Checking Out An Old Tractor Backhoe Worth $600?
ฝัง
- เผยแพร่เมื่อ 10 ธ.ค. 2023
- Went up to Easton, Pennsylvania to check out this old case model 32 backhoe loader. I decided to pass on it but the owner said he would take $600 so if you're interested here's the listing. marketplace/...
He might even go cheaper who knows. I told him I would take it for free if nobody bought it.
THANKS SO MUCH FOR WATCHING!
~NNKH Shirts / Merch: www.NoNonsenseKnowHow.com
~Become An NNKH Member/Sponsor Here:
/ @nononsenseknowhow
~More NNKH @ linktr.ee/NoNonsenseKnowHow
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Awesome Channels You Should Check Out:
~Jennifer Sugint: / @jennifersugint
~Project Farm: / @projectfarm
~Vice Grip Garage: / vicegripgarage
~Trail Mater: / @trailmater
~Junkyard Digs: / @junkyarddigs
~Car Wizard: / omegaautoservice
~Chris Fix: / @chrisfix
~Andrew Camarata: / @andrewcamarata
~Fab Rats: / @fabrats
~Pole Barn Garage: / polebarngarage
~Mustie 1: / mustie1
~Puddins Fab Shop: • I found another ABANDO...
~Mortske Repair: / mortskerepair
~DEBOSS Garage: / debossgarage
~South Main Auto Repair LLC: / @southmainauto - ยานยนต์และพาหนะ
I think after somebody puts $2,000 into it they would have a really sweet $1000 tractor... 🙂
I’m thinking $5000 in for a $500 tractor that will rust forever. Rust in flooded equipment and wire is a never ending problem!
Might not make the worst parts machine though. No major tin damage, pins all look tight, rads good, pump is probably OK too.
Chris, to be honest I think free might be even too expensive for this thing. Good for parts, but I don’t think it could be saved from being scrapped. By the time you price out rear rims, possibly tires, hoses that need replaced, plus the time to winch it on a trailer, motor condition, transmission, etc.
yeah, sadly people don't realize that usually.
Many guys do it as a way to save the technology of yesteryear. Yes, it might cost more than it's worth for some, but definitely worth it for others.
@@daleyingling4868 the thing is there are fully running and functioning case machines out there for $1500-$2500.
Good move Chris walk away cheers 🥂 😊
I would cry when after expending all that time and money refurbishing the home when the next flood comes. Wish the owner good luck! 🤞
Seriously. Especially a flood up to the top of the first floor. That property should not be built on, period.
Beautiful drone work over the river and the night views, Chris!
Last time the Delaware River folded was in 2006 17 years ago
They can't all be runners - could tell from the length of the video that it was probably going to be a pass. I don't blame the owner for wanting to get all he can, but that machine looks a bit too long in the tooth - probably needs an engine rebuild. Really appreciate your enthusiasm for the location and the drone shots - another reason I love your channel. They are rich with varied content and some context that brings us along and enriches our minds. Thank you, Chris!
Smart move on passing to rebuild the loader. Spectacular drone night footage.
what a property. wow. and great night time bridge drone shots at the end. thanks for bringing us along.
Chris I have to say i enjoy pretty much all your videos on all 3 of your channels. Thank you again
Awesome to hear that and can't thank you enough to tuning into all three
You are a soldier for even trying something so crappie kuddus to you chris you are definitely a person with a exceptional amount of intestinal fortitude and creativity!!
I've had a couple Sears boats, always were a sturdy craft.
What was that Dionne Warwick song called....oh yeah......Walk on by.....😂😂😂😂😂
Chris The model 32 was made from 1960-67 FYI Cheers!😊
Easton has their peace candle up every year at Christmas time, it's beautiful to see my home town
Yep; probably wise to pass on that one...The boat, however, could be fun, esp. if you could find an old "Ted Williams" (Sears-branded West Bend, IIRC) outboard! Nice drone shots of the town all lit up w/ holiday lights...Good also to see Mr. Turbo and the Gus-Man out and about!
Cool Music as Usual! And beating through the bushes!👍👍👍💪
You could do at least $1000 just on hydraulic pipes, let alone the engine work and a possible a cylinder reburb. Chris, so right to walk (run) away 😊
model 32 is the loader/hoe I believe. The tractor would be a 430, 530, etc. I had an early 60's 530 which was a bit bigger than that. Looks like the same 2.6 4 cylinder gas engine. My loader had a separate tag with a different model as well. Those case tractors that came with the hoe/loader all in one setup typically did not have a pto. They basically built a backhoe off of a farm tractor and did away with the 3 point and pto. Removing the hoe/loader attachment is no small feat. Pretty sure it's a sleeved engine, but realistically that machine is worth scrap value minus transport cost.
Love both your channels man, great work. The diversity and sometimes just beautiful scenery makes what you do different from the rest and unique, but sure do enjoy the road trips. Happy holidays, have a good one.
Perfect Flex Seal boat !
Nice shots of the Delaware river....👍
Gus n Turbo...best pets on TH-cam ❤❤❤
Total bummer. Well you tried. Great job
Chris as good as you are this one was too far gone, good decision to leave it, loved the drone work as always👍🇮🇪
Thanks Chris
I definitely wanna see that boat go down the river
I think model 32 was the backhoe attachment. Looks like a 580 CK tractor. They were great units back in the day. I think this one's day has come and gone.
Jen would have that running by noon tomorrow.
Case 530 TC. The tractor is actually a david brown fork lift base. First rubber tired backhoe loader made by case.
I'm in Texas and I really love seeing the beauty of other parts of America. What a gorgeous night that was. Thanks for sharing! And you know, you really should quit making Gus and Turbo work so hard. 😉
Not a waste of time, beats sitting at home. You never know what you'll find out there even if it's not what you went to check out in the first place. I really liked the over/under garage at that house, that's my dream to build one like that someday.
But a little further away from the river!
Chris....please turn that FL60 into your field mechanic rig, it would be perfect for what you're doing in this video and a lot easier to manage organization.
The ambulance? That would be something... it could carry EVERYTHING but it's size might make it tough to go into the back alleys that Chris sometimes traverses...
@@samvalentine3206 Yeah, it's definitely not small. I could totally see Chris turning it into a field mechanics dream based on how much stuff he's got tucked away in the Tundra.
Another adventure with Chris. I love it. How bout them Cowboys!!! Nice jazz and aerial footage there at the end.
Dang, what a tease, thought Chris was going to get this heap running. Still ❤️ Chris as always!
This was perfect house for you and Jen fixer upper 3 1/2 acres . I love Monday mourning videos
No u in morning
Great drone shots as usual. Chris, - quite the cinematographer :)
Time well spent. . . In the end, amazing video of Easton, PA. You made the best of it. Beautiful footage.
good move!! if he paid to haul away,maybe..looks a great place to live,a few acres with a roomy house,barn,garage for toys..
as always ty for the cool video. love to see you guys get a dream home
Just bought my first backhoe. 1963 John Deere 500 Industrial. It had a few issues that were revealed but if I had more time to go over it I would have offered less. But I have it now & looking forward to putting it to work. This one you are looking at is too far gone. If you had the time to put into it maybe but it being in the flood, just too many unseen issues. Even though you had to walk away time well spent. Great footage with the drone. Adding another 👍
Stay well, Joe Z
I would charge 100 bucks to remove it from the property 😂
Incredible that the river flooded that high and that far out of its banks. OMG. Wow, great city scenes.
It’s never a “flopper” when you post a new video.
Chris you should have checked out the fish ladder! It is on the opposite side of the lehigh from where you were standing
I like these vids where you go and check out old gear. Whether you buy it or not, still very interesting to see. Reminds me of the super old machinery pops had (Massey Harris/FarmAll/Case).
I always enjoy the vids.
🗿💨 looks like the one that i had in the 90s, hard to find crank in that engine. Expensive rad to recore too. Thanks for sharing Chris 👍
Every time we get a big hurricane down here somebody revives one of these old backhoes to clean up downed trees and ends up getting themselves crushed when a tree trunk rolls down the loader arms or backhoe boom into the operator's seat. You have to really know what you're doing and not get complacent to work one of those things.
That Case has the self leveling system for the bucket , it’s that short cylinder on the right side near the controls , still yes if not operated properly you could get hurt
Such a beautiful place I'd love to hang out with y'all just to go see the awesome places and maybe do some fishing 🎣
Great video. Seeing you say no encourges others to walk awy when the deal is not worth it. Thanks
Cris made it up to my neck of the woods! Hi neighbor!
Absolute wanting to see that boat thing😅
Hey I"m in Eason.....next time your in the area give me a holler.... great place to live....next time your looking to relocate!
If it was diesel it would be worth the effort thanks for sharing this six stars brother
Old turbo and guski I love them both keep on keeping on man have a good one
It looks to close to the door but you need a cover on that GFI,water gets in ,damage to your siding and I had seen 2 or 3 fires.you will have to cut and adapt a bubble cover but is important,thank you for your videos
It hasn't been a problem yet, but yeah maybe I'll put a plastic cover on there. Thank you
I have the same little boat, mine hadn’t been ran since like 2000. All I needed was a trolling motor to go around on a small reservoir. It’s a very nice boat and I doubt there will be any holes in it. Everything will be pretty easy to pressure wash other than the seats if it’s the same ones as mine. The stuff is stuck on there
Dear NNKH guy.
👍👌👏 This is the kind of property that I wish to you and Jen (without the flooding of course). And yes, of course I totally agree: Leave the backhoe for a scrap metal dealer and come back for the boat in spring/summer. 2) I didn't know that cute little Gus man 💚 can stretch even more! 😱
Thanks a lot for making explaining recording editing uploading and sharing.
Best regards luck and especially health to all of you.
His name is Chris not "NNKH guy"
Dear @@jasonswift7098
So? 2) I don't know his surname and therefore it isn't appropriate to address him by his prename Chris. At least it's not appropriate for guys like me!
Best regards, luck, health and wisdom.
@@Chr.U.Cas2216 haha his name is Chris ok that is his first name i never said anything about surnames, address him as chris in the future ok, dont call him NNKH.
@@jasonswift7098
What? No, that's definitely not okay! Haven't you read my former comment or did you simply not understand it? Maybe you even think that decency and good manners are not longer necessary in todays world? By the way: Do you really think that you are allowed respectively in a position to tell me how I have to address people? That's a joke, quite a bad one but still a joke.
@@Chr.U.Cas2216 Yes i will tell you if what I am saying is correct ok, I told you not to call him NNKH his name is Chris, then you rambled on about his surname which was not even the topic so i called you out and told you how to do it, dont get your knickers is a twist about it because you dont understand english grammar.
Magtag washer in the background Would be a nice score Looks like a belt driven They were built like tanks
16:25 reminds me of memphis ,TN
This looks like a job for Matt at Diesel Creek... 👷♂️🚜
Gotta know when to fold em.....good judgement.
Thanks for taking us along..Also a lot of great comments on this video that I agree with.
The boat video would be cool.
Good video thanks for sharing hope you get the boat to do a video
Good fun though and great images! Love your video work! Such a kool area to live!
Excellent video Chris :) also yes that tractor be challenging to get going and when corrosion lots them too ! Also be great parts one for sure and hopefully get boat to plus fix up to!
Thanks!
Thanks so much!
Yes I would love to see you work on old tractors like that
Would be a cool place to visit.
That's definitely a cool property I use to leave on the water I wish I was still there I miss that place
Looking good Turbo! Gus meister too!
thats a david brown tractor. with a case loader
Case.tractor
I just paid 1k for a early 80s Ford 755. She big girl but didn't run, one flat, 3 leaky cylinders and sloppy pins and bushings. Put a new battery, starter, and a lift pump on it and got her going. Had to bleed the steering pump and add a bunch of hydraulic oil but after a $400 lowboy ride, its back at my property running and digging for under 2k. Gonna fill it and run it before I fix it when it warms up. Just gonna change the oil and some filters and send it.
chris, i have one that runs, hydraulics work. one back tire bleeds over time and there are oil leaks, but it runs. same price
These clowns always get me. Their asking price is usually what they should be paying someone else to get rid of their headache.
Your videos are excellent. Your garage is totally organized. Your Tundra, not so much.
Run, run fast, scrap metal only
If you get it running
You can drive it to the bottom of the river
Pass on that one buddy
It is a 530 CK gas Backhoe . I am restoring one right now . The starter cost to rebuild was about 150 if you can find somebody still does it or the parts for it. Luckily mine runs and works . My father and I rebuild it 30 years ago . And now we’re repainting it the second time to sale. They are a very good machine to use once they are fixed up
I have a 1964 580 CK loader/backhoe diesel . It spent most of its life doing maintenance on a glof course, so in really nice condition. I have had it for over 25 years. Use it every year. Rebuilt cylinders and hoses was my only real repairs.
Does Turbo ever initiate the attack on Gus or is Gus always the one to start it?
Turbo usually launches sneak attacks on him especially at dusk or in the evening. Otherwise it's usually Gus messing with him.
Nice Place!
Love all your videos man, Flop or not it is always very interesting, to me at least, ya lost my GF about 10 minutes in hahaha
That's a good one to walk away from.
Ck530 i think. I have same backhoe attachment on my 55 IH 300u.
That place would be nice for ya’ll!
I think he would be better off selling the backhoe, stabilizer stands, forks and bucket as separate units. Then scrap the rest. 😊
Cool videos Chris
Hi, well you can’t win them all, but the view’s were good 👍🐝🌞
They got those bicycle wheels on that boat so's you can just wheel it down to the waters edge.
Cool property - but that loader would take weeks and $$$ to rehab. I'd pass to.
Owner needs to give it away! OMG😊
Don't blame you 😉 I'd take a pass on that one as well.
Both the frontend loader and backhoe attachments sell for $1000 each.
Exactly my thoughts too
@@gheice_modelism I'd call the local scrap buyer and see how much they pay for scrap iron and then offer the guy selling the tractor $50 above the scrap price assuming it's $600 or less. It should weigh around 5000 pounds. My guess is the scrap value for the entire tractor is $400 If the scrap yard tows it off the property as is.
Then sell the front-end loader and backhoe for $1K each. That motor still might resell for a core charge price. The radiator is most likely copper/brass which has a good scrap value. The starter has copper windings good scrap price.
Rough estimate I'd say there's $2500 in profit from reselling parts and scrap value.
I'd strip it down and call the scrap yard to come pick up whatever's left.
You need a bigger property Chris !
Still a great video even if you didn't buy it
RUN FOREST RUN!!!!!
Yea, should be free or maybe 1 or 2 dollars, max
Was thinking they sit Alot so probably runs fine but at 1550 you said seized?
Could offer to deliver to scrap for 1/2 the money.
Locate some used tires just in case it becomes yours it'd be fun to get it working..and after paint what would it sell for..$2-3k?
You should give him $300 and tell him to throw the boat in for free, just think of the money's you could make with that sweet backhoe & front bucket work. Little R&R Pull the head sand the cylinders out good to go 👍
It’s about a 1962 year Model 32 Case