Cutting EVA Foam on a CNC Router

Demonstrating EVA foam cutting applications on a customer's standard series 1300mm x 2700mm table as part of final testing before collection.
This machine features a few of our popular optional extras available with our standard series :
- 2.2kw water-cooled ATC spindle (24 000RPM)
- Closed-loop feedback hybrid servo motors
- 5 position tool changer with offset measuring
- T-slot clamping system with replaceable MDF
sections
- Air blast nozzle for chip clearing
For more information on the cnc machines we manufacture, visit our website - www.kelbrandcnc.co.za/

[@vigigamehacker123]

that foam gets everywhere

[@segemy]

Very cool, thanks for sharing. That is a nice machine you guys manufacture Kelbrand. ♨♨♨

[@kelbrandcam]

Hi Jean, thank you for the kind comment.

[@tojojo]

Run this using G64 and it would run a lot smoother given the pocket is likely defined by a traced spline instead of a series of arcs and lines.

[@kelbrandcam]

Thank you for sharing this information.

[@ethanholleman4363]

Any info on feeds, speeds and tooling? Thanks!

[@kelbrandcam]

Hi, We used feed override for most of the toolpath but were initially cutting at 25mm/sec feed.

[@Spodokamono]

I love this, I think your machine is a bit overkill for this project though.
How about I give you my 3018 and take your machine off your hands.
I am literally doing you a favour, LOL
Thanks for sharing 👍

[@kelbrandcam]

Thank you for the comment, If only this was our machine to give.

[@siukcnc]

You're cutting too slow and no reason not to cut to full depth! Cut foam as fast as you're CNC will let you.