Dear sir, Could you please tell to me what is the shear strength of silver and gold...i checked wuth online so there displayed zero ..is it correct ?? If it zero what i have to do...am waiting your good answer Thank
Please make a video on "Selection of Material and its Hardness(HRC) for Die Components( Top/Base Plate, Back Plate, Stripper Plate, Punch, Die, and other insert( guide rail etc. used in dies)".
sir die back plate should be soft, so that whenever force gets transmitted from die, it should destroy die back plate and not die plate.mild steel is perfectly okay to use here what i think
When die is in closed condition, punch length should be extend land of the die block by 1 - 2 mm. I will plan to make video especially on Punch length soon
Well explained.Really thankfull for all your press tool playlist
Best explanation...superb...thanks a lot..
Sir I want please you meke video on press tool subject with drawing a job
okay will make it soon
Thanks for your efforts. The video was great.
good efforts pajii well explained !!!!!
Very informative sir thankyu 👐
Dear sir,
Could you please tell to me what is the shear strength of silver and gold...i checked wuth online so there displayed zero ..is it correct ?? If it zero what i have to do...am waiting your good answer
Thank
Gold - 227 mpa
Silver - 20 mpa
Good
Please make a video on "Selection of Material and its Hardness(HRC) for Die Components( Top/Base Plate, Back Plate, Stripper Plate, Punch, Die, and other insert( guide rail etc. used in dies)".
pankaj please see this video, if it is helpful to you
th-cam.com/video/h9fMYQfKsGo/w-d-xo.html
Most useful video..
Thank you sir
Could you please tell me what to do when the die plate cavity has been filed more than required amount?
Sir aap se query krni hai press tool design drawings subject se related information...kuch puchna hai...
Which course tool designer plz tell me
why you using mild steel for die back plate material . is it ok ? we using ohns grade. if you using mild steel is not correct for tool life .
sir die back plate should be soft, so that whenever force gets transmitted from die, it should destroy die back plate and not die plate.mild steel is perfectly okay to use here what i think
sir, how to decide the length of a punch, kindly explain
When die is in closed condition, punch length should be extend land of the die block by 1 - 2 mm. I will plan to make video especially on Punch length soon
than you very much sir for the reply
Sir, kindly confirm how much size we consider die plate length and breadth from the part dimensions
We have to clamp die plate to bottom plate, so allen bolt head should have 1D wall on all sides…. And minimum 10 mm wall thickness for cutting edge…
How to learn fastener tool design (Bolt and Nut)
Sir where I got full lecture on press tool and fixture design ,please sir give the idea
th-cam.com/video/S2YRaznq_Rk/w-d-xo.html
Thanks for yours videos but "unit of conversation is quite confusing"
What about small press tools and plastic die...can you explain sir
th-cam.com/video/S2YRaznq_Rk/w-d-xo.html
Sir please make video on taper and misfeed sensor
please give some example on this
sir can you teching me lock washer design
th-cam.com/video/S2YRaznq_Rk/w-d-xo.html
Yes I can
Thanks a lot sir
How to in cm ? Shear force bcz unit is NM ???
I want to learn tool design.. can anyone give me some suggestions
th-cam.com/video/S2YRaznq_Rk/w-d-xo.html
yes let me what do you want to learn. i can give you online coaching for the same
Sir how to choose the plate thickness
th-cam.com/video/S2YRaznq_Rk/w-d-xo.html
Thanks sir ji
Paji english ki partics kr rhe hai
ਸਰ ਪੰਜਾਬੀ ਦੇ ਵਿੱਚ ਵੀ ਸਮਝਾਇਆ ਕਰੋ
Sainath
Sir aapna contact no send krna sir....
It is 2.15 mm not cm
sir ye video hindi mai banao please
Will try to make it
@@machinetooldesign1517 please jarur try kro