Making the PERFECT* Slitting Saw Arbor || INHERITANCE MACHINING

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 พ.ค. 2024
  • If you want something done right, sometimes you have to do it yourself. In this project I’ll be engineering and machining an improved slitting saw arbor to replace the bargain barrel piece of junk I bought a while back. Which should be a pretty simple project honestly… but of course I’m incapable of keeping things simple. I’ll include a standard R8 taper making it compatible with my mill’s spindle. But the other end will be a little more interesting. It’s designed such that it can adapter to a wide range of slitting saw blades with different sized holes. Do I have blades with different sized holes? No… but I might one day. Anyway, this does present somewhat of a challenge to keep several assembled parts as concentric as possible. So some precision machining is in order. Including some turning on the mill, as well as my first foray into trepanning. Like I said… I’m incapable of keeping things simple.
    Get the drawings for this project here: inheritancemachining.com/?pro...
    #inheritancemachining #machineshop #hobbymachinist
    Drawings Store - inheritancemachining.com/?pro...
    Patreon (Early Access + Ad Free + Drawings) - / inheritancemachining
    Instagram - / inheritancemachining
    Website - inheritancemachining.com/
    Merch: inheritance-machining.mysprea...
    Amazon Storefront (affiliate links): www.amazon.com/shop/inheritan...
    Thank you again to the Micrometer level Patreon members listed at the end of the video!
    TIMESTAMPS
    0:00 Buy Cheap, Buy Twice
    2:47 Or Design Your Own
    4:27 Not STRAIGHTforward
    6:38 "R8" My Play on Words
    8:46 By the Mill, For the Mill
    10:06 Lathe 2.0
    13:25 Watch Your Step
    15:37 Trepuhning? TREEpanning? TrePANning!
    18:14 Where There's One, There's Many
    19:35 The Eentsy Weentsy Centering Boss Retaining Pin
    20:23 Is it Actually Better?
    FAQ
    Drafting Equipment (affiliate links): amzn.to/3P0HvMe
    A/V Equipment (affiliate links): amzn.to/3Pi45jB
    Editing: Final Cut Pro X
    Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
    www.epidemicsound.com/track/S...\
    • Making the PERFECT* Sl...
    © 2023 Inheritance Machining, LLC. All Rights Reserved.
  • วิทยาศาสตร์และเทคโนโลยี

ความคิดเห็น • 1.2K

  • @InheritanceMachining
    @InheritanceMachining  ปีที่แล้ว +389

    The old saying needs amending.... "Buy Cheap, Buy Twice. Or just make your own!". Thanks for watching everyone! I've got something a little different in store for March 17th. See you then!

    • @xXVintersorgXx
      @xXVintersorgXx ปีที่แล้ว +7

      Buy once, Cry once. Outstanding work again. Look forward every week to these videos not only for your machining but your outstanding camera work and narration

    • @OB1canblowme
      @OB1canblowme ปีที่แล้ว +3

      I would assume the reason the surface finish went in the toilet when turning the centering boss is that your DOC was too low. In general you want a DOC to be equal to or higher than the corner radius of the insert or the insert will tend to deflect radially, producing chatter. For this very reason we who program CNC-lathes tend to finish narrow tolerance features with a finish pass in the order of 0.5-2mm for this size part

    • @OB1canblowme
      @OB1canblowme ปีที่แล้ว +4

      I'd also recommend you keep that trepanning tool you ground on hand as a general outside turning tool for plastics. The geometry you used with the chip breaking feature is awesome for plastics if you don't have PCD or MCD inserts on hand

    • @Homiejahcobie4004x
      @Homiejahcobie4004x ปีที่แล้ว

      Why does your comment say 10 days ago?!
      And what kind of table is that? The one you make your blueprint on. Was it made special or are they made by a company?

    • @da54177
      @da54177 ปีที่แล้ว

      Your videos are getting better by the day. Love your work!

  • @smartereveryday
    @smartereveryday ปีที่แล้ว +694

    I love your videos.

    • @InheritanceMachining
      @InheritanceMachining  ปีที่แล้ว +104

      Thanks, man! I really appreciate it

    • @CM-xr9oq
      @CM-xr9oq 10 หลายเดือนก่อน +36

      ​​@@InheritanceMachiningi can see the ThisOldTony influence in your editing and voiceovers

    • @TheGoldenTNT
      @TheGoldenTNT 10 หลายเดือนก่อน +19

      Literally everyone loves this channel.

    • @gdude2775
      @gdude2775 10 หลายเดือนก่อน +17

      ​@@TheGoldenTNTI've seen so many of my favorite TH-camrs in his comments

    • @San-.-
      @San-.- 5 หลายเดือนก่อน

      ​@@gdude2775same. Even colin furze

  • @musabayaz9
    @musabayaz9 ปีที่แล้ว +534

    So calming to watch him make parts with such precision. A person who loves what he does.

    • @luke-guitarist
      @luke-guitarist ปีที่แล้ว +2

      It is very satisfying and relaxing!

    • @OdysBrother
      @OdysBrother ปีที่แล้ว +2

      True

    • @HarmonyFullilove
      @HarmonyFullilove ปีที่แล้ว

      @@luke-guitarist 😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

    • @isminivermekistemeyenmahmut
      @isminivermekistemeyenmahmut ปีที่แล้ว

      Aynen

    • @almaefogo
      @almaefogo ปีที่แล้ว

      It's so good that I fall asleep if I'm in bed, I don't listen to audiobooks but I know that people would love him.

  • @matthewdebeer8453
    @matthewdebeer8453 ปีที่แล้ว +428

    The new camera gantry seems to be working perfectly! Love the shot at 11:20

    • @InheritanceMachining
      @InheritanceMachining  ปีที่แล้ว +120

      It's getting a lot of use, thats for sure. And by a lot, I mean all 😂

    • @tonyfnd
      @tonyfnd ปีที่แล้ว +3

      Was going to make the same comment. 🤘🏼🤘🏼

    • @julialasseguarde5798
      @julialasseguarde5798 ปีที่แล้ว +2

      so much this!

    • @larrybud
      @larrybud ปีที่แล้ว +5

      @@InheritanceMachining What do you think the time savings has been?

    • @IAmUndersteer
      @IAmUndersteer ปีที่แล้ว +4

      It’s the shot at 20:48 for me. 😮‍💨

  • @mattiasfagerlund
    @mattiasfagerlund ปีที่แล้ว +5

    Trepanning is also the term used for drilling a hole in someone's skull, either to relieve pressure in the brain pan or more commonly (historically) to let demons out. I'm glad that that kind of trepanning isn't your new favorite operation... Oh, and yes, people would actually survive having a hole drilled in their heads.

  • @mattmays9063
    @mattmays9063 ปีที่แล้ว +174

    I just had to take a moment to express how much I've been enjoying watching your videos. Seeing you take on your grandfather's machine shop with such enthusiasm and passion is truly heartwarming. It's clear that you have a deep love for engineering and machining, and it's been a joy to watch you apply those skills to a hobby that means so much to you.
    What I appreciate most about your videos is how you take us on a journey of discovery with you. We get to see firsthand how you navigate the challenges of working with unfamiliar tools and techniques, and how you approach problem-solving with such a positive attitude and willingness to learn. Your willingness to share your mistakes and show us how you correct them on the fly is a valuable lesson for anyone, regardless of their skill level.
    Watching your channel has been a unique and truly wholesome experience. It's so refreshing to see someone take on a seemingly secondary skill and turn it into something so special. You've created a truly unique viewing experience that is both entertaining and educational.
    Thank you for sharing your journey with us. It's such a pleasure to see someone succeed so exceptionally where others might give up or fail. I cannot stress enough how happy it makes me to see you living your passion and achieving such great things. Keep up the amazing work, and I look forward to seeing what you create next! Sincerely, just another Savage, TOT, Abom and Fireball Tool..........etc fan.

    • @InheritanceMachining
      @InheritanceMachining  ปีที่แล้ว +34

      Thank you so much! I've been dreaming of the day I could get back into a shop and make things. I couldn't think of a better way of sharing the process of learning and relearning old skills than by showing everything from the ups and downs, to the experimentation and side projects. All made better by the support of kind folks like you. Thanks again!

  • @Lukeredacted
    @Lukeredacted ปีที่แล้ว +191

    Man that new camera gantry is amazing. The shots in this project feel so much more free! Great variety of angles now that you're not limited by tripod setups.

    • @InheritanceMachining
      @InheritanceMachining  ปีที่แล้ว +33

      I was going camera crazy! 😂 Thanks!

    • @Lukeredacted
      @Lukeredacted ปีที่แล้ว +5

      @@InheritanceMachining Now I'm awaiting the inevitable day that you decide to go super-saiyan and add another camera + gantry into the mix to get 2x the coverage (ex, wide and close-up shot).

  • @finchworks7956
    @finchworks7956 ปีที่แล้ว +6

    "Nothing like a side project before you've really got started". The story of my life!!
    My motto: "Nothing is easy". Great video.

  • @bmj3187
    @bmj3187 ปีที่แล้ว +51

    I'm not going to lie, as a mold making apprentice, this man's workmanship is something I really hope to achieve at some point in my career lol

    • @This4andrew
      @This4andrew ปีที่แล้ว +2

      Welcome to the trade. All great Mold makers have terrific workmanship. It take time and patience.

  • @LimitedGunnerGM
    @LimitedGunnerGM 6 หลายเดือนก่อน +4

    I’m rewatching older videos… they don’t get old.

  • @roburner8762
    @roburner8762 ปีที่แล้ว +95

    Your videos are some of the few I don't speed up. Thanks for sharing with us!

    • @LaxianKey1
      @LaxianKey1 ปีที่แล้ว +1

      My feelings exactly.

    • @EnricoMarangonJunior
      @EnricoMarangonJunior ปีที่แล้ว +4

      yeap... normal speed with sound. Rare are the videos that fall into this realm. Here all of them.

    • @braxeton671
      @braxeton671 ปีที่แล้ว +3

      Fr. his commentary is not boring at all and relevant to what he is doing always 👍

    • @EnricoMarangonJunior
      @EnricoMarangonJunior ปีที่แล้ว +7

      @@braxeton671 And no silly "milenial jokes" 🧐 we old people like information.🤠

    • @braxeton671
      @braxeton671 ปีที่แล้ว +1

      @@EnricoMarangonJunior lol

  • @samueltejedaiglesias878
    @samueltejedaiglesias878 ปีที่แล้ว +70

    As an engineer I really enjoy watching your videos when I'm stressed, keep up with the good work!

  • @paulgreenlee190
    @paulgreenlee190 ปีที่แล้ว +5

    I was very impressed with your story and journey. My wife's grandfather was a welder and machinist and had a little shop in Clearwater Florida. It was jam packed with just about anything you could imagine. Most from WWII surplus. He taught me how to weld and a little about machining. Now I'm 71 and just bought a lofted garage 14 x 20 fully insulated and just put A/C in. I have a 13" South Bend and trying to figure out how to get a milling machine. As soon as I saw you sit down and draw I knew you were an engineer. I'm going to buy some shirts from your store. I hope you continue to grow and create projects; I need to buy some of your drawings as well. God Bless and thank you for sharing. Paul Greenlee

  • @rets4072
    @rets4072 ปีที่แล้ว +4

    "that's a problem for future Brandon" wow I do the same thing, crazy how skilled our future selves are!

  • @rafael9646
    @rafael9646 ปีที่แล้ว +46

    I love the "Buy Cheap, Buy Twice. Or just make your own!" motto, at the workshop there's always something to do and when there's spare time to do side projects you're just burnt out, I've always dreamed of making my own tools, Very nice work!.
    11:33 that edge looked burnt already.

  • @urdnal
    @urdnal ปีที่แล้ว +8

    I hope your grandpa got to see your abilities, drafting, engineering manufacturing etc, before he passed.
    Wholesome gets tossed around a lot online these days but it’s wholesome how you connect to him through putting these tools to use. Family matters so much and it’s a blessing to have good relationships like that.

    • @InheritanceMachining
      @InheritanceMachining  ปีที่แล้ว +10

      Unfortunately he did not, but I like to think he's watching in on my doings. Thank you 🙏

  • @localele1
    @localele1 ปีที่แล้ว +7

    The nice thing about precision is it keeps on giving.
    When you now sharpen the slitting saw and get all it's teeth cutting you will be amazed at how good machining can really be.
    If you can go from having 6 of the 36 teeth cutting to something more like 30 of the teeth cutting on the same diameter things get real smooth.

  • @paradoxx_4221
    @paradoxx_4221 ปีที่แล้ว +6

    exactly the right timing for a friday afternoon

  • @patrickfrancisobrien532
    @patrickfrancisobrien532 ปีที่แล้ว +1

    I just discovered this channel. No hamming it up in front of the camera, no brand promotion, no irrelevant dialogue and no horse laughing. Fitting and turning, machining, engineering and hand drafting done with a professional touch and a tad of humor. Quality stuff. Your grandfather would be proud. Luck would have it he has a grandson with a genuine interest in his legacy.

  • @denniswil1
    @denniswil1 ปีที่แล้ว +37

    It amazes me that you don't have more subs. All of the videos are excellent. Watching raw material get transformed into works of art with precision.

    • @InheritanceMachining
      @InheritanceMachining  ปีที่แล้ว +4

      Thank you 🙏

    • @dtnicholls1
      @dtnicholls1 ปีที่แล้ว +3

      He's only been here 10 mins.
      Give him a bit.
      And realistically, they're the lucky ones.... They're going to have an awesome back catalogue to make their way through.

  • @jeffreycaves2756
    @jeffreycaves2756 ปีที่แล้ว +22

    Brandon's channel is by far one of my favorite channels. All my friends I have shown tell me they dived down the rabbit hole quickly, and binge everything. Keep up the amazing work Brandon. You have been inspiring watching your journey from concept to final outcome.

  • @liamsmith8518
    @liamsmith8518 ปีที่แล้ว +5

    I loved that plot twist at the end and all the shots from the new gantry are incredible, I can't wait to see more projects shot with it

  • @marthinwurer
    @marthinwurer ปีที่แล้ว +1

    Man, the box of shame bit at the end just hit right.

  • @criznach
    @criznach 10 หลายเดือนก่อน +1

    That drafting arm takes me back to high school. Before CAD. Love it!

  • @ElixirCNC
    @ElixirCNC ปีที่แล้ว +3

    At around 14:00, The reason why a 0.001 pass leaves a bad finish is because the corner radius on the carbide insert allows the part to be deflected radially. Taking a depth of cut greater than corner radius of the tool means you'll have most of the cutting forces directed axially. Joe Pie has a video where he makes an aluminum toothpick, it demonstrates how direction of the cutting forces matter.

    • @doesitmatter1667
      @doesitmatter1667 6 หลายเดือนก่อน

      Going to check that out now.

  • @brucematthews6417
    @brucematthews6417 ปีที่แล้ว +5

    I've been contemplating my own R8 shank slitting saw arbor for some time now. I just tossed out my own ideas in favor of your design. I like how you used the added reach to house the sliding step adapter. Brilliant! And so much better than those sloppy commercial designs.

  • @CDR_Droid
    @CDR_Droid ปีที่แล้ว +1

    It's cool to know that this is now (probably) all filmed on a new and more convenient camera system rather than one tripod with telescopic locking legs.

  • @mushroomtoaster2436
    @mushroomtoaster2436 ปีที่แล้ว +1

    I think this was the best subtitle I’ve seen yet.

  • @llong8976
    @llong8976 ปีที่แล้ว +4

    I’m no machinist and have never tried but I’d like to say that your videos are easy to understand and follow even when you use machinist terminology. Keep up the great work.

  • @pmcquay1
    @pmcquay1 ปีที่แล้ว +3

    4 seconds after posting! I dont think I've come any closer than that!

  • @manmachinemake3708
    @manmachinemake3708 ปีที่แล้ว +1

    Every slitting saw/arbor I've ever used has runout, period ! Your example is far superior and is one i will be making.

  • @mattfleming86
    @mattfleming86 ปีที่แล้ว +2

    I appreciate the fact that the more time you spend in the shop, the more you embrace "good enough"
    Perfection is great to keep in your mind.. but it truly is unobtainable. It's nice to focus on making something perfect in the ways that matter, but relaxing a little in the ways that don't. I'm sure some really talented machinists went out of business because they were TOO dedicated to perfection, while others can produce a perfectly functioning part in a reasonable amount of time.

  • @FNmey
    @FNmey ปีที่แล้ว +4

    Really nice! I don't have a mill yet but this would surely have come in handy this week (made some locking collars as drillstops and ended up 3d printing them)

  • @bhandlon
    @bhandlon ปีที่แล้ว +10

    Going from what you had to what you created is so awesome to watch ! Good work as always

  • @rickpalechuk4411
    @rickpalechuk4411 ปีที่แล้ว +1

    It works! It really works! Next side project Doc, Mr Fusion!
    Cheers

  • @slygg
    @slygg ปีที่แล้ว

    Don't know why I keep watching these. I'm a computer scientist. Haven't worked a day with my hands in my life. Don't know what you're saying 1/3 of the time. Still absolutely love it.

  • @soliloquym5473
    @soliloquym5473 ปีที่แล้ว +7

    Always a joy and pleasure to watch you make some truly incredible tools. the precision and care you take with all your machining steps also really tickles the OCD perfectionist in me. keep up the great work man!

  • @jeffpitzer8521
    @jeffpitzer8521 ปีที่แล้ว +9

    Man I love your channel! It is becoming my favorite and I'm subscribed to a lot of channels and a lot of machining channels. I am anxiously awaiting the next video. As a hobby machinist you inspire me to strive for higher accuracy and precision. Keep up the great work both filming and machining!

  • @greggminkoff6733
    @greggminkoff6733 ปีที่แล้ว +1

    As an old retired Machinist, your design and your work is exceptional.
    I would recommend parkerizing or a black oxide finish to preserve your hard work.
    👍👍👍👍👍👍👍👍

  • @LukeTrundell
    @LukeTrundell ปีที่แล้ว

    I love hearing people with american accents using british sayings, that utterance of "Bugger up" sent a smile straight to my face 😂 another reason i absolutely love this channel 😁

  • @AllThingsMech
    @AllThingsMech ปีที่แล้ว +3

    Another masterful video. Top notch machine work, editing, and camera angles as usual. One of the few channels on TH-cam that I derive genuine joy from watching, every time. Thanks for all of the effort you put into this - your success is well and truly deserved!

  • @karlhounslow8503
    @karlhounslow8503 ปีที่แล้ว +4

    I am constantly impressed with your attention to high precision accuracy and detail. I am loving the videos and it’s great that you take the time to provide good commentary also as the video progresses. The little moments of humour are a nice touch! Although I am not an engineer, machinist or even close to that your videos and projects have stirred an interest of such things in me which has been dormant for years. So thank you and please keep going. Your family I am sure are very proud of what you are doing and have done 👍🏻

    • @InheritanceMachining
      @InheritanceMachining  ปีที่แล้ว +1

      Thank you so much! It's never too late to get into something new.

  • @mechaform
    @mechaform ปีที่แล้ว +1

    Spat my coffee out when you spun up the “bargain” arbour during the intro. Was NOT expecting that much eccentricity.

    • @InheritanceMachining
      @InheritanceMachining  ปีที่แล้ว +1

      😂 Don't worry I true it up better than that when I actually needed to use it

  • @christurnbull8099
    @christurnbull8099 ปีที่แล้ว +1

    That smile when inspecting the results of your hard work was perfection

  • @liveroundsgaming2359
    @liveroundsgaming2359 ปีที่แล้ว +3

    I've never used a mill or lathe but your videos are truly inspiring and I hope that I get to try it out one day.

    • @InheritanceMachining
      @InheritanceMachining  ปีที่แล้ว +2

      It's pretty satisfying. Even for someone who's done it a lot. I highly recommend it! Thanks

  • @JoshuaDHay
    @JoshuaDHay ปีที่แล้ว +20

    Hey Brandon, another great build! As an aspiring machinist I’ve always wondered where people source their material and supplies (that is what you don’t already have in the shop😉) if you don’t mind me asking, where do you buy/get yours? Thanks for sharing !

    • @cranelord
      @cranelord ปีที่แล้ว +9

      A lot of machine/fab shop will have off cuts they sell to people. Try calling around to local shops or metal suppliers and ask what they have available.

    • @troycongdon
      @troycongdon ปีที่แล้ว +9

      For shops making money there are metal suppliers. Usually these kinds of suppliers are near an industrial area of a city. If you are making hundreds of thousands of large “things” you can go to directly to the mill and specify an alloy. For those of us working home shops, there are a number of internet suppliers. Metals Supermarket, Online Metals, Speedy Metals, McMaster-Carr, Amazon and eBay are all places I have sourced small quantities of specific alloys/shapes.

    • @InheritanceMachining
      @InheritanceMachining  ปีที่แล้ว +11

      Thanks! For things I don't have I usually go McMaster-Carr. It's not the cheapest, but in most cases it's the most convenient and fastest to get

  • @WeGoWalk
    @WeGoWalk 4 หลายเดือนก่อน

    Okay. So I’ve watched every single video in your channel, and even binge-watched several in a row recently, and now I’ve completely run out of videos of yours to watch, so now what do I do? I’m now re-watching all your videos all over again, from the beginning…and I’m not even a machinist! If anybody on TH-cam should be given an award for knowing how to make captivating videos, it’s you. If I weren’t so bad at math, I’d pay you to teach me machining because you present the machinist skills so incredibly well that I find them almost Mesmerizing. With how well you present machining and your wonderful voice and captivating delivery, I’d say you’re the David Attenborough of the machining world. Keep up the great work (and keep those videos coming!)

  • @Ghost_Of_Halo
    @Ghost_Of_Halo 9 หลายเดือนก่อน

    i've watched this video like 4, 5 times now, still haven't gotten boring

  • @SweetTooth8989
    @SweetTooth8989 ปีที่แล้ว +8

    Well done. Turned out very nice. I actually have one of those import slitting saw arbors and seem to have gotten lucky because it turns very true and so does the blade.
    You might want to machine some hex flats on the locking nut though, or at least i had to because after using it, it would lock up so tight I had a hard time undoing it with an allen wrench without partially stripping the bolt head.

    • @InheritanceMachining
      @InheritanceMachining  ปีที่แล้ว +1

      You lucky dog! haha I'll have to see if the cap locking becomes and issue. I don't have much material left to cut a flat into on that area.

    • @buckinthetree1233
      @buckinthetree1233 ปีที่แล้ว +1

      Yes, I have an arbor and saw that is now a one-piece design because the Allen screw is stripped. It wasn't an accidentally bone head mistake that it's stripped. It was the second time I used it when the socket head retaining screw welded themselves into the arbor. I knew full well the hex socket was going to strip, but I knew that if it wasn't going to loosen with the amount of force I was using that I would be drilling it out anyway.

  • @kimberlycrisler6834
    @kimberlycrisler6834 ปีที่แล้ว +5

    Did your new filming setup enable you to shoot new angles, or just make the overall filming easier? As always-thanks for sharing! 😁

    • @InheritanceMachining
      @InheritanceMachining  ปีที่แล้ว +5

      It was WAY easier. And definitely some new angles I couldn't get before. Thanks!

  • @billgilbride7972
    @billgilbride7972 8 หลายเดือนก่อน

    This episode was Chock Full of Cuts ! Plus the R8 in me was naturally drawn in. Thanks!

  • @lukedegannes7631
    @lukedegannes7631 ปีที่แล้ว

    That ending was great. Can never escape a good side project😂

  • @spiralingspiral72
    @spiralingspiral72 ปีที่แล้ว +3

    You should try drafting in ink (5).

  • @jetegtmeier71
    @jetegtmeier71 ปีที่แล้ว +4

    My Dad always warned me when grinding a tool to avoid it turning gold or blue by constantly dipping it into water to cool it as that would take the temper out of it. Your thoughts ? also when you checked the runout on the blade was it a new blade or one that you ran in the junk arbor as prior use in the junk arbor might have altered the blade itself :)

    • @InheritanceMachining
      @InheritanceMachining  ปีที่แล้ว +3

      There might be something to that. As it is basically annealing after all. I'm pretty sure the blade I tested with was never used. Others are suggesting that is normal so a progressive cut can be achieved.

    • @markshort9098
      @markshort9098 ปีที่แล้ว +2

      The old don't let a tool get hot enough to change color is a left over from when cutting tools were made of carbon steel, high speed steel doesn't care about heat and you can even heat it up glowing red and bend it and just let it cool naturally and it'll still maintain it's hardness

    • @jetegtmeier71
      @jetegtmeier71 ปีที่แล้ว

      @@markshort9098 Thanks, I did not know that :)

    • @markshort9098
      @markshort9098 ปีที่แล้ว +3

      @@jetegtmeier71 i should have added that it is possible to anneal high speed steel but it has to be red hot for a long time

    • @jetegtmeier71
      @jetegtmeier71 ปีที่แล้ว +1

      @@markshort9098 It just goes to show you never stop learning :) thank you for sharing your knowledge :)

  • @ianjones9961
    @ianjones9961 8 หลายเดือนก่อน

    Why am I watching this?? Why do I KEEP watching these? I have never set foot within a mile of a machine shop. This has no bearing on my life whatsoever.
    ...WHY CAN'T I STOP WATCHING THESE?!

  • @BlackringIII
    @BlackringIII ปีที่แล้ว +2

    There was more to this build than I expected! It turned out beautiful in the end, both aesthetically and functionally.
    That twist ending though 😂

  • @jlett24
    @jlett24 8 หลายเดือนก่อน

    This makes my overly OCD perfectionist soul happy... like way too happy to describe on youtube. Thank you.

  • @arturohernandez257
    @arturohernandez257 ปีที่แล้ว +2

    I just wanted to let you know that your channel is the reason I changed my major back to mechanical engineering. Your videos reminded me of the joy I felt not only learning everything I did from my grandpa and uncle, but the joy I felt from working on my own projects, seeing the fresh chips flying away from the cutter, and making any & all tools I wanted or needed. I just wanted to say thank you so much for reigniting the spark of passion for this career, from the bottom of my heart, thank you. I can't wait to see your next project, and I wish you nothing but the best for it.

    • @InheritanceMachining
      @InheritanceMachining  ปีที่แล้ว +1

      That's awesome, man! I'm glad I could be an inspiration! Thanks

  • @stevenbierlink6695
    @stevenbierlink6695 ปีที่แล้ว

    That last 10 seconds was GOLD 😂

  • @PiDsPagePrototypes
    @PiDsPagePrototypes ปีที่แล้ว

    Add this saying, "A lazy man will find the most efficient way". Dad used to use it all the time, when streamlining the way he worked in his workshop, rather then doing more steps then what was needed, or using more material then needed.
    Saving yourself money by making it yourself, has produced a tool that would have cost thousands of dollars to buy, plus given you extra tools from the side projects.

  • @SeaniepGdizzle
    @SeaniepGdizzle ปีที่แล้ว

    I wish I could properly articulate the joy this channel brings me. I can't wait to see you fix that problem.

  • @davytimns
    @davytimns ปีที่แล้ว +1

    As an engineering student, these actually help me figure out how the parts I design will be manufactured.

    • @Barty.Crowell
      @Barty.Crowell ปีที่แล้ว

      My dad's an engineer and after I started machining, I gained a lot more respect for him when I found out how much he pays attention to how his designs get made. I've cursed engineers more times than I can count but he and Brandon are the exceptions

  • @JasonKrasavage
    @JasonKrasavage หลายเดือนก่อน

    I’m so glad I found this channel!

  • @collinsmith9941
    @collinsmith9941 ปีที่แล้ว +2

    I’m not quite sure what it is but this project was definitely one of my favorites to watch.
    Awesome job.

  • @theradioweyr
    @theradioweyr ปีที่แล้ว +2

    Such precision and attention to detail makes me think things are right in the world.

  • @ingentingbra
    @ingentingbra ปีที่แล้ว

    Whiskey in the glass, family sound asleep. And another epic episode of Inheritance machining.
    Congrats on 200 k subs! Well deserved.

  • @taxivader6426
    @taxivader6426 ปีที่แล้ว

    I knew you were good, but seeing that thing spin up so perfectly true at 10:06 is really something else

  • @aserta
    @aserta ปีที่แล้ว +1

    If you haven't thrown the cheapo one, then delete the pip off, enlarge the hole to get rid of trueness issues, and make a cap that's also the bolt. But make the disc flange 2.5~3 mm thick for a low profile cut. Could be useful to get over features and it wouldn't cost you more than an hour to do it all. I have several of these cheapo ones that i've converted for different blades that were either with defects or non standard sizes and they're great for just grabbing off the shelf, no blade change, just plug and play. If you do the can and bolt in one, the rigid nature will allow you to run bigger blades too, near table saw sizes (if, you feel comfortable with such a size) which allow you to get into really deep features and also, owing to the large diameter, slow down the cut a lot.
    All that jamble said, you've created yet another cool tool for the shop. Awesome!

  • @cogentdynamics
    @cogentdynamics ปีที่แล้ว +1

    I learned a lot from the between centers turning. Not sure I have done that since high-school 50 years ago. Thank you.

  • @artszabo1015
    @artszabo1015 ปีที่แล้ว

    Once again the end product looks like jewelry. I am an old old school machinist from the day that all tooling was cobalt or HSS and they mounted in an Armstrong holder in a lantern style toolpost or home made fly cutter. Most of the lathes I ran were conversions from flatbelt days and had truck transmissions rigged on them. A Lima drive, carbide bits and indexing tool holders were cutting edge. It took me years to polish my tool grinding skills and I am amazed at your tool grinding expertise. If you ever wonder how you would measure up to the machinists of your grandfather's day, let me absolutely assure you that you are just as brilliant, resourceful and creative as any I have ever seen. Your grandfather can rest in peace knowing that his machinery is in your truly deserving hands. I am also amazed at your comfort and skill on that old school drafting board. I learned on one just like that back in the early sixties. I want you to know that I despise slander and flattery is just the other side of a bad coin. This not flattery, you truly deserve these flowery words.
    Art from Ohio

    • @InheritanceMachining
      @InheritanceMachining  ปีที่แล้ว

      That is extremely kind, Art! Thank you so much! And thanks for sharing. I would have loved to work in an older machine shop like you did.

  • @voodoochild1954
    @voodoochild1954 ปีที่แล้ว

    I just have to add what a beautiful job. Your grandfather would be proud.

  • @RickSolid1
    @RickSolid1 ปีที่แล้ว +1

    That trepanning finish was seriously gorgeous, I said Woah just as you were complimenting it.

  • @krikon3314
    @krikon3314 ปีที่แล้ว +1

    You really got me! I was looking forward to see it in use but there were no signs that you would be testing it and all of the sudden you say thanks for watching, and I really didn’t expect that you would not include the best and most rewarding (for you) part until you revealed the truth…😂😂

  • @mauserkk98
    @mauserkk98 ปีที่แล้ว

    Side projects and no box of shame ..... that's a win .

  • @andrewdolinskiatcarpathian
    @andrewdolinskiatcarpathian ปีที่แล้ว +1

    “Oh yea, that will do nicely” 👏👏👍😀

  • @THEOGGUNSHOW
    @THEOGGUNSHOW 10 หลายเดือนก่อน

    That's some meta-level attention to detail Sir. I love seeing people take mundane everyday objects and turn them into masterpieces.
    "John Lennon once said, 'I'm an artist 🎨, give me a tuba and I'll get something out of it.'" -The Departed, Jack Nicholson

  • @Scrildo1
    @Scrildo1 หลายเดือนก่อน

    It’s so relaxing listening to you and watching you draft up your plans. Bob Ross level soothing great videos man!

  • @brantonbeall9061
    @brantonbeall9061 ปีที่แล้ว +2

    I really enjoy seeing an engineer putting their ideas to work and especially refreshing to see your mistakes as well as your gems. Thanks for including me in your journey, always looking forward to seeing your next post.

  • @t.d.mich.7064
    @t.d.mich.7064 8 หลายเดือนก่อน +1

    I always used Pre-hardened 4140 for making tool holders that needed extra strength for milling or turning. Strong and takes a nice surface finish

  • @keithhansen3963
    @keithhansen3963 ปีที่แล้ว

    Brandons birthday- 8" buffer w/stainless wire wheel on one side, scothbrite wheel on the other. Anniversary -Horizontal bandsaw
    I remember buying one of those slitting saw arbors(staraight shank style but the same cheezy chinese multi type) 15 years ago. I had a hell of a time cutting until I finally realized the runout. Great project, perfect series of machining techniques. Grade=A+

    • @InheritanceMachining
      @InheritanceMachining  ปีที่แล้ว

      Sounds like you've peaked at my wish list 😂 Thanks as always, Keith!

  • @fzriow
    @fzriow ปีที่แล้ว

    The highest review I can give is that this channel is the ONLY channel I have turned the notification bell on

  • @aethertech
    @aethertech ปีที่แล้ว +1

    The box doesn't hate, the box just judges.

  • @brettfontaine4681
    @brettfontaine4681 ปีที่แล้ว +1

    I have always appreciated your machining skills, but I particularly liked the video editing on this one. Sound effects and emojis were on point 😂

  • @kennethjanczak4900
    @kennethjanczak4900 10 หลายเดือนก่อน

    Warm up and old machinists heart to see you make your own tools... Great job
    Thanks for taking the time to make the video and share it.

  • @pattonorr7572
    @pattonorr7572 ปีที่แล้ว +2

    Honey, new Inheritance Machining vid just dropped

  • @ahmadasaad-sq1nu
    @ahmadasaad-sq1nu ปีที่แล้ว +1

    New win !
    Thank you for sharing this
    Art.

  • @TheHercalways
    @TheHercalways 4 หลายเดือนก่อน

    Crazy man, crazy... can't stop listening to you in these Cad/Cam - times, thank you, and thanks to your grandfather.

  • @lagamerfuel9661
    @lagamerfuel9661 6 หลายเดือนก่อน

    Your bolt action pen came on my recommended like a year ago, pretty much a week after it’s upload, I’ve probably watched it 5 times and upon clicking on your channel, I found a treasure trove of engineering and shipbuilding, and no other channel is like yours, love it man keep it up!

  • @mattholden5
    @mattholden5 ปีที่แล้ว +2

    Brandon, beautiful build and lots of informative tips for home gamers. Your stepped index with long support is the way people expect the eBay/Amazon slitting arbors to operate. Thanks for sharing the fundamental defects that make them inexpensive, preventing thousands (or more) of us learning the hard way.

  • @JustTony72
    @JustTony72 ปีที่แล้ว

    There's something so calming about hand drawings

  • @copescale9599
    @copescale9599 ปีที่แล้ว +1

    That is so satisfying to see how true it runs.

  • @Warlearder
    @Warlearder ปีที่แล้ว

    Incredible attention to detail, well done.

  • @nadam35
    @nadam35 ปีที่แล้ว +1

    that is, without a doubt, the truest running slitting saw arbor ive ever seen

  • @jonahbrame7874
    @jonahbrame7874 ปีที่แล้ว

    Without a really high quality saw, at that diameter, that is as good of run out as you could possibly expect! Nicely done!

  • @Dreddip
    @Dreddip ปีที่แล้ว +1

    You did an absolute fantastic job with this neat little project. The pattern the blade is leaving, an entrance and exit cross pattern means you nailed the blade squareness. You should be very proud of this one! Thank you for sharing.

  • @layingthatpipe
    @layingthatpipe 6 หลายเดือนก่อน

    A man that can make his own tools for his craft, can not be stopped!

  • @dcraft1234
    @dcraft1234 ปีที่แล้ว

    Is that your grandpa on the lock-out tag on your DRO? If so, that is a wonderful memento to have. He's always there with you.

  • @bobbymccourt6794
    @bobbymccourt6794 ปีที่แล้ว +2

    Another killer video! And that cliffhanger ending…..Can’t wait for the next vid! One of the best machining channels on YT bar none 👍🏻

  • @Dutchmachineshop
    @Dutchmachineshop ปีที่แล้ว

    it's a pleasure to watch every time you post a new video.

  • @jaylanmcmurtry5317
    @jaylanmcmurtry5317 ปีที่แล้ว +1

    The camera gantry is my favorite build of yours, and I can see it in action in this video. Good stuff.