Thank you so much for sharing! Do you know what's the reason for miscutting in my bottom area of the page? The top and center parts have always been cut accurately, just the bottom part always off. Did it happen to you as well? Thank you!
This is the same thing happening to me too. I have updated the software & firmware, restarted everything but it's just the bottom right that cuts too far up
@@ladyprintboss so I don’t need to return my cameo yet? I’m getting really frustrated right now because I “fixed” everything the shop said but it’s still not cutting right when it cuts lower on the page
A couple of pointers that hopefully may help others 1. Make the registration marks as thick as silhouette studio will allow 2. Make sure your right most roller is not actually over the sticky portion of your cutting mat and 'catching' on the stickiness :'(
i think my calibration is just fine but the distance adjustment is kind of way off. no matter how i adjust the slider in the silhouette studio, the cut lines stays at the exact same place. do you have any idea how to fix that?
I’ve followed all the tips in all the TH-cam videos I’ve found, but my machine always either has a registration error or cuts 1cm off, does anyone have any ideas for what I should do? I’ve calibrated the machine many times as well.
Hi. This has got to be the most under watched, brilliant videos I have seen for the Cameo 4. Well done and thank you. You have saved me hours of frustration.
i changed the distance of the cailbration, but it didn't do anything. Mine cuts right next to the black line, but when I print and cut it's of by about half a centimer on the bottom.
@@altagraciatuma3144 I changed the calibration numbers until it cut right. If it cut to much to the right I adjusted the left side if that makes sense.
Hi, thank you for sharing this video. After calibrating perfectly and exiting the page to proceed with the actual print and cut, the cut lines are still off. How can I fix this issue?
Oh wow, sorry to hear that. If you are still off after calibation I would check and make sure the rollers are not slipping. Then I would add a offset to the outer edges of my design matching the color to the garment I am pressing on. This way if you are a bit off there is no white showing. Hope this helps
@@ladyprintboss I'm printing it on regular white copy paper and its not covering the corner sections too. Tried cutting close to 100 sheets considering all the comments and information shared online :( Not sure what I'm missing.
Thank you so much for this tutorial. What size cardstock must be used to print the calibration sheet? I printed on A4 letter cardstock and it cut off at 6 of the calibration crosses. The only thing I can think of is that I need a longer sheet of cardstock to print all 8 of the crosses.
Hello! I have a huge problem where the cut will sometimes be 0.5 to 1mm off to the right or to the left randomly, and sometimes it’s perfectly centered. The calibration is perfectly centered and the lenght of the line too.
the problem i got is tahta diagonal lines don't get cut straight but kinda shaky, i need to know if someone know why .. and how to fix it ... thank you in advance
@@amana.studio oh, yes! Idk why bit it worked. In options there is a field for package size or something like this. It had do be sized down to 500mb. 2000mb could also work bit 500 magically did it for me. It's not always a 100% correct but WAY better!
Thank you so much for this step by step tutorial for a beginner like me. I have bookmarked it for future use if necessary and recommend other new users to do the same. I also respect someone that cares about their work and does their absolute best to make it perfect as you stated. This let's me know that the instructions you are given will be correct.
I have a MacBook Pro when I try to right click nothing happens for me. I’ve tried several times I wonder why I can’t get it work on my MacBook. My print and cut is a hot mess.
I have had nothing but problems with this expensive machine since I bought it. I have only had it for 3 months and haven't been able to cut anything yet. I bought it because I was fed up with Cricut but it seems like I jumped out of the fire and into the frying pan. I have a call scheduled this Monday. Hopefully that will help.
@@ladyprintboss no. I was trying to print the tags themselves with no words. After much cussing AND prayer, I finally got it to print 🤦🏽♀️ and found your channel through all of it.
I have had my machine since November 2020 and have not been able to anything. I tried several test cuts and it cuts to the far left on the edge of the mat. Not impressed with Silhouette support…I just want to talk to someone!!!
Could it be the image itself ? Have you tried different images? I know that if the resolution on the image is low the edge of the image will be pixelated and you'll need to put a inside contour on it or put the color of the shirt that you're going to do as a outside contour so that the cutting doesn't get off It's like a bleed. You also may need to calibrate your cutter and I know people ask why if it's new but sometimes you still need to calibrate it because it may not have been calibrated properly coming from the factory or something could happen in it being you know moved around
Hello, the machine stopped midway while performing the calibration process. Does anyone know how to restart the machine in order to continue the process?
I think I misunderstood your instruction of lining it up. You're meant to line the blade up within that green box that shows in the scree but isn't printed on the paper. Otherwise your video was most helpful! Thank you!
Mine fails to register anything no matter what and i was trying to calibrate because when it finally cut, it cut so off. It cut to the left and diagonal. The cameo 4 will not cut the calibration cuts AT ALL. I can't find any info on this.
Hi Vanessa, thanks for commenting. I have a video on how to make your cameo register the job. Your issue may be as simple as you not using you not placing the optical eye in the right position. Take a close look at the video I am linking and you will see the correct position that the cameo needs to be in to register the job. I hope you are a subscriber and if that video helps please make sure you hit that like butoon, also drop me a comment on the video if it helps or if not and I will try to come up with other options for you. Good Luck th-cam.com/video/DD4gr467Nn0/w-d-xo.html
Hi!! My machine cuts on the black lines and the distance adjustment is perfectly at 20cm but my machine is still not cutting where it’s supposed to cut...what else can I do to make sure it cuts right? 😭
@@simplywaffles7269 mine has this exact problem! I cannot figure out how to fix it for the life of me! The lines and distance were perfect, but the cuts are nowhere near the "A" "B" "1" or "2" markers. Did you find a fix?
@@lyndsieroche776 hiiii!!!! it's frustrating right?? yeah i'd eventually saved it as pdf instead and then only cut it using the silhouette studio. the print and cut option is not working for me at all. you should try! do tell me if it works for you too! good luck!
I've been using mine for a year. Now 80% of the time it cuts below the images and crooked and I cannot figure out what it is. I've reset the blade position, replaced the blades, tried new mats. Very frustrating and tons of wasted material.
If you have done the recalibration and checked the roller wheels it's possible you just have a bad machine. I would create outside contours in the color of the shirt to accommodate for the miscuts
I need help! I'm doing print and cut stickers. Just regular circles. It will cut perfect circles on regular matte sticker paper. But the moment I try to cut on glossy sticker paper or laminated paper, my cuts are completely off and then they are coming out ovals instead.
Sounds like the paper is slipping. I am assuming you are not using a mat and if you are your image is not sprayed down to the mat so it doesn't move. You may also need to adjust your cut settings for the glossy paper. Hope this helps.
I am unsure if you will see this, I want to make sure I am doing this correctly as my cameo is not cutting correctly. When lining up where to calibrate, I want it somewhere in the general area of the green square correct? Or does it need to be in a certain spot? I did line it up in the general area of the green square, but my cameo never cut my paper to verify I was correct. It also shows .25 on the bottom right.
Hi I have a question that cannot be solved maybe you can help me 😭 So I need to cut these blue circles with no offset border, just round blue circles. But it always cuts on some of them off, so on the sticker I can see a bit of the white background paper. I tried calibration but it was pretty much on the crosses and also the distance was exactly at 20cm. I noticed that this inaccurancy is mostly in the upper half and on each of them less or more severe some of them turn out perfectly. I cut in good lighting, chose the right paper size and place it perfectly on the mat. Of course there are ways to get these circles but I am just frustrated knowing my machine is cutting off ;( I use epson printer on highest quality also have the latest version of silhouette studio…. Thanks😞❤️
Hi ! I hope you can help me or give me an idea maybe im doing something wrong. Ive been doing all these steps and for some reason my machine just moves when i hit calibrate but doesnt cut or do anything to the paper its self. Its been cutting completely off and flying off the matt on cardstock and vinyl i cant seem to get any help on silhouette. Thank you in advance !
@@ladyprintboss thank you for getting back to me! Yes I'm sure ! It moves for a slight second then it stops it doesn't even try to read the marks at all.
@@nellyocasio1653 I figured out what I was doing wrong lol. I was placing the square that's between blade 1 and blade 2 on the top left of the cross instead of placing blade 1 🤦🏻♀️. As soon as I noticed what I was doing and actually placed blade 1 where it's supposed to be, it worked! Maybe that's what you're also doing wrong?
I would help to know what the beginning issue is. As a beginner, I have no idea what your machine was doing which caused it to need calibration. I hope that makes sense. Thank you for taking the time to make this video. 😊
Sometimes you get a machine in the machine is just off and you have to calibrate it other times you may have printed on it for a while and it gets off It's just like a car things come loose . it just happens
Does anyone know how to do an isolation calibration? For some reason, I can get the A-B set up perfectly, but I can't get the distance 1-2 set up at all. Even with adjusting the MM, its off almost by 1/4 inch. And when I try to recalibrate it making the mm adjustments, it doesn't seem to want to move to the right spot? I am not sure what I am doing wrong.
OMG!!!!! HELP!!!!!!!! I tried to calibrate my cameo 3 following your instructions and now my cameo is totally screwed up. It was just slightly off now it's completely off. I can't even use it at this point. It never followed the "+'s" in the first step. It made "x's" instead. Now I can't get rid of the calibration print page. Every time I attempt to print now all I get is that darn calibration page. I don't understand this at all, I did nothing different than what you did on screen. Can someone please help me. I have orders and I can't just buy a new cameo at this time. PLEASE HELP!!!!!!!
@@Esckelson0187 hey i was actually able to fix mines, what i do now is open the file through the silhouete application and i leave the bottom registration alone and dont move it but i can expand the rest of the marks with no problem
this is something that I help my channel members with. If you would like for me to go live and help you consider a channel membership. the Rising boss and above memers are able to request live video help
The cut is very hard to see. I will try my best to do another video in this but I do have a video teaching how to do a contour so that you can get a perfect cut
I feel so dumb lol I went ahead started all over and then I noticed I have been placing that white square piece in the green square instead of the needle part lol
I'm trying to adjust the distance and it doesn't cut anywhere on the A or B lines so I can't see it. Then if I could see it, I wouldn't know how to adjust it.
Hi, my cameo will not cut anything over 2 inches down. is there any way i can fix this issue. the cameo will cut anything and everything under 2 inches. please help!!! the cameo will cut across
@@ladyprintboss where is page settings? I’m trying to cut designs under 2 inches and it just cuts either too much to the side or too much on top and like how you mentioned in the video white appears on my cut design
Oh, sorry you were not able to follow 😪 definitely a work on progress. I do realize that what I find simple is difficult for others to understand, I am working on that.
I am sorry you found it difficult. Calibration isn't the easiest thing to do and definitely even harder when trying to fix a machine while filming. My videos are not planned and not staged. I just do my best with what I have. It's not always the easy fore to get the best angles to show things since I don't have anyone filming. I know the silhouette store has a video on the same thing.aybe try that one or if it's something you would like to ask here, I happy to try to help out
@@dorrineconrad9128 yes it cuts but the cut is very small I had to get a magnifying glass just to see it. Look closely and measure it from AB and CD. It may be off. I will go in and make a quick video update for you a bit later
Watch my newest video on how to get a perfect registration even if your cameo if off register th-cam.com/video/sqq4ULPvOac/w-d-xo.html
Thank you so much for sharing! Do you know what's the reason for miscutting in my bottom area of the page? The top and center parts have always been cut accurately, just the bottom part always off. Did it happen to you as well? Thank you!
This is the same thing happening to me too. I have updated the software & firmware, restarted everything but it's just the bottom right that cuts too far up
Hi. Have you guys found the solution for your problem? I have the same problem and still cannot figure out how to fix it 😭😭
You can adjust the bottom cut settings under calibration. I think I am going to create one more video in fixing this
@@ladyprintboss so I don’t need to return my cameo yet? I’m getting really frustrated right now because I “fixed” everything the shop said but it’s still not cutting right when it cuts lower on the page
Did you solve this? I have the same problem
A couple of pointers that hopefully may help others
1. Make the registration marks as thick as silhouette studio will allow
2. Make sure your right most roller is not actually over the sticky portion of your cutting mat and 'catching' on the stickiness :'(
Thanks 👍 great tips
i think my calibration is just fine but the distance adjustment is kind of way off. no matter how i adjust the slider in the silhouette studio, the cut lines stays at the exact same place. do you have any idea how to fix that?
Did you figured it out? I’m having the same problem too
yes wondering same thing
I have the same problem 😢 I've been waiting for a software update that will hopefully fix it or something 😢
Anyone got a solution?
Hey Mary, I plan to do a vido on this issue this weekend so keep an eye out. I very been super busy dealing with jobs
@@ladyprintboss Thank you for taking the time to reply :)
I’ve followed all the tips in all the TH-cam videos I’ve found, but my machine always either has a registration error or cuts 1cm off, does anyone have any ideas for what I should do? I’ve calibrated the machine many times as well.
Hi. This has got to be the most under watched, brilliant videos I have seen for the Cameo 4. Well done and thank you. You have saved me hours of frustration.
Thank you. Your comment made my day alot better
i changed the distance of the cailbration, but it didn't do anything. Mine cuts right next to the black line, but when I print and cut it's of by about half a centimer on the bottom.
I'm having this problem where u able to fix it?
@@altagraciatuma3144 I changed the calibration numbers until it cut right. If it cut to much to the right I adjusted the left side if that makes sense.
You are the only person to show how to do this step by step. THANK you so much!
Hi, thank you for sharing this video. After calibrating perfectly and exiting the page to proceed with the actual print and cut, the cut lines are still off. How can I fix this issue?
Oh wow, sorry to hear that. If you are still off after calibation I would check and make sure the rollers are not slipping. Then I would add a offset to the outer edges of my design matching the color to the garment I am pressing on. This way if you are a bit off there is no white showing. Hope this helps
@@ladyprintboss I'm printing it on regular white copy paper and its not covering the corner sections too. Tried cutting close to 100 sheets considering all the comments and information shared online :( Not sure what I'm missing.
When I adjust the ruler on calibrate it jumps automatically to -0.10 MM how where you able to move yours to 0.01 mm????
Type it in and watch this video to learn how to make perfect cuts
th-cam.com/video/sqq4ULPvOac/w-d-xo.html
Thank you so much for this tutorial. What size cardstock must be used to print the calibration sheet? I printed on A4 letter cardstock and it cut off at 6 of the calibration crosses. The only thing I can think of is that I need a longer sheet of cardstock to print all 8 of the crosses.
I printed on letter size
try to orientate to portrait instead of landscape
I dont have a printer. So i need to got and get some calibration sheets printed?
Hello! I have a huge problem where the cut will sometimes be 0.5 to 1mm off to the right or to the left randomly, and sometimes it’s perfectly centered. The calibration is perfectly centered and the lenght of the line too.
How to save the calibration settings? Coz once i closed the application and open it will reset to default
Hey there, what happens if its not even cutting the cross? 😢
THANK YOU This is the first calibration tutorial that actually made sense. MY HERO!
Thank you for the kind words
I have the original cameo silhouette, trying to decide if I should purchase new one. Is it more difficult to use?
What do you do when yours cuts diagonal lines across your entire page on the second row down?
Hello I am not understanding? Maybe try it again. I just posted an updated video on registering in Silhouette maybe that will help you
the problem i got is tahta diagonal lines don't get cut straight but kinda shaky, i need to know if someone know why .. and how to fix it ... thank you in advance
My Portrait 2 is calibrated but the cuts are randomly off. Is there another problem that could cause this?
Did you solve this?
@@amana.studio oh, yes! Idk why bit it worked. In options there is a field for package size or something like this. It had do be sized down to 500mb. 2000mb could also work bit 500 magically did it for me. It's not always a 100% correct but WAY better!
Thank you soo much so many videos said to put the sensor in the corner. You are a life saver
Hello my cut is fine just cuts a longer line on the left side what should I do?
Thank you so much for this step by step tutorial for a beginner like me. I have bookmarked it for future use if necessary and recommend other new users to do the same. I also respect someone that cares about their work and does their absolute best to make it perfect as you stated. This let's me know that the instructions you are given will be correct.
Thanks
I don’t understand the part about measuring. My machine is off and idk how to measure how much in order to adjust it
Hi, hopefully you are a subscriber. If so watch for a video on it. I will create one that explains it this week
I have a MacBook Pro when I try to right click nothing happens for me. I’ve tried several times I wonder why I can’t get it work on my MacBook. My print and cut is a hot mess.
Not sure
Minded the cross one but when I tried to do the straight line it cut out a big x
I have had nothing but problems with this expensive machine since I bought it. I have only had it for 3 months and haven't been able to cut anything yet. I bought it because I was fed up with Cricut but it seems like I jumped out of the fire and into the frying pan. I have a call scheduled this Monday. Hopefully that will help.
Are your trying to do a print in cut graphic?
@@ladyprintboss no. I was trying to print the tags themselves with no words.
After much cussing AND prayer, I finally got it to print 🤦🏽♀️ and found your channel through all of it.
I have had my machine since November 2020 and have not been able to anything. I tried several test cuts and it cuts to the far left on the edge of the mat. Not impressed with Silhouette support…I just want to talk to someone!!!
Ive got mine for just only 12 days and im so sick of it😡😭
Why would my machine cut perfect for small images and not for large cuts on the pro? Any ideas?
Could it be the image itself ? Have you tried different images? I know that if the resolution on the image is low the edge of the image will be pixelated and you'll need to put a inside contour on it or put the color of the shirt that you're going to do as a outside contour so that the cutting doesn't get off It's like a bleed. You also may need to calibrate your cutter and I know people ask why if it's new but sometimes you still need to calibrate it because it may not have been calibrated properly coming from the factory or something could happen in it being you know moved around
Hello, the machine stopped midway while performing the calibration process. Does anyone know how to restart the machine in order to continue the process?
Unplug it from the wall wait 5 minutes and plug it back it
I think I misunderstood your instruction of lining it up. You're meant to line the blade up within that green box that shows in the scree but isn't printed on the paper. Otherwise your video was most helpful! Thank you!
Mine fails to register anything no matter what and i was trying to calibrate because when it finally cut, it cut so off. It cut to the left and diagonal. The cameo 4 will not cut the calibration cuts AT ALL. I can't find any info on this.
Hi Vanessa, thanks for commenting. I have a video on how to make your cameo register the job. Your issue may be as simple as you not using you not placing the optical eye in the right position. Take a close look at the video I am linking and you will see the correct position that the cameo needs to be in to register the job. I hope you are a subscriber and if that video helps please make sure you hit that like butoon, also drop me a comment on the video if it helps or if not and I will try to come up with other options for you. Good Luck th-cam.com/video/DD4gr467Nn0/w-d-xo.html
is it has to be done in A4 Transfer paper or a Bond paper will do ?
You can use bond paper.
Hi!! My machine cuts on the black lines and the distance adjustment is perfectly at 20cm but my machine is still not cutting where it’s supposed to cut...what else can I do to make sure it cuts right? 😭
Did you measure the AB distance?
@@ladyprintboss omg thank you for replying! yes i did...everything is in order...yet the print and cut function is still giving me the same problem...
@@simplywaffles7269 mine has this exact problem! I cannot figure out how to fix it for the life of me! The lines and distance were perfect, but the cuts are nowhere near the "A" "B" "1" or "2" markers. Did you find a fix?
@@lyndsieroche776 hiiii!!!! it's frustrating right?? yeah i'd eventually saved it as pdf instead and then only cut it using the silhouette studio. the print and cut option is not working for me at all. you should try! do tell me if it works for you too! good luck!
I've been using mine for a year. Now 80% of the time it cuts below the images and crooked and I cannot figure out what it is. I've reset the blade position, replaced the blades, tried new mats. Very frustrating and tons of wasted material.
If you have done the recalibration and checked the roller wheels it's possible you just have a bad machine. I would create outside contours in the color of the shirt to accommodate for the miscuts
I need help! I'm doing print and cut stickers. Just regular circles. It will cut perfect circles on regular matte sticker paper. But the moment I try to cut on glossy sticker paper or laminated paper, my cuts are completely off and then they are coming out ovals instead.
Sounds like the paper is slipping. I am assuming you are not using a mat and if you are your image is not sprayed down to the mat so it doesn't move. You may also need to adjust your cut settings for the glossy paper. Hope this helps.
Mine still cuts wrong after doing this and everything seems to look fine...
I am unsure if you will see this, I want to make sure I am doing this correctly as my cameo is not cutting correctly. When lining up where to calibrate, I want it somewhere in the general area of the green square correct? Or does it need to be in a certain spot?
I did line it up in the general area of the green square, but my cameo never cut my paper to verify I was correct. It also shows .25 on the bottom right.
hello its been a long time let me take a look and get back to you
Hi I have a question that cannot be solved maybe you can help me 😭 So I need to cut these blue circles with no offset border, just round blue circles. But it always cuts on some of them off, so on the sticker I can see a bit of the white background paper. I tried calibration but it was pretty much on the crosses and also the distance was exactly at 20cm.
I noticed that this inaccurancy is mostly in the upper half and on each of them less or more severe some of them turn out perfectly.
I cut in good lighting, chose the right paper size and place it perfectly on the mat. Of course there are ways to get these circles but I am just frustrated knowing my machine is cutting off ;( I use epson printer on highest quality also have the latest version of silhouette studio…. Thanks😞❤️
Do an inset instead of an offset. A very small one and you should be fine
Watch this video and there is also a part 2 that you can watch-
th-cam.com/video/sqq4ULPvOac/w-d-xo.html
Hi ! I hope you can help me or give me an idea maybe im doing something wrong. Ive been doing all these steps and for some reason my machine just moves when i hit calibrate but doesnt cut or do anything to the paper its self. Its been cutting completely off and flying off the matt on cardstock and vinyl i cant seem to get any help on silhouette. Thank you in advance !
Are you sure it is not cutting. Does the needle act like it is cutting? It can be hard to see the cuts on there they are so small. Please check again
@@ladyprintboss thank you for getting back to me! Yes I'm sure ! It moves for a slight second then it stops it doesn't even try to read the marks at all.
Hi, did you fix your problem? Mine is doing the same, it starts calibrating but it won't cut 😖.
@@Ssandyyy-- hi no it didn't unfortunately I have no idea what is happening
@@nellyocasio1653 I figured out what I was doing wrong lol. I was placing the square that's between blade 1 and blade 2 on the top left of the cross instead of placing blade 1 🤦🏻♀️. As soon as I noticed what I was doing and actually placed blade 1 where it's supposed to be, it worked! Maybe that's what you're also doing wrong?
My machine will not do anything for the calibration of the horizontal or vertical.
Jump on live one day and I will go through it then.
I would help to know what the beginning issue is. As a beginner, I have no idea what your machine was doing which caused it to need calibration. I hope that makes sense. Thank you for taking the time to make this video. 😊
Sometimes you get a machine in the machine is just off and you have to calibrate it other times you may have printed on it for a while and it gets off It's just like a car things come loose . it just happens
Does anyone know how to do an isolation calibration? For some reason, I can get the A-B set up perfectly, but I can't get the distance 1-2 set up at all. Even with adjusting the MM, its off almost by 1/4 inch. And when I try to recalibrate it making the mm adjustments, it doesn't seem to want to move to the right spot? I am not sure what I am doing wrong.
I may find sometime to do an update on this soon
When I do this it won't even print A side says it's out of bounds, and the distance is right for 1 -2 but it's marking the cuts about an inch off...
My first calibration tutorial that made sense as well! Thank you so much!
Thank you!
OMG!!!!! HELP!!!!!!!! I tried to calibrate my cameo 3 following your instructions and now my cameo is totally screwed up. It was just slightly off now it's completely off. I can't even use it at this point. It never followed the "+'s" in the first step. It made "x's" instead. Now I can't get rid of the calibration print page. Every time I attempt to print now all I get is that darn calibration page. I don't understand this at all, I did nothing different than what you did on screen. Can someone please help me. I have orders and I can't just buy a new cameo at this time. PLEASE HELP!!!!!!!
Restarting the software worked for me to get rid of the calibration page
Wow I am just seeing this, did you get it fixed? That's really weird
Where is the calibration test page? I can't find it anywhere.
go to Send then right click Test click Calibration
Thank you for being so helpful. Sometimes I miss comments
Hi, I am trying to do a print and cut. When I load it to cut.. it is cutting but it is way off! Do you know what may be the problem?
I'm having the same issue 😕
Did you manage to fix yours?
@@Esckelson0187 any update?😢
@@fatherajay none
@@Esckelson0187 hey i was actually able to fix mines, what i do now is open the file through the silhouete application and i leave the bottom registration alone and dont move it but i can expand the rest of the marks with no problem
Mine cuts small lines in random places
I press the buttons and it does not move. What can I do?
My cameo 4 keeps cutting the older designs on top of the new designs, how do I fix this problem
I have no idea that is weird. Do you have it all on the same page if so maybe you have layers on . Not sure what your problem is
Thank you so much for this video!!!
my cutter cuts wrongly in a specific file, while cuts correctly with the other file.
Very possible. If you have a svg file vs a jpeg that can happen. It's not the cutter that I'd off. It's the low quality image causing the issue
@@ladyprintboss i found my problem... my images are too near to the markers. >_
i still dontget it huhuhu
Thank you for a very useful video on recalibrating the cameo silhouette.
you are so welcome. I am glad to help. we are all in this together. thanks for commenting
WHY IS MY CAMEO CUTTING FROM RIGHT TO LEFT ALL OF A SUDDEN ?
Its cutting all my other projects but not the cross in calibration
Every time I click the calibrate button it doesn’t do anything
this is something that I help my channel members with. If you would like for me to go live and help you consider a channel membership. the Rising boss and above memers are able to request live video help
I followed your video but my cameo didn’t cut at all only bottom left it did like a v shape :(
The cut is very hard to see. I will try my best to do another video in this but I do have a video teaching how to do a contour so that you can get a perfect cut
Watch the video in my pinned comment
I feel so dumb lol I went ahead started all over and then I noticed I have been placing that white square piece in the green square instead of the needle part lol
It got me at first too
Your tutorial was the best out of all of the ones posted!! Most clear and informative! Thank you so much
This video really helps! thank you
Thanks for watching
Thank you so so so so much! You have saved my life! 😘😘😘
I liked and subscribed! 😍😍
I'm trying to adjust the distance and it doesn't cut anywhere on the A or B lines so I can't see it. Then if I could see it, I wouldn't know how to adjust it.
I'm having the same problem. Did you manage to fix yours?
thanks for this great tutortial
Hi, my cameo will not cut anything over 2 inches down. is there any way i can fix this issue. the cameo will cut anything and everything under 2 inches. please help!!! the cameo will cut across
Go to your page settings and check your sheet size. Unchecked that box that says don't cut outside of the sheet size. That will solve the issue
@@ladyprintboss lol this helped me just now 😩😩😩 thx
@@ladyprintboss where is page settings? I’m trying to cut designs under 2 inches and it just cuts either too much to the side or too much on top and like how you mentioned in the video white appears on my cut design
Amazing video... thank you so much.
This was amazing. Thank you sooooo much. Omg
this was so confusing
Oh, sorry you were not able to follow 😪 definitely a work on progress. I do realize that what I find simple is difficult for others to understand, I am working on that.
For few minutes I’m already confused
I am sorry to hear that. What is confusing to you? I do offer live training depending on what your issue is
This video is very difficult to follow.
I am sorry you found it difficult. Calibration isn't the easiest thing to do and definitely even harder when trying to fix a machine while filming. My videos are not planned and not staged. I just do my best with what I have.
It's not always the easy fore to get the best angles to show things since I don't have anyone filming. I know the silhouette store has a video on the same thing.aybe try that one or if it's something you would like to ask here, I happy to try to help out
@@ladyprintboss I'm trying to adjust the distance. It doesn't cut anywhere on the A/B line
@@dorrineconrad9128 yes it cuts but the cut is very small I had to get a magnifying glass just to see it. Look closely and measure it from AB and CD. It may be off. I will go in and make a quick video update for you a bit later