Hyundai i30 2007 fix repair not working folding mirror.
ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2016
- Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
In this video I take you through the process of repair a non working folding mirror on the above car.
The folding mirror motor was constantly running, in the video I show you the reason why.
I managed to fix it without any new parts, just by repairing the broken ones...
I do apologise for my voice, was bit rough due to my sore throat...
Hope you enjoy the video.
Any questions please put them below.
Like always, thank you for watching! - ยานยนต์และพาหนะ
👍I just did the same thing on my i40 (what a pain to take apart) but instead of using wire I used nylon tubing heated and pushed in and cut to size. In the recess side of the gear I bent a paper clip round to the circumference as the gear so it fit in the recess just like a ring, heated the ring till it got hot and pushed it into the recess of the gear, then I filled the recess with bicarbonate of soda and then added the super glue to the bicarb. I also drilled out the center so it is not so tight and use two part epoxy. It worked well.
Super glue alone is not strong enough for moving parts or really thin stuff, adding bicarb to fill in the gaps and to reinforce makes it stronger and it can be filled to make it neat.
I did like your method of use the wire, I just did think of it at the time.
Thanks
☺️
Nice approach as well!
👍👍👍
Thanku so much - absolute life saver! no auto electricians open this time of year - your video really helped me thanks🙏🙏🙏🌞
😊
👍👍
I need a video on how to open up the side mirror to get to the broken part
Me too
Me three
Yes exactly- video is pointless without showing that
And I thought I left out the easy part...🤔🙄🤦♂️
Next time I have one, I will show the ABC of things...
👍👍👍
@@LMAutoRepairs Me Four
The passenger side mirror on my 2010 Hyundai YF i45 Elite sedan will only fold in part way - Thanks for the video, as my problem may be a broken gear, so I will strip the mirror and try to repair it.
☺️
👍👍👍
Nice job. For the filling you can use epoxy glue ,but wash the grease out complete and after mounting it back don't forget to lubricate with Lithium grease. Thanks A LOT TEAM.
Dhi REN
Thanks!
👍👍👍
Very good idea, thanks for sharing...I´ll try this with my side mirror.
Jorge Guillen
Hi
Thank you for watching!
Hi! Could you advice, what side mirrors to look to have folding option (how many Pins are needed) ? I have side mirrors with heating and automatic adjusting, but i would like to repleace it to have all three options installed.
One more question - do I need to change eletric cable that is now plugged to my mirrors and fuses? Or should they be able to handle additional function ? ( + folding). Thanks for help!
Thanks man.. was helpful for my i20
kiran awc
Great!
Thank you for watching!
Think you very much 😍
Is this mirror control circuit control mirror on current base?
Great job!
Thanks!
👍👍👍
can this part work on Hyundai mirrors
Thank you.
👍👍👍
How to disassemble that mirror ?
You can find a new part at Ebay or Amazon just look for
"Wing Side Mirror Repair Metal Gear Left Right for Hyundai i30"
Thanks!
Awesome work.....👌👌👌👌
Thanks!
👍👍👍
Epoxy Glue is much stronger for plastic, is not brittle like superglue
Saso Kuzmanov
Hi
Thank you for watching and for your comment!
That's absolutely correct... but unfortunately I didn't have any at the time... I have now... lol
Thank you 😁
😊
👍👍👍
Hi,Thanks for this video. I have come across the same problem. You have given only lecture for fixing the plastic wheel firmly on metallic spindle cum gear using some glue /epoxy. I will appreciate if you can make a step by step complete and actual video showing fixing of slipped plastic wheel on spindle with naming the fixing materials used. It will be very useful for all of those who have the same problem because this gear isn't available as a spare part in the market /companies. For this reason the only alternative left is to go for new side view mirror.
Sir please you make video on making simple mirror to folding mirror
you are best
😊
Thank you!
magnificent
😊
Thank you!
👍👍👍
Another good video. Would you hv any idea if the Mercedes E-280 cdi, mirrors work on the same principal !! Greetings from Brighton. If you ever in the area. Have coffee on me !!
Colin Aglae
Thank you!
I never opened the ones on the e class... Sorry...
hi i have the same problem in my car kia optima i fixed the mirror in same way instead of putting wire i used small ring from small pipe but the mirror worked for some time and then this part broken again badly and can not fix so i make a mold of silicon and put a material in this mold and i have a copy from this broken part but it is fail after a period because of the internal hole it is not fixed correctly on the shaft by the way when this part is broken the folding motor still continuously running because this motor stopping depending on the current drawing by motor when it reaches the limit it will blocked and draw more current then the electronic circuit will disconnect the motor
Mark Mark66
Hi
Thank you for watching and for your comment...
The way things are made nowadays are not to be fixed, but replaced instead...
So, any successful repair on one of this parts it is a win...
Good you managed to get it fixed... hope you can figure out how to do it again...
I have exactly the same glitch on both sides. Do you have a video tutorial on how to disassemble properly ??
No, I don't...
Sorry...
Thank you for watching!
Rats! What I wanted to see was how you opened the mirror housing to repair it, but you didn't show that.
Richard Shelton
Sorry... if I recall correctly, you pull the mirror out, and behind you find some screws that then allow you to remove the cover etc...
Thank you for watching anyway...
@@LMAutoRepairs Can you please make a video on how do you open it? My car is Kia Forte 2011 but I believe the mechanism is the same
@@Am-gm4uy
Next time I have one...
Thank you for watching!
@@LMAutoRepairs Great! Thanks mate
I have a question about whether the side mirrors of the car are still working
جعفر الحايكي
Hi
What do you mean?
Thank you for watching!
Can I just disable the mirror by unplugging the socket from the mirror, is it ok to do so,I know it will disable the blinker too, but if I don’t mind that. Thanks
Bcoz I want to stop the motor going constantly
Should stop it indeed...
👍👍👍
Hi, what kind of grease can be used for lubricating those combination of plastic and metal gears? Can i use xy-2 grease or white lithium grease?
raga N
Hi
I use white lithium...
Thank you for watching...
lmsvvavr Thank You....
Hello. How did you get to the gear section? for the power windows?
Also, what did you use to keep the gears properly lubricated?
The design for this is almost the same as my 2012 elantra md..but I cant get the motor out..any clues?
Dear you go to the ali express online shop there are all types of spares available
how do i take the mirror off lol
can I drive the car without the fuse that was removed as I am not able to fix the mirror motor myself
Chandra Beukes
Hi
I can't really remember from the top of my head if that fuse feeds anything else crucial to drive the car... I think you are going to need to try... Sorry...
Jak nazywa się metalowa łapa która trzyma lusterka . Mocowana do drzwi?
Hi. have a similar problem with my car. Can you describe on how dismantled the mirror so as to gain access to motor
Hi
Just pull the mirror out...
It is hold by clips... then is all screws...
hi.managed to get the mirror out.but stuck @removing the actuator.as I see there is no way to remove the wires from actuator...looks like I have unplug the wires from connector which plugs into another in the door.is that how u did? if so how do I unplug the wires from connector.appreciate ur advise
VijayKumar BV
Remove the triangular shape plastic cover inside, opposite to the mirror...
In there you will find the plug...
Minute 9:00 on the video...
hi. would it possible to show the disassembly video or step by step instructions
It would, but will have to leave it for the next time I have one of this cars...
Sorry if can not help you at the moment...
Thanks for the reply. Can you just guide me on how to remove the cover at the bottom of the mirror assembly. This cover seems to have screws that anchor the mirror to the car frame.
Right, if I do remember correctly, after the mirror removed you will see a few screws around the motors and mechanism that adjusts the mirror... some of those screws are holding the cover...
Hope I am not mistaken with some other one....
Next time I do a similar job, will definitely go bit more into detail...
I need the same info. I have an i20/..imagine it's similar
The main problem, where we can purchase the gear, if gears are not available, what is the benefit of this video, no one can take the benefit, Also you have to mention the price of the gears.
The benefit is that you can repair it...
Though was obvious...🤔
You can search for the gears in places like eBay, the price will show there...
Not sure what else you else you expected me to do... or have done...
Thank you for watching!
Please watching to how to open mirror and how to ripyrin full video
Arvind Rathor
Hi
I am sorry, at the time I have skipped what I thought would be things that were not important to show...
I now realized that I should have not done it...
I take that into my future videos...
Thank you for watching and for your comment!
👌👌👍👍👍👍👍
Rupak Sen
Thank you for watching!
is there a tool to remove the spring?
Not sure...
I never used anything special...
Thank you for watching!
How can I purchase this gear
Look on eBay...
Thank you for watching!
Does anyone knows the correct part no of that part?
Hi
rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FWing-Side-Mirror-Repair-Metal-Gear-Left-Right-for-Hyundai-i30-Chevrolet-Captiva%2F223073991156%3Fhash%3Ditem33f03ef9f4%3Ag%3ADRMAAOSwLMtbVyi3&campid=5338344466&toolid=20008
Hope that helps.
Thank you for watching!
Where can i get this type of gear of power mirror?
Priti Patel
Not a clue... I never researched that... sorry...
Thank you for watching!
As per my findings, gears are not available as spare parts in the company. Either go for new mirror or repair the gear somehow.
www.ebay.de/itm/224372211038
I have same problem with my I-20 😔😔😔
Sorry to hear that...
Hope you can get it sorted.
Thank you for watching and for your comment!
if replace the gear
www.brossautoparts.net/index.php?route=product/product&product_id=6342..
Should also work...
3d printer
Indeed!
Thank you for watching!