Dude you do not understand how much of a life saver you are. Just finished getting cfw on my switch and when this happened I thought I bricked it. you actually saved my life.
Thank you so much i watched 2 of your videos to fix my bricked switch after update 17 and it wasn't working at first and then my computer recognized my switch and i got my switch working again thank you again i thought i was out of money as this happened like last year and i gave up and forgot up until recently i heard of a fix but no tutorials whatso ever until i found you and followed the guides thanks again my Pokémon are saved.
Thank you so much for this video. I was going insane trying to figure out why my OFW did not boot, but my CFW did. The last part of your video helped. I genuinely don't know what caused the issue after the latest update, but your solution helped me. I hope you have an amazing life. ❤
Hey dont know if you can give some insight but I am stuck on that Black Screen trying to boot to Stock , Sys , AND Emu- I can still boot to Hekate but trying to boot to anything else just leaves me on a black screen
So I am having the same issued but my cfw-emmuMMC is working perfectly fine. Which is holding the tinfoil and switch games. But my stock sysMMC is giving me the stuck Nintendo logo and then it turns off. Your last step isn’t making sense help
To add more, I did updated to the latest official firmware on my stock sysMMC ever since I did that it has been doing that. I did took out the memory card and used a different one is giving me the same problem. Is this a bug ?
In my situation my switch froze midgame in emummc. Cant boot past nintendo logo on stock, cant get past atmosphere logo when launching atmosphere cfw through hekate menu after inserting payload successfully. Is this a boot loop? I only have two launch options: stock sysnand and atmosphere cfw. Not the cfw stock one you have. Please help as im getting nowhere anywhere ive asked about this 😢
@@csh4288 tried a few things. I ruled it had caused a corrupted NAND as couldn't boot to either sys or emu but I had longterm problems with my battery which when replacing caused my SD card connector pins to be damaged when reattaching. If I didn't have those hardware faults I would of tried to restore my sys NAND and see if things worked from there. I have a replacement switch now.
@@csh4288 Idk if you are still trying to fix this problem but I had the exact same problem and I finally managed to get the cfw to work. However, I'm still trying to find out how to fix my stock sysnand. Keep in mind that I did this without much precautions or backups because I didnt rlly have much to lose but if you do, you will need to take extra steps to back everything up) What I did was first was update my firmware files. You can easily find many videos on how to do that just by searching. At this point, this is where the crucial part begins. I then installed tegra explorer which is a payload injector. I opened up tegra rcm and plugged in my switch with rcm mode on and injected the tegre explorer file. Once I was in, I went to system wipe, which should be at the very bottom. (Keep in mind, as the name suggests, its a system wipe so it's going to wipe everything. I just went along with it because I was getting desperate to finding a solution and I didn't rlly have anything to lose so if you don't want that, look up videos on how to back everything up.) Once I was in, there were 2 options, sysnand wipe and cfw wipe or something like that, I don't remember that well. Either way, you will need to do both of those wipes. Just click on one of them and follow the instructions and when it's done, go back and perform the other wipe. After that, boot back into hekate and launch you cfw and it should work. As I said before, I still haven't found a solution for fixing the stock sysnand. I hope this helps with your cfw though
I removed CFW, used OFW... put it aside for a months... turned it on, forgot about it and during an update from Minecraft it bricked...i only get the Nintendo logo and fades away... Nothing else works... Any ideas?
@RAFAEL11221000 You might want to delete the comment and repost. You put it down as a reply to my comment rather than a new comment. Im afraid I never figured out the answer and less people will see it as replys are hidden unless opened on youtube
Maybe you can help me, my switch will boot into emunand just fine but it won't boot into my ofw normally . When I do try to boot into my ofw through rcm it crashes and I get a error code. How would I be able to fix this issue?
I'm fairly new to this, so this is like the blind leading the blind. 😆 Turn your switch off and then back on. While it's booting, look through the vent holes on the back of the switch. You should see the LED blinking blue, then yellow, and then it will go out and boot to hekate. If it continues to flash yellow or green, the modchip isn't glitching the processor, and you should probably check your solder points. I hope this helps.
Mine will not boot to anything right now. I had to get my sd connector repaired and its been down hill ever since. I can get to hekate though, so maybe thats a start.
Does RCM loader needed ? I just bought physical copy of Persona 5 Royal for my jailbreak switch. I put it in then it doesn't appear on my home menu. It asked me to update the stuff. So, I update it. Now, it open on the logo then stopped working. Based on your video, we have a similar issues but different software (I think). So I wonder that I have to buy RCM loader too to do similar like you Also, if there's a way for me to downgrade the software back to my before broke one, please show to me. I really need it
Help with error code 2002-3450 (0xa1ba802) Hello! I just had my new switch v2 jailbroken using hwfly by a technician at a local store, but it's giving me an error code 2002-3450 (0xa1ba802) when launching games installed through DBI. Also when installing games from DBI, my sd card still shows 115GB/119GB (the technician just installed totk and rdr but still, it doesnt relfect on my sd card )when it does reflect on my sd card and try go launch that game, it will give the error code 2002-3450 (0xa1ba802). The technician said my sd card is corrupted and fake, but i tried 2 sd cards but still the same. Then the technician formatted the sd card to test it again and it boots up to hekate menu but when booting to sysmmc, it will just turn itself off. Please help. I don't know what to do anymore. Any reply will be appreciated. Thank you.
I have V2 console finish mod i can use emummc partion working fine i use hats pack 17.0.2 to 17.0.1 i was 18.0.0 fw i do dowengrade from sysnand cfw every things working i go to ofw and cfw. I make one partion emummc working fine but when I go ofw nintendo logo then black secreen only cfw get error pkgl error... But emummc working with every things.i dont know what coz this 😢
Dude you do not understand how much of a life saver you are. Just finished getting cfw on my switch and when this happened I thought I bricked it. you actually saved my life.
can i second this, liked subscribed, then liked and subscribed from a diff account, amazing man.
@@netvnetwork8577 can you please send me those files?
Mines isn’t booting into hektate after i inject payload what am I missing? I followed all steps
@@tahjmalik4402 did you press the power button and the volume up button for five seconds and do you have the file on your microSD card?
@@Vice_vr24 yes and it only stays black in rcm mode n yeah i downloaded both the updated hekatate and the 6.2.1 and neither works still
Life saver!!! Was about to rebuild my nand or some other craziness to fix this. Saved me some time. Thanks for the great content as always!
Me too!
Thank you so much i watched 2 of your videos to fix my bricked switch after update 17 and it wasn't working at first and then my computer recognized my switch and i got my switch working again thank you again i thought i was out of money as this happened like last year and i gave up and forgot up until recently i heard of a fix but no tutorials whatso ever until i found you and followed the guides thanks again my Pokémon are saved.
Thank you so much for this video. I was going insane trying to figure out why my OFW did not boot, but my CFW did. The last part of your video helped. I genuinely don't know what caused the issue after the latest update, but your solution helped me. I hope you have an amazing life. ❤
Hey dont know if you can give some insight but I am stuck on that Black Screen trying to boot to Stock , Sys , AND Emu- I can still boot to Hekate but trying to boot to anything else just leaves me on a black screen
Did u find a fix?
@@PokeChillSGhave you found a fix? I’m having the same issue
@@Rudy_gil1have you found a fix? I'm having the same problem. The technician said my sd card is fake and corrupted.
So I am having the same issued but my cfw-emmuMMC is working perfectly fine. Which is holding the tinfoil and switch games. But my stock sysMMC is giving me the stuck Nintendo logo and then it turns off. Your last step isn’t making sense help
To add more, I did updated to the latest official firmware on my stock sysMMC ever since I did that it has been doing that. I did took out the memory card and used a different one is giving me the same problem. Is this a bug ?
In my situation my switch froze midgame in emummc. Cant boot past nintendo logo on stock, cant get past atmosphere logo when launching atmosphere cfw through hekate menu after inserting payload successfully. Is this a boot loop? I only have two launch options: stock sysnand and atmosphere cfw. Not the cfw stock one you have. Please help as im getting nowhere anywhere ive asked about this 😢
same situation here, did you manage to fix this??
@@csh4288 tried a few things. I ruled it had caused a corrupted NAND as couldn't boot to either sys or emu but I had longterm problems with my battery which when replacing caused my SD card connector pins to be damaged when reattaching. If I didn't have those hardware faults I would of tried to restore my sys NAND and see if things worked from there. I have a replacement switch now.
@@csh4288 Idk if you are still trying to fix this problem but I had the exact same problem and I finally managed to get the cfw to work. However, I'm still trying to find out how to fix my stock sysnand. Keep in mind that I did this without much precautions or backups because I didnt rlly have much to lose but if you do, you will need to take extra steps to back everything up) What I did was first was update my firmware files. You can easily find many videos on how to do that just by searching. At this point, this is where the crucial part begins. I then installed tegra explorer which is a payload injector. I opened up tegra rcm and plugged in my switch with rcm mode on and injected the tegre explorer file. Once I was in, I went to system wipe, which should be at the very bottom. (Keep in mind, as the name suggests, its a system wipe so it's going to wipe everything. I just went along with it because I was getting desperate to finding a solution and I didn't rlly have anything to lose so if you don't want that, look up videos on how to back everything up.) Once I was in, there were 2 options, sysnand wipe and cfw wipe or something like that, I don't remember that well. Either way, you will need to do both of those wipes. Just click on one of them and follow the instructions and when it's done, go back and perform the other wipe. After that, boot back into hekate and launch you cfw and it should work. As I said before, I still haven't found a solution for fixing the stock sysnand. I hope this helps with your cfw though
Oh my God, thank you so much. I thought I broke my switch, but after watching your tutorial it fixed everything!😮
can someone please send the files he used in this video?
I removed CFW, used OFW... put it aside for a months... turned it on, forgot about it and during an update from Minecraft it bricked...i only get the Nintendo logo and fades away... Nothing else works... Any ideas?
I check the SIM card and it was chipped in half. Idk how that happened. But I took it out and it powered on. I feel stupid. Genuinely
Mine is the the fusee payload isn't working for me. It freezes on the switch logo. It boots up fine normally & on hekate
can someone please send the files he used in this video?
@RAFAEL11221000
You might want to delete the comment and repost. You put it down as a reply to my comment rather than a new comment. Im afraid I never figured out the answer and less people will see it as replys are hidden unless opened on youtube
Maybe you can help me, my switch will boot into emunand just fine but it won't boot into my ofw normally .
When I do try to boot into my ofw through rcm it crashes and I get a error code. How would I be able to fix this issue?
can someone please send the files he used in this video?
i don't know if you are gonna read this message but i don't know why but when i boot into the cfw i just get stuck to the nintendo switch logo
For me it doesn’t show the boot option
But how about when hekate has the bootloop? I have stock fine, but hekate on bootloop
Did you solve it?
Following this, I might have the same problem.
Bro mines is stick on stock but not going back to hekate. Why?
I'm fairly new to this, so this is like the blind leading the blind. 😆
Turn your switch off and then back on. While it's booting, look through the vent holes on the back of the switch. You should see the LED blinking blue, then yellow, and then it will go out and boot to hekate. If it continues to flash yellow or green, the modchip isn't glitching the processor, and you should probably check your solder points. I hope this helps.
Our switch no longer starts after an empty battery, it has atmosphere 18.1.0 on it (I think) can anyone help? How can we get it to start
Thank you, it works 🤩
Mine will not boot to anything right now. I had to get my sd connector repaired and its been down hill ever since. I can get to hekate though, so maybe thats a start.
Can someone help me I’m trying to load into stock or custom and none work it says error and red letter on the top right
can you please send me those files he used in this video?
Does RCM loader needed ? I just bought physical copy of Persona 5 Royal for my jailbreak switch. I put it in then it doesn't appear on my home menu. It asked me to update the stuff. So, I update it. Now, it open on the logo then stopped working. Based on your video, we have a similar issues but different software (I think). So I wonder that I have to buy RCM loader too to do similar like you
Also, if there's a way for me to downgrade the software back to my before broke one, please show to me. I really need it
Just modded mine mod screen work perfect but when I try n load the og version it crashes when booting into it
Help with error code 2002-3450 (0xa1ba802)
Hello! I just had my new switch v2 jailbroken using hwfly by a technician at a local store, but it's giving me an error code 2002-3450 (0xa1ba802) when launching games installed through DBI. Also when installing games from DBI, my sd card still shows 115GB/119GB (the technician just installed totk and rdr but still, it doesnt relfect on my sd card )when it does reflect on my sd card and try go launch that game, it will give the error code 2002-3450 (0xa1ba802). The technician said my sd card is corrupted and fake, but i tried 2 sd cards but still the same.
Then the technician formatted the sd card to test it again and it boots up to hekate menu but when booting to sysmmc, it will just turn itself off. Please help. I don't know what to do anymore.
Any reply will be appreciated. Thank you.
I have V2 console finish mod i can use emummc partion working fine i use hats pack 17.0.2 to 17.0.1 i was 18.0.0 fw i do dowengrade from sysnand cfw every things working i go to ofw and cfw. I make one partion emummc working fine but when I go ofw nintendo logo then black secreen only cfw get error pkgl error... But emummc working with every things.i dont know what coz this 😢
same here
Hekate not booting could you help?
Also possible with a switch with modchip
Hi how do i go back to the hacked version from here
can someone please send the files he used in this video?
Still not working
Does it work on Nintendo Switch Lite?
Another thing i found out, its on, just the brightness is all the way down
bru i did that and my tegra is not responding tf how to i fix my switch
like i just want to boot to hakate but my issue is that i just get a black screen when booting to hakate
Have you found a solution? I might have the same problem? Because when i try to boot sysmmc it will just show the hekate logo then turn off.
@@nuts-vc9bv no fam the thing just keeps booting to the normal logo and its the same black screen maybe i have to fix the jig inside the switch
Having the same issue. Not sure if my switch was updated but it’ll turn on for a second or two then go black screen
@@yu_senpai5770having the same. Issue any fix?
What the name of software used in laptol/pc?
TegraRCM
I cant access Sysnand as i get an error but ofcourse like many tutorial video creators you dont care enought to reply. Ga zo door ouwe.
How to do it in lite