How to Make a Gesture Control Robot at Home
ฝัง
- เผยแพร่เมื่อ 26 มิ.ย. 2024
- Learn- How to make an Arduino Based Gesture control robot. The MPU6050 gyro sensor used to detect hand movement and HC-05 Bluetooth modules are used to communicate between glove and robot.
For More details about AT Commands and Bluetooth module configuration visit here: / shubhamsuresh
Direct order PCB used in this project from PCBway: www.pcbway.com/project/sharep...
Components Used:
1- Cardboard, Acrylic sheet
2- Arduino UNO X1 - www.amazon.in/gp/product/B015...
3- Arduino nano X1 : www.amazon.in/gp/product/B07C...
4- BO Motor X2 - www.amazon.in/gp/product/B074...
5- Wheels X2- www.amazon.in/gp/product/B07D...
6- IC L293D x1 - www.amazon.in/gp/product/B07H...
7- 2s 7.4Volt lipo battery X 2- www.amazon.in/gp/product/B07P...
8- PCB- www.amazon.in/gp/product/B01A...
9- Connectors- www.amazon.in/gp/product/B01N...
10- Bluetooth Module X 2: www.amazon.in/gp/product/B071...
11- MPU-6050 X 1: www.amazon.in/gp/product/B07H...
12- Gym Gloves X1 : www.amazon.in/gp/product/B07N...
13- Caster Wheel:
www.amazon.in/gp/product/B00S...
Tools used:
1) Soldering Iron: www.amazon.in/gp/product/B07P...
2) Soldering Stand: www.amazon.in/gp/product/B015...
3) Soldering Wire: www.amazon.in/gp/product/B07M...
4) Soldering flux: www.amazon.in/gp/product/B07P...
6) Glue gun: www.amazon.in/gp/product/B074...
7) Multimeter: www.amazon.in/gp/product/B01B...
For more projects follow me on
Facebook:- / stronixtechnologies
Instructables:- www.instructables.com/member/...
Hackster.io:- www.hackster.io/shubhamsuresh
Download Circuit & Code from the link:- www.mediafire.com/file/l8mru5e...
Thanks For Watching the Video.!
if you like it gives a thumbs-up, share, comment your doubt,
and don't forget to SUBSCRIBE the channel for more videos
#arduino
#bluetooth
#gesture
#robot
#ArduinoProject
#SmartRobot
#diy
#Howto - วิทยาศาสตร์และเทคโนโลยี
Ur work is unexplainable.....thanks sir...I'm waiting for ur next video.
👍👍
Wooow! Have observing your all projects, Shubhamji you are unique and has BEST ability, can do anything! I have seen you can turn any project if someone bring in mind. Seeing you are bringing virtual things to real world, you are unbeatable in logic. Keep it up.
Thank You sir ji..... Stay tuned, I will be here every 2nd Sunday.
Awesome bhaiya
Superb........ excellent work...... waiting for ur ......new concept 👍👍👍👏👏👏👏
Thanks....!
The videos you make,it makes so easy to build a project.
Project classic hai bhai👍🏻
Awesome it does not have any trouble in delay for sending info via Bluetooth module that shows program is perfect you are the best
Thanks man....!
Sir how to solder the remote unit ? Please anyone give me suggestion
Till now we used to understand that in Hollywood movie everyone shows fake but today you show proof 👍.
Agreed Master, You Are really Genius. 🙏🙏🙏
Thanks, Pawan Bhau...!
crazy! By the way, is there a shield that can replace the one you wrote in the video?
Wow man..
It's amazing....thank you very much sir for uploading such type of videos...
Awesome project!! Can be used Hm 11 ?
Cool
I luved it
Nice
Question I have xbee wireless is there way to use this method with the xbee wireless instead of the Bluetooth
Waooo. Interesting
Sir is resistor is needed in remote unit or it can be connected directly
Should we need to program mpu6050 or its just plug in use type
@Shubham Suresh , the link of Arduino UNO X1 is unavailable can you please rechange it.
Can i also use 12 v dc motor to make it fast rather than bo motor
The way of video presentation is to good & the technology that can be create on your mind is hats of you man 🎥💡
😊😊👍👍👍
Shall we use l293d motor driver shield insted
Interesting bro... Just wow❣️ all the best 👍
Thanks Bro....
Using resister in remote is compulsory or we can skip that or cab I use 22k instead.
can any other shield can be used instead of it? could u please help me....
Nice video
I like video
Bro ! What kind of changes I need to do if I use L293D or L298 motor driver! Please reply....
Good job
Thanks, Deep..!
Can i use breadboard instead of pcb and another motor driver
You have a s-tronix robot build (shiled) in a material list. What is a this card? How to find it? Please help me. Thanks
Hey, I design that shield. and S-TROniX is my brand name. I can send it to you. or you can Order PCB for that shield from the PCBWay I provide all details there. order link for PCBWay is given in video description.
Bro the site you provided for direct order pcb in the description is not working , can you provide right one .Project was good
yup .. I remove that content from that site. you can DM me to buy the robot shield. 8999497870
Sir my remote unit is not working i soldered based on the circuit diagram but the mpu6050 and buletooth module is not working please reply me.
what are the components you used in remote unit ??
Hey, shubham. I'm in canada, and certainly I have no clue about the robot shield. Can you please help me what is its name or I can buy it from Amazon. Help!!!
De rov kit project jama karayacha aahe
It is really fantastic but you have not given the link for robot shield
it is not available in the market. if you want you can buy it from me. for more details mail me shubhamsuresh.94@gmail.com
Can you send the circuit if I have L298 motor driver because I don't have another motor shield
Can I Replace RF instead Of Bluetooth Module And what Changes i have to do plzz reply
Pls give the link for basic robot shield as we have to make the project.
this shield is not available in market. you can buy it from me for more details mail me on stronixtechnologies@gmail.com
how many distance it can work
Can we do programming by mobile, please reply
Camera konta use kelay
Hello Shubham, what's the name of the robot shield? I'm in Canada and I can't find it. any alternatives or the name of it?
Hi Dima, it will not find you anywhere. the only way is, go on link which I have given for PCB download for this shield. www.pcbway.com/project/shareproject/How_to_Make_a_Gesture_Control_Robot_at_Home.html
This site is not working. Is their any other source??
So After uploading the bt program we connect It to rx/tx (0/1) because pin 10/11 are occupied by the DC motor right?
yup..
@@ShubhamSuresh Thanks :)
Can we use 4motors if so will their be any changes in the program
yes you can use 4 motors with the same program.
Sir how to connect it with four wheel
What if we do with 4 wheels
Can i have the full coding for handgesture control?
Sir please send me the link of shield you use on the Arduino in these video
this shield is not available in market. you can buy it from me for more details mail me on shubhamsuresh.94@gmail.com
Can i inter code with mobile
Which is the code to program mpu6050
can i use any other lithium battery
3.28 PAI VO CHOTA SAI SWITCH KO KYA KHATE HAI
What kind of link u have provide
UNO Based ESP8266 can i use this in place of adrino uno x1
yes u can
Can i use arduino uno instead of nano for transmitter
yes
How to do programming
I'm not able to download ur code or schematic
Can we replace bluetooth with RF TX and RX???
yes you can, but you need to change code also
Remote code not uploaded?
IS IT COMPULSORY TO DO SOLITERING FOR GLOVE MATERIAL .
CANT WE JUST FIX ALL AND STICK IT
yes you can
so PCB IS REQUIRED OR NIR AND FROM WHERE WILL I GET THE CODE
How to connect the 1st bluetooth from 2nd bluetooth
refer my instructables for more details.
Can we run whole wheels from this code plz reply bro i made a car with four wheels but i have no code for Arduino please reply i spending some money plz help
yes you can.
its really god but does it work really?
Ur creativity mind-blowing , improve ur presentation
Where do I get that robot shield please give me link please reply me fast I need to do this in a week for project
Hello Ravi I can ship it for you. where are you from.
@@ShubhamSuresh@ Bangalore
@@ravibksheshagiri634 okk I can Send it to you for more you can mail me At shubhamsuresh94@gmail.com
@@ShubhamSuresh can I make this robot without robot shield
@@ravibksheshagiri634yes, of course just follow the given circuit diagram.
Sir can we use 4 motors ?
yes
link module S-tronix pls ....
link for motor sheild
you can buy it from me: mail on stronixtechnologies@gmail.com
What will total expense in this? Plz tell me.................
Could you send the link of robot shield.
check video description. I already put a link for that.
@@ShubhamSuresh You put the IC note the shield 😭
Can I use 2 18650 batteries
yes you can
Sir my Bluetooth module was blinking non stop .AT not commanding ok pls ...... Help sir
check this
www.instructables.com/id/Easiest-Way-to-Make-a-Gesture-Control-Robot/
Can you give code and circuit
Is it possible to control using wifi module
yes, it is.
What is the use of the button in remote
To activate and Deactivate the remote.
Which type of switch is used
@@Rocky-ir4pm it's a tactile switch
I want motor driver for this project please
it is not available in the market. if you want you can buy it from me. for more details mail me
shubhamshinganapure@yahoo.com
The link of code is not downloadable
send pcb connections
Hello shubham love ur work i have made this project by seeing ur video can i have ur num to understand it properly
Thanks Usman. you can check my Instructables on the subject for more details.
In the item list you put a 9V battery but Arduino uno works between 4.5/5.5V, It shouldn't be working with a 9V battery, what did you use in the video???
arduino uno have a dc power jack which can accept 6-12Volt
@@ShubhamSuresh In fact i did put the vcc1/2 and the en1/2 from the l293d into the Arduino Vin, when I turn it on with the usb cable from my PC It works, but when I use the 9V battery and i put It in the jack the motors don't work...
@@cacciaaa9579 check your battery voltage. or use a more reliable battery like lipo battery. sometimes that 9volt battery can't satisfy the current requirement of motor.
@@ShubhamSuresh I think i found the problem... From the datasheet of the l293d i read that the vcc1 works with 5 v max and the vcc2 works with 36 V max... Following your circuit in the website you put the vcc1/2 together It Is wrong because vcc1 CAN'T work with 9V from the battery(Vin pin) so the motors won't work with that battery... I think that Is the problem, today i'll try to put the vcc1 on the 5V/3.3V pin and the vcc2 in the Vin, and It should work...
@@cacciaaa9579 the circuit I put in the description is tested. there is no problem in the circuit. it may be a problem of your battery. or you may not share the ground of motor driver with Arduino.
How to change Bluetooth module baud rate
check out it on my patreon page, I put all details there. www.patreon.com/ShubhamSuresh
www.hackster.io/shubhamsuresh/how-to-make-a-gesture-control-robot-at-home-a3f4a4
Sir can I buy this model
yes, sure you can. for more details mail me at shubhamshinganapure@yahoo.com
What does the button do?
it activate or deactivate the remote.
From where do we get that data
Plz tell me
which data
Interesting but accuracy needed
working...... thanks for your valuable suggestion.
how much did it cost to make this?
not more than 2500inr
Pls help can't understand anything
Ap ne components k nam nh btaey.
Tu arduino vr kit thevli tyachi link nahi yethe
2:06 time
@@vkpresent6673 Ho. ti kit market mdhe available nahi ahe sadhya... mhnaje ajun me tila officially launch nahi kelel. tu directly mazyakadun ti buy karu shaktos. kit buy karaychi aslyas yavr mail kr shubhamsuresh.94@gmail.com
@@ShubhamSuresh
Kiti la aahe
@@vkpresent6673 inbox me re bhai... tuyakdun kai jast paise ny ghenar....
@@ShubhamSuresh
tari kitila
Bluetooth madhe program problem hotoy 9% upload hotoy
4.44
🙏🙏🙏🙏🙏
Mail kela aahe
Maza ghe email
Vaibhavkedare05@gmail.com
Bro ship this to my address I am ready to pay for it
sure I can do it. For more details contact me on stronixtechnologies@gmail.com
What about uploading in nano, as you uploaded in uno but not in nano
Whyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
Kuch be nai smjai ..plz send me ur project to me ...I give u all payment
mail at stronixtechnologies@gmail.com
@@ShubhamSuresh .can u send me your personal number ....cause I have project on this program ...I collect all the part but we can't make it ....so I need readymade devic ...cn u please help me out ...I have to show my progrm on 24 July
That sucks
Nice video
I like video
Nice video
I like video