Thank you for showing cable management, many channels tend to ignore that part while it's extremely obscure and hard for beginner like me. Thank you and good one! I'm hoping to start my build with this case this weekend
Great build. Be aware the most correct way to install a 360 AIO is with the tubes at the bottom and not top, as the radiator has a higher point than the CPU. Installed like you have it now will over time make some boble sound. Sine will say but if there is air in the pump part at the CPU it will not get out. That is not true, the pump will move the air to the radiator and it will be trapped at the top of it 👍🙂
I was thinking the same thing, I currently have a lancool 3 stuffed with rgb, Just bought the Fractal north to go minimalistic and get rid of the rgb as Im getting older I want less.
Static white lighting would look decent in the north. Just making the inside components pop a bit. Rainbow looks awful in the north Also, the north is far from being minimalistic. I'd call stuff like what NZXT has minimalistic, or define series cases, but not the north
@@g1g3l it has an other variant where the glass pannel is replaced with full metal mesh to allow the case to breathe. In this variant I dont think it would stand out in e.g an office besides looking a bit more premium.
hey this looks amazing. im gonna build a pc very similar to this however instead of the v1 fans im looking at buying the v2 lian li fans (which are around 3mm thicker?) looking at how your gpu fits in there, would a 4080 super fit with its length of 330mm? if not, could i remove the second 3 pack of fans on the inside to make some more room? any wisdom is appreciated :)
So excited to build my second PC in a few days. Already got all the parts (including this case) except the GPU. Didn’t realise you could fit three more fans at the front of the case so now I need to decide which one to buy to add to my 360mm kraken elite cooler 😂
That's one of a kind man! Nailed it!! I'm planning to do a build with a Kraken 360 AIO in front, but with only a single layer of fans. I'm wondering if there would be enough room for an Asus Strix 3090 inside the case if I fit the 3 fans from the inside onto the radiator panel coming from the outside?
Pourquoi lettre un water cooling sur la face avant ? Il expulse l’aire donc les seul ventirades qui aspirent l’air son ceux du plafond nan ? Donc ils aspirent la poussière
Hey, this is a real long shot, but I don't know where else to turn for help on this. The reddit fractal forum or others were no help, I got no answers. Can you tell me if the video i posted in my profile is normal? it's like there's a gap where the bottom on the TG panel meets the access panel.
Such a nice Case and you put a Disco inside.
Thank you for showing cable management, many channels tend to ignore that part while it's extremely obscure and hard for beginner like me. Thank you and good one! I'm hoping to start my build with this case this weekend
Yeah. I was thinking about putting the Lian Li controller box next to the PSU. But the position you are showing is way better. Thanks!
Great build. Be aware the most correct way to install a 360 AIO is with the tubes at the bottom and not top, as the radiator has a higher point than the CPU.
Installed like you have it now will over time make some boble sound.
Sine will say but if there is air in the pump part at the CPU it will not get out. That is not true, the pump will move the air to the radiator and it will be trapped at the top of it 👍🙂
What's the point of getting a minimalistic case just to stuff it with RGB?
Because during the day when it’s off it looks minimalistic and casual but when it’s at night that’s when the PC goes demon time
I was thinking the same thing, I currently have a lancool 3 stuffed with rgb, Just bought the Fractal north to go minimalistic and get rid of the rgb as Im getting older I want less.
I have also a rgb north and it's incredible ❤
But i have to admin that my rbg is white only
Static white lighting would look decent in the north. Just making the inside components pop a bit. Rainbow looks awful in the north
Also, the north is far from being minimalistic. I'd call stuff like what NZXT has minimalistic, or define series cases, but not the north
@@g1g3l it has an other variant where the glass pannel is replaced with full metal mesh to allow the case to breathe. In this variant I dont think it would stand out in e.g an office besides looking a bit more premium.
Wow, these sleeved PSU cables make absolutely no sense, a complete rats nest next to the PSU 😮
hey this looks amazing. im gonna build a pc very similar to this however instead of the v1 fans im looking at buying the v2 lian li fans (which are around 3mm thicker?) looking at how your gpu fits in there, would a 4080 super fit with its length of 330mm? if not, could i remove the second 3 pack of fans on the inside to make some more room? any wisdom is appreciated :)
So excited to build my second PC in a few days. Already got all the parts (including this case) except the GPU. Didn’t realise you could fit three more fans at the front of the case so now I need to decide which one to buy to add to my 360mm kraken elite cooler 😂
Haha, the extra 3 fans are unnecessary. I only installed them to show that you can. Good luck with your build!
@@SubdubbinThanks! Build went well, just waiting for the 7800xt to release now 😂
@@Subdubbin but the idea was nice. Why do you think they are unnecessary?
im building a similar build but using a 3090FE with 360 aio for cpu, but no fans on aio on the inside
@@Subdubbin
That's one of a kind man! Nailed it!! I'm planning to do a build with a Kraken 360 AIO in front, but with only a single layer of fans. I'm wondering if there would be enough room for an Asus Strix 3090 inside the case if I fit the 3 fans from the inside onto the radiator panel coming from the outside?
Adding rgb in this case is a crime..
How much clearance do you have between the GPU and AIO? Planning a similar build (withou the push-pull setup) with a 4090.
This is awesome!
please how are the cpu temps with this aio placement?
oh wait there is a PC case on this video ? :D
Excellent build @subdubbin. I have a quick question. Was all the RGB lighting controlled via the motherboard software or L-connect?
Thx! I controlled the fans through Lian Li software. I used Open RGB for the GPU and RAM.
So you are pulling hot air from the radiator into the case?
Pourquoi lettre un water cooling sur la face avant ? Il expulse l’aire donc les seul ventirades qui aspirent l’air son ceux du plafond nan ? Donc ils aspirent la poussière
Just got mine love it
Hey, this is a real long shot, but I don't know where else to turn for help on this. The reddit fractal forum or others were no help, I got no answers. Can you tell me if the video i posted in my profile is normal? it's like there's a gap where the bottom on the TG panel meets the access panel.
Is that orientation for the aio fine ?
subdubin killin it again
In general i plan the same. Using a kraken elite.
How long do you think is the maximum length of the graphics card??
nice build
which cable sleeves are u using?
I'm using the AsiaHorse white cable extensions
Fire
hard
dood, he goes harderr than that
RGB just ruins a nice case like this
spend less money on the motherboard and more on the cpu
How to ruin a great looking stylish case. Just put in some some RGB rubbish.
Why use white cable extensions when your power supply already has white cables.... Just more cable clutter that you have to stuff away.
just lose the music and talk. People are here to learn.
im gonna copy this exact build! i love it😍
i just wish that case was a little bit bigger
What gif are you using on the LCD of that kraken? it looks so insane
Please tell us the name or where to find it
I will upload it to imgur and paste the link here!
@@Subdubbin OK! thank you
@@Subdubbin Any update on that?
@@Subdubbin Im still looking for this gif if you got it.
is that push/pull (6x fans in aio) worth it? like does it affect enough for the extra money put into it?
Definitely not worth it! Just wanted to show it could be done!
Question what is that part at 10:47? What does it do exactly?
It’s a fan controller
Is it necessary to go with 6 exhaust fans can i use just 2 fans 2x140mm
Start with the 2x 140mm fans and see what your temps are like. Then maybe get a 120mm exhaust if you need it.
Hey bud! Great build! Question for you, the six fans in the front are intake fans right?
watercooler radiator have to be mounted on top, so bubbles stay on top and don't go back to the pump, avoiding noises.
the graphic card the does not match the horizon 16:03.use support