection would hold.
He said he never needed to worry about the inspector finding something wrong with my work
But he told me he would be out of business if he kept people like me.
I took way to long, because I did all the steps and did it right.
He had guys that just used butt connectors from home Depot and some 99 cent electric tape
True story
Sorry to hear this. It is true that people are greedy.
What was the application?
There is a engineering quote that says, sometimes good enough is best.
Granted, I believe those decisions should be left up to the engineer
@@michaelbarnhill2685 yes this aplikation .. Naturlich ha ha ha ha ha ha ha . ho ho ho ho ho ho.
If your boss was a high-voltage lines contractor and fired you for the reasons you mention, he should have his license revoked. I imagine his luck was holding up around the time he fired you and had not killed anyone yet from negligence.
@@frankieromnimon5898 at the time I was fired he had not had any fires yet
A few years later he had his first, then his second.
I moved out of the area and don't know if any more happened
I know several buyers had issues with outlets and switches and lights not working and had repairs done.
How the fuck this be in my recommend video
All I did was watch one soldering video, now my recommended page is full of videos like this... Damn that new youtube algorithm
danish
Terang Soco limeys catching up on how to handle high voltage cables.
He's dressed up in a cute little suit to perform this exercise. In the US, the electricians would have done this in 2 minutes.
go learn english!
I was a 52E in the Army and doing this was part of the duty description. This is slow, tedious work and made even worse, far worse in the field. Great video guys! 🤙
I love all things electrical with a passion and this here is an artwork of beauty! Well done and congrats.
I've got these as my speaker cables
+Voima
More importantly, did you use cable elevators to elevate the cables off the ground as not to cause interference and static buildup? Did you break in your wires for 96 hours? Are you using oxygen free copper? lol
@@pmgodfrey lol
Obviously this will be a lot different when you're doing it on the field.
you will want to make sure you have all the correct heat shrinks on before you make the first Connection.
Great Video Thorne Derrick! We are going to embed on an informational post for our 250 KCMIL through 6000 KCMIL High Voltage Cable. Good info!
I wished I would have went to the Johnny Horizon school for doing some gnarly shrink wrap jobs. Awesome job!!
Imagine completing a splice and realizing you forgot to slide the shrink wrap on beforehand.
if you are doing it without reading the procedure, then sure :p most people don't like to read procedures, so they usually fuck up.
Procedures are for newbs when you've been doing this stuff for years. Personally I would like a second person with me doing this double checking every step as we go.
Md Razi Shaikh
"Procedures are for newbs", he said, knowing nothing of science or epistemology.
Who, me?
Here we are again by youtube recommendation.
super amazing after 7 years!
Love this video most I work with was 440VAC . Be safe out there .
I just realized, I watched this for 19 minutes..
Excellent video!
mire la miniatura y entre y no pude dejar de mirarlo jajajajajajaja y si es un byuen video
Informative. Useful. Calming. Inspiring. Life-changing. Enjoyable. Heart-warming. Other.
this job is highly skilled its my job at Bechtel Intl. terminator and splicer of medium voltage XLPE and EPT up to 33kv and also tapping of rubberized tape 33kv 17 kv 11kv 5 kv in omam and Africa.
Here hold my beer.... I can solder it together with my mighty Yihua.
I should to that to my speaker wires. That would make them cat-proof, I hope.
i used to do this with cotton tape and linsead oil and lead plumbing joints 30 years ago
Interesting to see heatshrink used. In London EDF (UK Power) Networks they encased everything in a potted resin.
watch out men, there are two snipers
@Eìon O'hInneirghe You must be really fun at parties bud.
@Eìon O'hInneirghe
Tosser.
I don't know man... Seems like a Lotta work
Not something I'd want to be doing in a hole in Minnesota in January during a nice sleet storm. Gives me goose bumps just thinking about it.
Mufa zrobiona idealnie!
Piekne wykonanie!
Pozdrawiam :)
Sama jesteś Mufa
GOOD VIDEO....LEARNT ALOT
ENGIYAH VIDEOS
What an amazingly intricate process. I never would have imagined. I wonder how much one of these splice kits costs.
1 new Toyota Camary.
a joining kit for 12kV cables with 3 phases costs about €400. For 24kV cable it's about €1000.
Excelente trabajo me encantó me hace acordar hacé años atrás que también hise esos empalme de medía tención en los pórticos del puerto de exolgan en Buenos Aires lleva tiempo paciencia y muchas concentración y atención a lo que se está haciendo ya que es un trabajo de precisión y muy peligroso por las cargas que manejan eso cables y sobre todo con la humedad felicitaciones colega
10/10
Nice professional work.
как всегда: хуяк, и забыл одеть последнюю термоусадку :D
классика))
👍👍👍😅😅😅
"All traces of carbon must be removed from the insulation"
*Blasts yellow flamed burner at the insulation, filling it with soot*
Why doesn't he use a heat gun?
@@smith549371 Maybe there is a power failure.
@@mk23909 you can use gas heat guns also, theres no need for flame. Most people would consider a flame unprofessional or amateur.
@@smith549371😉
Open flame torches are most commonly used actually and standard practice in the trade. Much quicker and far easier, but yes U could use a heat gun if U really wanted too
THIS IS ART!
Work of art , to think guys are doing this in a hole in the ground in all weather, amazing 👏👏👏
I'm glad they included part 7756-WQ-4411 electrical cleaning tissues. My kit was missing them. Awaiting shipment from customer service.
Why is the copper screening braid double-layered over half the joint, then open-wound over the remainder? Did they run out of braid half way through the job?
nlo114 Hi, no nothing ran out. The mesh is to pick up surface current and as long as its in contact with the insulation/conductive tubes, the semi-con layer on the cores and back to earth, that is all that is needed. Has been tested too so we know its fine.
If is done that way for conduct the transceiver calibration support to its optimum performance.
Изолента не синяя, работать не будет
This will come handy next time I repair a 11kV 3 Core XLPE & EPR High Voltage Cable.
One electrifying performance.
no one:
not a single soul:
yt algorithm during pandemic: wanna watch this guy join 2 wires?
WAGO do something, please! ;)
LOL
Must admit that was great to watch
One time i got an almost brand new 50 foot extension cord someone put out for garbage. It had been cut (with a lawnmore I'd guesss) and repaired. The guy stripped the insularion, and wound the wires together really tight but left them all bare and just wrapped it with scotch tape, then duct tape. he DIDN'T insulate them from each other!.
He obviously didn't watch this video, like we all did! :) LOL
Nice work at starting video but in last I'm confused how can we put two round heat shrink tube in already jointed wires 🤣🤣🤣
He put them on at the very beginning
@@michaelstewart9308 check his video at beginning
@@michaelstewart9308 check at 17:43 he slide tube from sides because it open from sides if it is in field it would be a great mistake
This is exactly what I did when I tapped into a WestPenn power line to build my underground meth lab.
Unlimited power at my finger tips
Thanks algorithm, now I know something I'll 1000% never need to know.
Nice joint! Last thing I could read on shrink tube of the joint was "THC" before the speaker said the joint is complete. 😂
Well, it isn't a complete joint without any THC....
Beeping noise in the background as if this man is performing surgery on a human. Good job Sir!
I've probably watched this 30 times at least, only because it puts me straight to sleep
ASMR ! (google it)
Excellent, I am glad we can help you sleep better
Am a proud cable jointer
I wished I'd have had one of those sheave tools when I was terminating armoured cables, beats a Stanley knife hands down!!
9:44 "...all carbon traces must be removed from the primary insulation" but once he is done of that he marks it with a yellow grease marker.
+David Hughes And shrinks it with a yellow flame that is probably putting soot (Carbon) all over the place...
+Toby Sinclair-Bell Good call on the yellow flame, the red mastic should not protrude beyond the first shrinks, it needs a wad of red mastic between the three conductors at each end and the gray silicone tape is not for a pressure seal between layers it's for gap filling, so the last lap seal needs to be the red mastic, and how did he run out of the aluminum gauze and not finish the half lap covering? Oops
It's already over engineered by the insurance company... Because writing up new SOP's out of blood, tends to cause more issues than doing it right the first time.
Next on How It's Made...
You mom and dad's vibrator, power supply cable.
That's the right size of cables that i need for my headphones amigo
+Toby Sinclair-Bell Good call on the yellow flame, the red mastic should not protrude beyond the first shrinks, it needs a wad of red mastic between the three conductors at each end and the gray silicone tape is not for a pressure seal between layers it's for gap filling, so the last lap seal needs to be the red mastic, and how did he run out of the aluminum gauze and not finish the half lap covering? Oops
Next up Electro booms does a 11kv splice lol
its all very well in a lab, but as I know, its very different outside in a trench.
The bgm and the voice make this video look more intense it's like a doctor doing surgery😁
Btw I love it
I am also 220, 400kV jointer. Excellent work. Good teaching
Thanks for watching!
did someone leave a tap running in the background
That's perfect for speaker cable. Lol
Perfect joined termination
OK, this looks easy. No problem. I am now ready to splice high voltage cable.
Doing his in the field not quite so easy lol
I did something similar in a shack in Trinidad and Tobago. Dirt floors and no lights :P
и нахуя я это в 2 часа ночи смотрю.
А я почти в 5 утра )
Nice presentation sir... In real that is not easy as we saw.. Here in KSA we are now using 3X500mm2Al for 15kV. Way bigger. So we need efforts in doing cable joints... Thanks for the additional knowledge☺
500mm😳 the biggest I’ve worked with is 300mm on EHV, and that was a work out
Wow! These guys must get paid big bucks! That's some complicated work!