What Happens When You Procrastinate...
ฝัง
- เผยแพร่เมื่อ 16 พ.ค. 2024
- Let’s face it, it’s far too easy to push off all the little inconveniences and annoyances that crop up while working in the shop. Especially so if they get in the way of the projects we actually want to make. But sometimes those annoyances all converge on one machine. Making it... Less than enjoyable to use. This is what happened to my milling machine. It has a few small issues that I’ve been putting off for one reason or another. But now the problems have escalated to the point that I just can’t take it anymore! So today I’ll be diving into what’s wrong, fixing those issues, and making a few upgrades along the way. Enjoy!
#inheritancemachining #machineshop #hobbymachinist
Patreon (Early Access + Ad Free + Drawings) - / inheritancemachining
Drawings Store - inheritancemachining.com/?pro...
Merch: inheritance-machining.mysprea...
Instagram - / inheritancemachining
Website - inheritancemachining.com/
Amazon Storefront (affiliate links): www.amazon.com/shop/inheritan...
Thank you again to the Micrometer level Patreon members listed at the end of the video!
SUPPLIES (affiliate links)
Drive Belt: amzn.to/3rAcp4m
VFD: amzn.to/46YNjvX
Enclosure: amzn.to/44VjACk
Cord Grips: amzn.to/44RtuVM
Power Cable: amzn.to/43wEuql
Signal Cable: amzn.to/44Veer0
Zip Tie Mounts: amzn.to/43CmQkW
Power Switch: amzn.to/43BDjpM
Cooling Fan: amzn.to/3Q2u26P
Toe Jack: amzn.to/3Q0FaRP
Threaded Rod: amzn.to/3rE6Did
Drill Bit: amzn.to/3rE6BH7
Anchoring Epoxy: amzn.to/44SP4sV
TIMESTAMPS
0:00 Intro
1:15 Rubber Evaporates?
5:42 Troubles on Re-entry
9:09 Phase 2… NO! 3!!
11:41 Cable Management
15:40 Learning Curve
19:47 Rockin’ and Rollin’
21:32 Change of Plans
23:26 It was a good run…
25:08 Killing Time
26:53 Should Have Done This Sooner
FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
www.epidemicsound.com/track/S...\
• What Happens When You ...
© 2023 Inheritance Machining, LLC. All Rights Reserved. - วิทยาศาสตร์และเทคโนโลยี
Don’t tell anyone but I might be procrastinating while watching this
watching this to procrastinate
Same
Big cheap TV in the back of the work area my dude. Work and fun. As long as you don't do any finger chopping activities, it's a great way to take the edge off.
Shhh!
Well my boss catched me, now we are procrastinating together.....
I'm appalled by the lack of chamfers on those levelling blocks
I just was about to comment about that 😂
Yeah! I agree!
They deserve a place in that box of shame🤣
I could not agree more.
he's been cutting corners
You might want to revisit the painted over ground pin. Its grounding nothing with insulating paint on it.
I always removed paint from behind ground lugs I installed in panels... However, I genuinely believe that the nut will remove paint from the threads of the stud when it's being tightened. Ideal? No. I think it would function as a ground, though.
All the electricians watching this are having anxiety pangs when they see grounding terminations attempting to do their job through that paint. "Bare metal!" was uttered silently.
We were all thinking it.
Relax, when it faults out it will burn the paint off real quick.
^This! There are special washers for this with edges that dig through the paint.
Things we didn't know we needed but now must have: an Inheritance Machining blooper reel.
At the start of my career I did an internship at a small local machine shop. They had a mill vise that was kinda broken, but kinda still worked so they put it off and made do with it. Until I dropped the vice and broke it completely on a thursday morning. The master machinist got really angry and send me home for the weekend. When I came back in on monday morning everything was fixed and worked like it was supposed to. He wasn't even angry anymore, in fact he was kinda glad that my mistake forced him to fix this annoyance once and for all and he did not have to put up with it anymore.
That's sad but nice, just because something "works" doesn't mean it shouldn't be improved.
That and also maybe a personal opinion but you shouldn't get mad at people for screwing up. I can see getting mad at someone for not handling the mistake properly but just getting mad doesn't help anything.
@@DoubsGaming Well, improving for sake of improving doesn't pay the bills. You need to trade off time saved thanks for thing being better vs time wasted to improve it, if that's your job. We got a bunch of stuff that would realistically benefit from improvement but it would take literal decade for improvements to pay off because it is improvement in rarely done task.
@@xani666on the contrary. Shit breaking once and for all when you're behind schedule with a deadline costs a LOT of money.
@@xani666 I don't think the OP and @DoubsGaming meant that the machine was due for a few nice-to-have improvements, they were talking about overdue maintenance to bring back a tool to its original and intended function. There is a difference you know? If something somewhat "works" only with workarounds walking on egg shells around the issues subtracting from its original functionality with a high potential of complete breakdown at every moment it means that it actually doesn't work!
@@d1oftwins That's what I'm saying; I've seen some people focus so hard on "making stuff better" that the tiny incremental improvements stop being worth the effort, and it's all too easy to fall into that trap, especially if you're hobbyist that doesn't see the inefficiency in potential lost profits.
It's criminally insane that TH-cam isn't pushing your videos to more people; One look at the production quality and professionalism of the videos, one would think you've been doing this for ages and already have a million subs. That said, love the content and happy that you chose to share your time and knowledge with us
Thank you and my pleasure! We're still pretty new as far as channels go but we're doing alright. That last video defintiely got the push haha
He's actually doing pretty well at over 270K subs in only about a year. He's gaining nearly 800 subs every day. Seems to me that's pretty good for a relatively niche subject.
I subbed after watching the first video. I have not regretted.
TH-cam obviously is pushing the channel. Otherwise it would be literally impossible for a new channel like this to grow as fast as they did.
@@kindablue1959 40K since this video posted 2 months ago
On your lead in picture, you noted wobbly, noisy, and under powered. Pretty much sums me up!!
You n me both, mate 👍🇦🇺
these videos are perfect way to relax after a long day. i find them oddly satifying because of the precision in these videos and in your projects as well (or something) + you have super relaxing voice!
Much appreciated! I too enjoy a moment of relaxation after finishing each video 😂
@InheritanceMachining I've only recently started watching, but the storytelling combined with clear skill, it's very impressive and hope to see you grow and grow as the years carry on, brilliant work bud.
@@R6Edward3946 Thanks, man!
@@InheritanceMachining aaaaaaaaaaaaahhhhhhhhhhhhhh....................cvt,,theres your problem,,it dont work in cars,,hows it gona work in a mill...akuratly...cheap nasty invention..GEARS MAN,,,YOU NEED GEARS.. NOT TIMING BELTS..
13:57 I used literally thousands of cable tie mounts during my career (I built & maintained radio studio & transmitter facilities), but I don't think I've ever seen an adhesive mount stay stuck long term. Plan on running a countersunk fastener through those eventually, especially if they're exposed to heat. Epoxy may help replace the VHB adhesive if you have to forgo screws.
YEp, they never stuck.
Our panels at work get hot and the sticky pads never last. I so want them to. One site I was on used the pads without the sticky tape . They used epoxy. I am going to try cutting off half of the tape and adding epoxy. That way the pad will stay in place until the epoxy sets. Thoughts?
@@djwmunroget the type that use a screw and nut. Do it once. In over fifty years of telecommunications, broadcast technician work I think I've used most types, and a Panduit mount, genuine Tywrap ties, the black ones with the metal clips, will outlast your working life. A proper tensioning/cutoff tool will guarantee the proper tension, especially on data and RF cables and the cut off ends won't tear the skin off the back of your hands next time you have to do anything inside the box. Ties trimmed with wire cutters will leave razor sharp ends that'll cut you faster than a kbar.
Indeed, they never stay where they are supposed to be. What kind of seems to work is to replace the ususally cheap adhesive tape by some expensive 3M stuff, that tape never failed on me. But for the price of the roll of that tape you could probably replace the parts once a year for the next 50 years :)
Maybe it's a small thing, but I appreciate that you make the intro different in every video - I don't want to skip a second.
Also, the cleaning is really satisfying.
Thank you. My wife really appreciates this comment since the intro's were here idea 😊
Love all the video. The wiring looks awesome. One thing to make it look and function even better would be ferrule connectors on the stranded wires going into the terminal blocks.
Thanks! Yes you are right. It didn't occur to me how inexpensive a ferrule kit was or I would have gone that route!
@@InheritanceMachining I hadn't either until I recently started to rewire my R2-D2 and realized how cheap and easy they are to use.
They are nice but not really necessary. The standards for these terminals require that they be made in such a way that they work properly with bare wire.
The control panel on the front of the VFD is removable! Rather than stuffing it inside the box, you can run an extension cable and place it in a more accessible spot - like a 3D printed enclosure with a magnet on the back. :)
oooo I really like that idea!
@@InheritanceMachining can you say "Side Project"? I knew you could...😉
I believe they sell longer cables on Amazon for this very reason.
They also sell plastic housings to fit in panels, to hold the control panel. Definitely do that. Even though most of the "gearing" is made redundant by having access to the potentiometer, seeing the display is cool. I believe you can see amps drawn so you could even adjust feed or depth of cut to maximize the motor load
Such a pleasant experience watching your videos. I always feel so satisfying afterwards as if I had done something productive myself.
Love the behind the scenes at the end. Your wife is amazing.
She's literally the best. Thanks a lot!
PS: If you ended up learning anything then it was at least a little productive. Sortof...
Your channel is unique. Thanks for taking your time to show what good machining is.
You are very kind. Thank you!
I agree. Your channel is unique and individual.
Just like everybody else’s. 😅
You can really tell by the descriptive prowess he uses with the improved mill that he's been reading the works of Jessa Dare for a long while
If there's one thing I learned when ordering cases for stuff like the VFD, it's to go one size up from whatever you think should be fine. That will save you the need to try to cram stuff in and make it work. Another thing you might want to consider is labeling your wires.
Wise advice! The thing I ran into with this one was the depth. once I jumped over 8" the other dimensions got excessivly large, as did the price.
@@InheritanceMachining On my Ajax mill, almost identical, I used the original incoming 3 phase mains steel box to house the VFD's, I cut clearance holes in the back of the box and then spaced the box forward about an inch and a half to give frontal clearance. Literally thinking out of the box! I also cut windows in the front so I can see the VFD displays while the mill is running. Mine has a second motor in the knee for the table motions.
I was impressed that you got more than half way through before you started your first side project! Well done :-)
😂 thanks!
The very witty chief engineer at the company I once worked for didn't call them "side projects". They were referred to as "Gold-plated scope-creep auxiliary enhancements" and were expected to be included in most jobs. Necessary? Maybe, maybe not; but why take a chance!
I don't know how I stumbled across your channel, but so glad I did. I've been watching since early on and really enjoyed your projects and editing style and it has been a joy to see your growth. Your humor has begun to shine through more and more and I'm here for it. I especially liked the little outtakes at the end. Thanks for being so honest and thoughtful, I hope you continue to have great success in everything you choose to do.
If he slowly replaces every broken piece of his mill with a self-machined piece, is it the same mill? What if you reassemble the old pieces into a new mill? Has he created his own brand new mill? Is the new mill his own design or the design of the original manufacturers? Does the mill create pieces for itself? Mill of Theseus brings up too many philosophical questions.
Now you just have to make sure, that your power converter is set to the correct frequency (50 or 60 Hz depending on the motor). Otherwise your speeds will always be incorrect :)
I believe I have the same model and it can be programed to always start at the same frequency, yet let you change it after via the knob if needed.
Great idea with the zip tie spring compression. That segment made me laugh out loud:) Great videos - thank you!
As much as I love your "normal" machining videos, this one is my absolute favorite by far. Shop improvements are so satisfying, and you and your wife have done a fantastic job making a compelling, interesting story to experience
This video was incredibly satisfying to watch. Great job!
Cracking the faceplate is always the most important step. Glad you didn't skip it!
So you picked the third option for reversing the motor - make the switch lie. I would have just swapped any two motor phases. Option two would have been in the VFD parameters (probably).
My issue with the lying switch is that the next guy to touch the wiring will need to figure out what the heck is going on. And I am always looking out for the next guy. Because he is usually me. :)
😂 Honestly I didn't pay much attention to the order I connected them in the switch to begin with since I knew I could just reverse them if needed. Swapping motor phases would have worked too of course
ahahaa nothing worse than fixing something and forgetting what the hell you did
love your videos! i always find them very soothing and relaxing
Thank you! 😊
1 Little advice - I would clean the powder coating of earth terminal. That includes the bolt that is coated.
The vibe of your videos is just great. I really enjoy hunkering down and absorbing everything in your videos! I'm currently taking classes in regards to machining and seeing you work really gives me something to strive for. Keep up the great work!
i gotta say, even though i really can't wrap my head around using freedom units for machining you make it work with style.
i respect you for that.
I think for bolting it down I could have marked the holes, moved the mill, and put in female threaded anchors in the slab. That way, if you ever need or want to move the mill you can without either cutting the bolts and/or lifting it 8 inches off the slab. Edit: I use Wej-it Power-Drop anchors for this purpose!
Not a bad idea!
@@InheritanceMachining still, a second nut to lock the first can facilitate removing even very troublesome bolt. I don't know what that anchoring goop is, but is it possible that applying heat would loosen it up (if you wanted to remove the mill without lifting it)?
@@ExtantFrodo2 sika claims that you need up to 190kN (i guessed the rod size to M16) for those things to fail(although they say the short-term temp range is only up to 80°C so maybe you could get it out with heat? So i'd say that thing stays there for now :D
i think if you ever wanted to move this thing my bet would be on taking a reciprocating saw and cutting the anchors under the mill, sounds like fun :D
I'm pretty sure the epoxy becomes like an threaded anchor.
So if you was to lock 2 nuts together in the stud. The stud will wind out of the floor and be able to be screwed back down.
@@matty.bull1980 If mold release of some kind was used on the threads - maybe. But that stuff is tenacious, and all thread doesn't have the smoothest of threads and all that texture is going to sink your ship fast. I would love to see a test, but I'm saying it's not coming out.
So much respect for the dedication to your qualitiy of work .
I really hope this comes across as a compliment, because it is . . . Its amazing how you balance brilliance and practical ignorance into your projects. I find myself impressed one moment, and shaking my head another throughout your videos. I also know the satisfaction that comes from feeling your way through unfamiliar territory and coming out on top. You're clearly very intelligent, if somewhat inexperienced with the actual machining. Your attitude towards diving into the work, and shrugging off the blunders is great. Keep up the good work! I look forward to more content.
Im 30yrs old. and im just now starting my career as a machinist.
I absoutly love the work! and seeing how you do and how you approach the problem at hand, has made an impact at my work, and schooling.
Thank you for these videos. they're relaxing enough to catch the vibe, and entertaining enough where i learning something.
side note. How does the level works?
This js helps my soul and mind very satisfying....taking pride in your work is the most rewarding feeling ever
Good upgrades, thanks for sharing the process & enjoy the improved experience!
When I saw you making the plate my first thought was "Why don't you use the mill?" Then I remembered...
7:56 It’s like those “Rubber Band vs Watermelon” videos🤣
The sheer joy you get from doing these kind of job is like no other and as always the joy and relaxation I will get watching your videos with the mixed in humour 👏🏼👏🏼 great job looking forward to the next project
If you haven't seen them before, Dymo/Rhino make label makers that print onto shrink tubing so you can label your wires. Great for those of us with the O-C-D. 😊
Great video, I had a similar experience with my astrophotography hobby, it was rocking miniscule amounts but never fixed it, until a few years later. Boy did that take away a lot of frustrations during data collection. Always tackle the annoying bits. :)
I can only imagine how much that was amplifying at high magnification!
Just a 1/2 degree puts you all the way on the wrong side of the Moon…
Ive been watching more of your videos lately. You have become one of my favorite machinist channels. Keep doing it your way brother.
The cable management in that box aweakend interesting feelings in me.
Beautifull work!
If I may suggest something, print the documentation of the VFD and attach it to the enclosure door. Or at least a quick guide on what you have plugged on what, or a QR code for the manual or w/e. I don't think you will have any issues, having a quality unit and being so overspec'd. But for no cost this could save you some headache in the future.
good idea!
Energy Bomb is going to be the drink I make after work tonight! Love the content!
Love the little out-take! Another great video -thanks!
Great improvements, beautifully documented!
Amazing content as always! Could you try to make a fractal vise? I think it would be a challenge but pretty cool once finished.
Thanks! Yes I'm still playing with the idea 😉
Did it look like the panel for the VFD could be detached? If so, instead of removing the knob, you could just move the panel, or even mount it on the door itself?
It is removable, I have the same one for my south bend 9” lathe
These are always my favorite videos, just looking inside tools, cleaning them, making them better.
There is so little attention for the love of technology, fortunately there are many more people than I thought. What a wonderful channel. Thanks a lot and please keep sharing these projects.
Really enjoying your content. I encourage you to stop using a crescent wrench if possible.
After you put you mill back together, and tested it, the shaft at the top had some wobble to it, is that a bad bearing or what?
The drawbar? those almost always wobble. all it does is retain the tool so it really doesnt matter that they bend a little.
your videos just keep getting better and better. keep on doing what youre doing, we love your content.
Another educational video, well done.
The outtakes at the end were the best part. It was great hearing the laughter.
I enjoy watching your content so frickin much! Everything from the quality, to the humor. Absolutely a blast! Keep it up!
Thanks for making these amazing videos. This is now my new favourite channel on TH-cam
These are the best videos. Making machining interesting and enjoyable is a rare talent. Not to mention the fantastic work that you show us! Thank you!
I love the engineering, camera work and especially the soothing voice. You got yourself a new sub!
Thank you so much! Welcome!
one of the more relaxing channel about machining, everything's calm and relax, most of the time anyway, and the release time of the video is just perfect too, appreciate it
Thanks so much!
Just watched this again.
Can't wait to see how fast we can chamfer parts now with the gearbox all sorted.
I love the insight into how you develop your narrative voice and tone
Of all the maker, shaper, youtube creator channels I watch, yours brings me the most satisfaction.
It's a near perfect blend of seriously not taking yourself too seriously, and high quality craftsmanship. Both engaging and relaxing at the same time.
When I see that you've uploaded a video I actually specifically save it for my after breakfast coffee time, some of my most cherished time in the day.
Thank you for putting these projects, and yourself along with them, out there.
As always, I'm looking forward to the next one.
I love hearing that! Absolutely my pleasure!
I'm really happy I found this channel. In the last couple of days, I've watched all the videos and enjoyed them very much. The photography, the editing, the story, and the precision are really appealing. I'm happy all your work is paying off, as getting to where you are now in such a timespan is a great success. Can't wait to see more. Keep up the great work!
I really appreciate that. Thank you so much!
Currently my favorite channel on TH-cam. Keep up the amazing work!
Very awesome upgrades.
Almost like a New Machine now.
Definitely a game changer. 👍
Thanks for sharing the process.
Fantastic episode, full of wholesome moments and good laughs. Thanks for the good time
😊 thanks!
Awesome work. Can't wait next epispd . 👍
PLEASE make more videos, I love your design walkthrough and style my man
it's always lovely to see machinery get the love they deserve, to be honest my school needs to do that too. recently i was working with a lathe, nothing stressfull on the machine as we always made small parts for a little 4 cilinder engine this year but the lathe just began smoking from the engine coming out of the housing so i got a warning board and hung it up on the lathe and told my teacher so it could get looked at. schools always seem to neglect their conventional machines in comparrison to the fancy CNC ones.
They're all maintained by staff at our campus i think but the cnc may also be maintained by contractors. I'm not 100% certain on that though but it would make sense
i was a machine rebuilder back in the 80s and it was fun watching you fuss. i was also a scraper if you know what that is... and assessed machines at pratt n whitney such as jig bores and griddleys. good times!
Thank you for theses videos. My pop was a millwright/machinist. i miss the smells of the shop. I can hear and smell his shop when I watch your videos. They used to call my pop 'golden hands', but he couldn't teach, so I don't have his touch. watching your vids takes me back. you are doing everything he did, but with narration. Thanks
I really like seeing the shop upgrades. Keep up the good work.
Ahh!
Been waiting for this video!
This is so stratifying!
I really love how you improved the quality of your videos. You seem much more confident behind the camera !
As always a great video
Just takes a little getting used to 😊 thanks!
@@InheritanceMachining you're doing great 💪
the little skits in this video make it so much better
Great install! Thanks.
So... this video was the first one I watched... and 3-4 days later, I've now gone back and watched all of your videos!! Keep up the content. I'm loving all of it!!
Thanks a lot, man!
I love watching folks take care of their tools and machines. 😀
Excellent work 👍👍👍. Thank you for sharing. Be safe 🇨🇦
Absolutely knocked all those issues out of the park. Very satisfying to see them all rectified.
Thanks!
Just a little idea from an industrial tech. I would suggest putting the disconnect on the side to eliminate the wire running the door, you pinch a wire in the door you have a hot door until the breaker trips…. If that painted ground stud actually trips the breaker…
Amazing amazing video. Always so pleasant and relaxing to watch your stuff. Love the jokes and the acting. Every video you try something new, and you make it work so well.
I am grateful for this video. You made me realize that I can no longer put off something important that I should have done some time ago. Your machine maintenance exercise applies to everyday things about the life. The image of the rubbish was compelling. Great¡¡¡ Really thanks
happy friday. look forward to hearing from your shop every week
😁
For the last 2 weeks I have been doing what I call tying up loose ends. When you add all the loose ends up it does take time but like you said they must get done so grit my teeth and wait to start the next project. To me it is all about keeping focused. At my age I can need a screwdriver and the next thing you know I want to start building a new room to keep all the screwdrivers in. lol You always do fantastic work and I try not to miss any of your videos.
Got some experience in drilling concrete and the fact you were able to drill those huge holes with such a small cordless drill, damn that concrete is soft 😀
Excelent video, as always, this channel became my favorite manual machining channel 👍🏻 thx for the awesome content
Your videos give me some This Old Tony feels, and now I have two channels that I can relax to after a long day at work!
Great.side project! You do such a great job of describing you thinking and reasoning, and it's just a joy to follow along.
I also appreciate the outtakes at the end 😄
😀 I really appreciate that, man! Thanks!
Epoxy anchor is a BLAST!
LOVE IT !
Especially when you live in a hous with old bricks!
Great work mate
Love your content and watching you grow as a machinist. I am also "self taught" going on 11 years now. I'm glad you went back and leveled the machine even though you said it wasn't important. IT'S VERY IMPORTANT. The oil will run to the low side of the machine and will also cause uneven wear on the ways. Especially important to have the surface grinder level. Also with regards to anchoring the mill to the ground I've seen arguments for and against it. It'll make your machine more rigid but if there ever was an earthquake (however unlikely) it could destroy the base casting/floor. I just have mine on leveling feet because I've changed the shop layout too many times when I acquire new equipment. Just some thoughts I had, keep up the great content and growing as a machinist! Cheers
As always great video! Definitely my favorite TH-cam channel!!
I love all the regular machining vids. However the shop fixxes/infrastructure ones are absolutely my favorites!!!
When you took that little bit off the front left block and the rocking went away, dude that was so cool.
What a wonderful video Brandon, i loved it, especially the comedy and bloopers at the end. I cant wait to see you do more side projects to clean and fix all the tooling in the shop. I know you have boxes under those benches that you havent used and im curios to find out what they hold and the lessons and projects we can learn from them.
I am absolutely amazed by the amount of effort that you put into making your videos. Not to mention how you keep track of what you do and still film it and have something to say AND joke about it AND everything staying perfectly chronological. If a perfectionist don't find your videos appealing, then they clearly have a problem.
I really appreciate that! I put a ridiculous amount of planning into these!
I've said this before here, but I just love watching you develop your voice. It's as much fun as seeing your work, especially as you have grown more comfortable and relaxed and let more humor into your work. Superbly done!
thanks a lot! That's been one of the hardest parts for me. I've never been much of a speaker
I am mostly IT/electronic/electric type of guy, but your videos have something... i can't stop watching your pursuit for precision and details finishing, that is magical.
Loved how you combined electrical, mechanical and even machining solutions all in one vid. Very realistic as to real-world problem-solving in the shop. Out-takes crazy, too!
😁 Thanks and very true. I often enjoy the broad projects like this. Especially when they put me slightly out of my comfort zone!
This looks very satisfying. Enjoyed the end bloopers :)
You were very lucky that you didn't have to replace the CVT sheave sleeve bushings. That mill is in wonderful condition. Though not a practical modification with the rolling frame underneath, Barry mounts are an extraordinary system for small to medium size machinery and so precise with even a bit of isolation from other shop vibrations, which are more critical on grinders. Many shops I have worked at have somewhat unstable concrete flooring due to natural foundation shift. The Barry mounts are fully adjustable to fine tune the level in minutes. Great video and thanks.
I’ve been waiting for this one!!