How To Make Hand Gesture Control Robotic Car Using Arduino Board, HC-05 Bluetooth and L298N At Home
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- How To Make Hand Gesture Control Robotic Car Using Arduino Nano/ Lilypad And HC-05 Bluetooth Module And L298N Motor Driver Module At Home: In this project we will learn how to make a Hand Gesture Control Robotic Car with the help of Arduino board and Hc-05 Bluetooth Module.
----------------------------------------------------------------------------------------------------
Required Hardware's:
````````````````````````````````
Breadboard : amzn.to/2wjFPEm
Car Chassis : amzn.to/2P78x22
Arduino Nano : amzn.to/2ogcOF6
Arduino Lilypad : amzn.to/2Rv7qLS
7x2 cm Wheels (2 Pcs) : amzn.to/2BTshVn
L298N Motor Driver Module : amzn.to/2NoCcDB
MPU-6050 Gyroscope Sensor : amzn.to/2Kz7Lwu
HC-05 Bluetooth Modules (2 Pcs) : amzn.to/2WY0Let
12v 300 RPM DC Geared Motors (2 Pcs) : amzn.to/2MVXriT
----------------------------------------------------------------------------------------------------
Circuit Diagrams:
``````````````````````````
Receiver : drive.google.c...
Transmitter : drive.google.c...
Source Codes:
``````````````````````````
Receiver : drive.google.c...
Transmitter : drive.google.c...
----------------------------------------------------------------------------------------------------
Follow me on social media:
```````````````````````````````````````````
Instagram: / geektechnophiles
Facebook: / geektechnophiles
----------------------------------------------------------------------------------------------------
Background music:
`````````````````````````````
Song: Fredji - Happy Life (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: • Fredji - Happy Life (V...
GeekTechnophiles
It worked perfectly!! I also had short time responses whenever I had doubts! Thank you Mr. Genius
Thanks bro 🤗
@TAMIL CHAN Pair both the bluetooth module!
@TAMIL CHAN bluetooth paired not working
Is the code correct
@@geektechnophiles2494 your phone number please
Sir how to do programming I had made it but can't do programming
Hi, great video but please tell me how to pair those bluetooth modules
Is it possible to use 4 motors and 4 wheels instead of two?
Sir DId you pair the bluetooth modules before starting to make the project??
Yes pair ur Bluetooth module
Hey bro can I used Bluetooth module HC -06 and HC- 05 instead of two HC- 05
I just wanna know if is there any changes in coding, if i do so
By the way, I admire you work ,Thank youu!
By watching your video , i also want to make this robotic car , I know that i will not proceed but these + vibes came just because of your amazing work , thanks, keep posting more videos
Thanks buddy and sure I will upload more videos soon.
Hey, can we use Arduino nano or Uno instead of lilypad for the transmitter part
Anthony Noelson you can....if you can fix arduino uno on your hand gloves....which would seem pretty awkward
@@kukilp213 ok thanks. What about using adxl335 or any other accelerometer instead of mpu6050 . Would it still work with the code and everything else?
@@anthonynoelson827 I haven't gone throughout the codes, but it will change obviously. In MPU6050 for data SCL and SDA pins are used. In Adxl335 we use x y and z. Just google it for adxl335.
@@kukilp213 the adxl335 doesn't use the SDA and SCL pins so it wouldn't work right? Or is the x y z the replacement for those pins? What about adxl 345? It seems to have some of the pins needed. Would that work? Should I just look for a 3-axis gyroscope, 3-axis accelerometer? Instead of just 3 axis accelerometer. Idk if that made sense
@@anthonynoelson827 you can work with whatever you have. If you have Adxl345 SCL, SDA , VCC and GND pins are enough. I would suggest searching for codes online. It's available everywhere.
I am having problem in downloading the library...I really want o make this project pls help
I will subscribe, like, turn on notifications but after you help
Sir my entire connection is ready .
Please !!! send the required programs to operate this project once again sir . please. Because after uploading the programs to arduino error is showing..
Once again please send all the required programs . day after tomorrow we have project demonstration... Especially lillypad code
receiver code is showing error that 'backward was not declared in this scope'.......please help.....
Great video sir! But in the video, at 7:55, I didn't understand the statement you mentioned. I mean which jumper wires to remove and when? Please help
Bro plzz tell me truth will it work, i am making this project in my science fair and i have so strict budget, i dont want to waste my money, plz reply bro 🙏🙏
Yes bro it will work for sure if you make it in proper way or if you face any problem you can send me a message on my social pages, I will help you out. All the very best 🤓
Hey you made the car with arduino nano but in the test clip u used arduino uno board to run the car why plzz reply me pllzzzzzz
Big fan sir. You are genius 😘
Love you bhai 😘
bluetooth module not pairing, just blinking please help
bro I am not able to upload the code in arduino lilypad as there are alot of errors in the code when i am uploading it into my board
Subscribed and bell notification pressed. Keep the good work up. Expecting more from you very soon.
Thanks sir it means a lot for me 🤓🤓😊😊
The code file is not opening what to do plzz rply plz reply
Great work brother 👍 I'm going to make this project by following your tutorial.
Just one thing I want to ask is that I've Arduino Uno and you've used Arduino Nano. What change I need to do to replace Nano to UNO ???
No you don't need to change anything just upload the code to Uno board and make proper connections as in the circuit diagram.
@@geektechnophiles2494 What code will be used to upload in Lilypad?
Bro in making you should Arduino nano but when you run the project I can see you have used Arduino Uno?
I am really confused as I have bought all components
Please comment and let me know what have you used nano or uno
Bro ur project is nyc but I made all the connections as per u done but DIY Retails
4.2 out of 5 stars 127Reviews
DIY Retails Hc05 Bluetooth Transceiver Module is not lighting the bulb on Bluetooth is not glowing plzzz help me bro
great tutorial but i have one issue that when i compile the receiver code i get an error:
hand_gesture_control_car_receiver:31:16: error: 'backward' was not declared in this scope
'backward' was not declared in this scope
Please change backward as reverse ()
thank you
i also don't understand what mode th bluetooth module needs to be ??
Transmitter code gives many note and warning while compilation.....how to solve this..please reply...
I have include all necessary librarys still give warning
What is the code?
you deserve 1million subscribers really , i am going to make this project recently for my final project 🙏🏻🙏🏻🙏🏻🙏🏻
U know the program has a lots of error and not even compiling. Pls help
And I have noticed that u are not replying to those who have some problem but to those who are appreciating you. Kindly reply us too who have problems.
Hiii , can you please explain what kind of error are you getting?
can you please send me synopsis
How to connect betwen hc05?
bhai pls pls pls it is very good and nice but what about programming ? ahh ?
i am begging you you pls sir
sir pls reply or give your instagram acc
Greate work GeekTechnophiles keep it up..
can you video in how you upload the code in the lilypad? pleasee
Same problem
Harish Lohar I learned how to upload the code. just do the basic upload and you may see some red lines it's not an error , and that's it .
Have you completed that project?
Bhai how to do coding
Do you use which it is
good video I like it
How to do programming
এই ভাবে বাজনা না দিয়ে কি পারস লাগে বলে দিলে ভালো হবে
How to program in lilypad
Hey bro .. please tell me one thing ... i had made this project .. but the problem is that .. the bluetooth doesnot recieve the data.. but bluetooth pairs .. and the car works on direct wires .. please help me out
I have done all the connection . Transmitter is transmitting but the receiver is not take the values
Sir will you plz give me a detail abt the transmitter code it is not working for me, please reply me as soon as possible sir.
How you have code the lilypad pls explain i want your no. Plsss
Bro how you program ardiuno lilypad, plz reply
Please follow this link
www.instructables.com/id/How-to-upload-codes-to-Lilypad-Arduino-Without-FTD/
Sir when i am uploding the codes it is saying backward error because of this i am not able to uplode codes plese help me sir🙏🙏
type reverse in place of backward(where the error is showing)
For transmitter error is coming in coding it showing that mpu was not declare in scope
fack ha code nahi ha
You didnt say the part where you connect those 2 bluetooth devices i am facing problem there please help me at that part
@GeekTechnophiles hello bro one question the castor wheel in the front of chassis it comes attached with it or u have attached it plzz reply it is very urgent plzzzzzz
Could you please send the reciever circuit program again because the code provided below is not opening, and transmitter circuit code is opening.
can u tell me that do we have to just put the receiver and transmitter code? what about the other codes in your zip file please let me know
Do you install any driver to program Arduino lilyped
Sir I am making it will it work please tell because after 5 days there is a science fair at my school
9:22 it is clearly visible that you have used arduino uno in your project. But you have showed that you are using arduino nano to make this project
I have answered this question many times. Please go through all comments.
do this really work
I wonder about it too...
Sir what power source did you use in the glove ????? Pls help sir fasttttt
I don't know how the hell Arduino Nano changed to UNO you are a copy cat
Don't mislead the others 😡😡😡😒😒
Well you only noticed about Arduino nano check it again Deepti sharma i have also replaced motor driver module now i am using L298n module it is because the running video of project was old one. This video is fully instructed with new components. 😊
5:15 you sorted Vcc and GND with what ? basic wire or tin ? basic wire is not enough ?
لو سمحت نفس كود الاوردوينو نانو هوه هوه نفس الكود اللي عل الاوردوينو ليلي باد
In transmitter which one code we have to upload
Sir big fan i have made your project but your codes are not uploding please sir help me i am reguesting can you send me the link of yoir both reciver and transmiter codes plese sir i am requesting 🙏
I have already shared both source codes in video description. Can you please explain what errors you are getting while uploading the code.
How to program lilypad pllz tell.... Anyone
Plz provide source code its not opening
Can you please tell me how to to connect the both hc05
u showed arduino nano in circuit making.....and showed arduino uno in demonstration....
is circuit diagram same for both boards
Yup circuit diagram is same for both boards. Actually demonstration video was old one, at the time of making tutorial i do not have enough time to record proper demonstration video for this project. So i just use my old recorded video.
Sir can i get the source codes please
I am the no. 761 subscriber keep on bro nice work
Receiver program is one error bro...backward is not declared in this scope ..how to solve
I will update my source code by the end of the day.
I can’t upload the transmitter code
Can anyone please help ....While uploading the code to lilypad i am facing an error of
avrdude: ser_open() : can't open device "\\.\ COM4" : A device which does not exist was specified.
Needed faast reply please.....
Select correct COM port before uploading code to Arduino
@@geektechnophiles2494 it's showing only one COM yaarr... there are no other multiple COM ports .
Even after selecting it ,the error repeats
Bro how can i charge the batteries if needed?there is no scope to recharge as u showed in the video??
Is the transmitter code correct
Superb work bro.. keep it up 👍👍
Thanks bro stay tuned 🤓
What is the battery used for receiver
super bro...u are talented person
good luck bro
circuit is completed but it is not working
should we pair bluetooth modules ?
Yes you need to setup both bluetooth modules with AT commands
awsome project, can i use hm 10 ?
Arduino change kyu Kara fake video
I have answered it many times please read below comments
Transmeter Mei compitting board Bata Raha hai
Make new video we don't want to wait for one
What is the code for the car?
Aurduino nano kab jod diya tune motor driver ke jagah
Bro please tell me how to do programming or how to put code please
It is not working
great video bro!
can you tell me the programming for lilypad for this?
I have a different type of accelerometer which have x y z output
You have AXDL accelerometer module. I have use MPU6050 module. You have to purchase MPU6050 module for this application
türk varmı ?
Sir plese help me i am requesting because on 30 my science fair is organising plese help me as a fan
Text me on my social media pages.
You used arduino uno with which ic?
Ur really ginious broo😍
Thanks 🤓
Plse tell me about the power supply
Sir I want to make it it will work plz tell
pls reply sir
How to download coding
Sir theres an error in source code plz help us
Receiver code da car kku dum pannum pothu backward is nat declared error varuthu bro.....how to solve
Not able to understand you bro.
Pls help
How I programme arduino nano
Can i use 6v motor ?
I need reciver circuit diagram
great project, and vivid description