@@11101B_BarcbotsGettingThere thank you, im sure it doesn’t matter but I don’t want to order the wrong thing, but does it matter for the inner diameter to be 0.166 or 1.71?
they're annodized c channels, you can buy them like that I'm pretty sure, we just found some in our random parts bins. We're using acetal for the plastic, would recommend.
whats the motor catridge for the puncher? ours is 12 slip to 36 which is the same gear ratio and we use a red cartidge. Its pretty slow compared to other robots with 30-35 second matchlaooding. Seeing as you have a 200 driver skills, its urs also just as slow or is anything different?
100RPM red cartridge. reduce the amount of rubber bands to get max speed. At 100rpm you should be able to matchload 44 triballs in 27 secs. If you want to be faster you'll need to use different gear ratio and/or double slip gear.
@@cucubob9535u should try out 200 rpm cartridge, 12 to 36 ratio, doubled slipped on the 36 to a 60. 133 triballs per minute so it’s pretty good for skills
Hello good day I would like to know how do you set up your double-acting piston that only has an air outlet on one side, do you still use the double-acting selenoid or do you use a single-action selenoid? Without further ado, I bid you farewell and send you my cordial greetings
There are different sizes of spacers and standoffs you can get from mcmaster-carr. Search for: Off-White Nylon Unthreaded Spacer 1/4" OD for Number 8 Screw Size Nylon 6/6 Plastic Hex Standoff 1/4" Hex 8-32 Female Thread
we use double chains for this reason, as we need the motor closer back on the intake. we're looking into using gears on our new robot but both are an option
classic 4:3 600 rpm drivetrain
winning worlds with this one 🔥🔥
Honey wake up new Barcbots video dropped
Barcbots got there 🗣️🗣️🗣️🗣️🗣️
have you ever had issues of running out of air from wing use and not being able to hang?
We have enough air for 3 climb attempts by the end of the match.
plans for the rebuild? what would u want to improve from this robot
yes, we are rebuilding for states/worlds. everything.
@@11101B_BarcbotsGettingThere high hang or no?
Where do you get the thin spacers from?
McMaster-Carr
Off-White Nylon Unthreaded Spacer
1/4" OD, for Number 8 Screw Size
@@11101B_BarcbotsGettingThere thank you, im sure it doesn’t matter but I don’t want to order the wrong thing, but does it matter for the inner diameter to be 0.166 or 1.71?
Where did you get the McMaster car spacer
From McMaster car website
What is the black plastic screw part# that you guys are using? IProbably also from McMaster ?
found it in McMaster
Do you ever have problems with your shaft collar getting loose? Looking at the video, it looks really hard to adjust it
as long as you tighten them they will stay in place. do regular inspections and maintenance. it's fairly easy to tighten shaft collars on motor axles.
Have you ever had issues with the radio being in the intake cuz it's always moving so there may be a risk of dc?
too many DCs. we don't recommend to do this.
How do you make your C channeling black, and where and what type of plastic or polycarbonate do you use?
they're annodized c channels, you can buy them like that I'm pretty sure, we just found some in our random parts bins. We're using acetal for the plastic, would recommend.
@@timurd792 ok thank you :)
Have you been to your event region championship yet?
Not yet, region 2 states in early march.
What tier does your climb get?
C-tier horizontal bar
whats the motor catridge for the puncher? ours is 12 slip to 36 which is the same gear ratio and we use a red cartidge. Its pretty slow compared to other robots with 30-35 second matchlaooding. Seeing as you have a 200 driver skills, its urs also just as slow or is anything different?
100RPM red cartridge. reduce the amount of rubber bands to get max speed. At 100rpm you should be able to matchload 44 triballs in 27 secs. If you want to be faster you'll need to use different gear ratio and/or double slip gear.
@@11101B_BarcbotsGettingThereK ill try that, thanks. Congrats on 3 sig finalists btw
@@cucubob9535u should try out 200 rpm cartridge, 12 to 36 ratio, doubled slipped on the 36 to a 60. 133 triballs per minute so it’s pretty good for skills
Hello good day
I would like to know how do you set up your double-acting piston that only has an air outlet on one side, do you still use the double-acting selenoid or do you use a single-action selenoid?
Without further ado, I bid you farewell and send you my cordial greetings
single acting solenoid
Hello, so what motor cartridges do you have on your drivetrain, 100, 200, or 600, rpm? Thanks
600rpm
Thanks so much! gl at worlds
do you use any single acting cylinder?
we don't use any legacy smc pistons, but we use the double acting cylinders with single acting solenoids for wings
What is the part # for drivetrain thin spacer? And what is the part # for plastic stand-off ?
There are different sizes of spacers and standoffs you can get from mcmaster-carr.
Search for:
Off-White Nylon Unthreaded Spacer 1/4" OD for Number 8 Screw Size
Nylon 6/6 Plastic Hex Standoff 1/4" Hex 8-32 Female Thread
Have you found a place to get the 75mm pistons other than the kit from Vex. the kit only comes with one.
yea I also have that question
We use official V5 kits from vex store.
How does your floating intake limiter work?
We just got a stand-off brace that doubles as a hardstop. It sits on the c channel that the intake is attached to
How is the bottom of the hang pistons connected to that 3 wide on the drive?
screw joint on axle locks. there are many ways to do this.
would the climb work during utah grand finals 2?
it would but the right wing said NO
what kind of polly do you use and how do you cut it
Polycarbonate from robosource and acetal/delryn from mcmaster-carr.
Can you drop the dxf file for the climb?
dont got one
Are those traction wheels used for your drivetrain legal?
they're bought off vex so yes
we got them from VEX, not sure how legal they are.
BAR - C - BOTS
What is the axle/bar at the bottom of the front of the drivebase?
helps to brace the drivebase
@@11101B_BarcbotsGettingThere Right, but what's the name of the part? Is it a high-strength shaft?
yes, 24" High Strength Shaft
How do you guys only run one tank but still can get hang?
200ml tank. we can climb to B/C tier at 50psi.
I think it’s also probably because of their leverage, so pistons have as much power as possible
Are the brass inserts better than the green inserts?
yes
What size flex wheels on the intake?
2"
@@11101B_BarcbotsGettingThere is 2 inches better than 3 for intake?
3 is too big imo
How do you use the distance sensor on the intake to awp
Drive slowly until distance sensor reads value less than some threshold than stop, we found threshold just experimentally
how strong are your horizontal wings? Do the new pistons work better?
We’re still using 50 mm pistons on horizontal wings, they work fine for skills and autons
When you mention that the slapped needs to be the same weight as the tribal did you mean like the part that hits the tribal or the whole c channel
hitting element
is the beast winning worlds?
This robot is retired, 2.5 months old.
we r trying o7
This bot is so cool!!!
WERE WINNING WORLDS WITH THIS ONE‼️‼️
W robot
I would suggest using gears instead of chains because they can’t necessarily snap but great Robot!
These guys won worlds last year-they know that chains are better in this case
we use double chains for this reason, as we need the motor closer back on the intake. we're looking into using gears on our new robot but both are an option
nah chain is fine here since it’s not under much stress and won’t be hit too much
you sound like rammus for league of legends
nice
MEGA BARCBOTS W
💪
Sheesh