If you're mounting multiple units, what is the recommended distance between the Symo units?? I didn't notice anything in my manual. Is 10 to 12cms between units enough?? I have 5 to install & space in my location is at a premium.
Hi when I was checking the plan of three phase solar project I mentioned in J-Box two DC wires convert to six wires. can you explain how it happens? is it just to connect each wire to three or it has a different story and I search a lot but I couldn't find any explanation. thanks
Hi! Please contact the manufacturer of the J-Box. The J-Box would be a third party part, not directly Fronius product. Best regards, your Fronius Social Media Team
Hi! The SnapINverter line are all transformer-less, meaning there is no direct tie to ground on the DC side. There is yo the option of running an “equipment ground” to the grounding terminal located inside of the Inverter’s DC terminal block. Best regards, your Fronius Social Media Team
Hi Zachary, What might look like the ground is actually the flat roof of a commercial building. The inverter is installed on a mounting rack as you can see in the video so that it has an approx. 15° inclination. Generally, inverters should be installed in an area that is protected from direct sunlight and should not be installed directly on the ground. Please note: In the US flat roof installations are quite common. Please check the national installation code in your country.
Hi! This racking is assembled on site with a standard PV racking system. Fronius does not offer racking systems and we recommend to inquire your distributor for standard racking systems. Best regards, your Fronius Social Media Team
If you're mounting multiple units, what is the recommended distance between the Symo units?? I didn't notice anything in my manual. Is 10 to 12cms between units enough?? I have 5 to install & space in my location is at a premium.
Excelente...!!!
Hi
when I was checking the plan of three phase solar project I mentioned in J-Box two DC wires convert to six wires. can you explain how it happens? is it just to connect each wire to three or it has a different story and I search a lot but I couldn't find any explanation.
thanks
Hi! Please contact the manufacturer of the J-Box. The J-Box would be a third party part, not directly Fronius product. Best regards, your Fronius Social Media Team
Is it possible to be use on off grid without batteries?
Hi! All Fronius inverters in the US are tied to the grid. Best regards, your Fronius Social Media Team
Why isn't there a grounding wire on the DC side?
Hi! The SnapINverter line are all transformer-less, meaning there is no direct tie to ground on the DC side. There is yo the option of running an “equipment ground” to the grounding terminal located inside of the Inverter’s DC terminal block. Best regards, your Fronius Social Media Team
so the inverter is installed just laying on the ground??
Hi Zachary,
What might look like the ground is actually the flat roof of a commercial building.
The inverter is installed on a mounting rack as you can see in the video so that it has an approx. 15° inclination.
Generally, inverters should be installed in an area that is protected from direct sunlight and should not be installed directly on the ground.
Please note: In the US flat roof installations are quite common. Please check the national installation code in your country.
@@FroniusSolar Where can someone buy this inverter mounting rack as in the video? Do you provide it?
Hi! This racking is assembled on site with a standard PV racking system. Fronius does not offer racking systems and we recommend to inquire your distributor for standard racking systems. Best regards, your Fronius Social Media Team
@@FroniusSolar Thanks. !
what is life of this product?
Hi Syed, in the US all inverters come with a 10 years standard warranty. Best regards.