I'm glad you went with knobs that keep the gear layout on them. It'll help new drivers and not be an issue when selling, should that happen. Too many folks go with new knobs that don't have the layout, forgetting they probably won't be the only ones driving. 👍
Does your shift knob have a bigger gap on one side than on the other at the bottom of the knob? I love the shift knobs but the manual shifter doesn’t fit correctly. It’s all black and hard to see, but I know its there. Love the videos BTW
Ben: Another great video. You mentioned the need to work on the interior of the Jeep. My I make a recommendation. We pulled the seats and carpet out of our 2016 JK and installed HushMat. We ran the Trans-America Trail this past June/July and it made a tremendous difference when running with the top on as it reduces road/undercarriage noise. Maybe you can air a video to show the install. Not too difficult, just a lot of cutting and sticking the sheets down. Once you added the BedRug, you will be very happy with the outcome.
Seems like they fit on the shift levers kind of loosely? I probably would've wrapped the upper part of the lever, in electrical tape, until the levers fit snugly, then tightened that set screw. Just my .02 cents. Love the vids, keep em coming!!
I know how you feel man I'm trying to get my one night Build the video out and I've been sick as hell I think it's that time a year. But I think I'm gonna push through and try and do the build anyway you should check it out
Well i found it! Looks like the price went down a bit since I got mine a few years ago. I highly recommend it, it’s a nice touch to the interior. amzn.to/2TNs8Hg
Hey Ben. This isn’t related to the shift knob but are you still running the drop control arm brackets ? And if so what do u think of them ? Do u find they hit on objects ?
Still running them! And they are a great way to get a better ride and control arm angles. I hit mine on rocks often, not a big deal at all. They hit in the same place that long arms wouldz
A footnote about the shift knob, I have 2013 JKUR with a manual transmission. The bend in the shaft is higher up than on the shaft in this video. You will need to check where the shift knob will sit. If the bend is higher toward the top like mine, there will be a bigger gap on the driver side at the base of the shift knob than at the bottom. The result is that the shift knob will look lopsided. I went back and forth with Adam at AJT regarding this issue and he was unwilling to do anything to do anything to help. His response was that he has never run into this issue in the year that he’s been selling these knobs. Just to clarify, the shaft of my shifter is OEM I find it very hard to believe that in the year he has sold these, mine would be the only shifter with the bend at the top 4 inches of the shaft. I call B.S. buyer beware when buying from a company that refuses to help you.....Sorry for the rant, but that’s the way I feel about poor customer service.
Got mine today and am experiencing the same issue. Glad it’s not just my imagination. Also, the transfer case knob doesn’t fit real secure with just 1 screw down point. For the money, I’m kinda bummed.
I'm looking at a '15 Sport with a 6 speed, how much shifter vibration is normal while driving down the road? The one I test drove had alot but did shift smoothly. Thanks
Ahh let me think. I bought it when I first got the Jeep, the factory rubber was ripped. I want to say I got it from a place called redline? Not too sure, but it was online and it’s a leather shift boot. Looks pretty nice I think
Like your videos bro. Strong work and keep them coming. With that being said these are not impressive. The transition from stick to knob isn’t great and there isn’t anything special here. Hope these aren’t more than 20 bucks a knob. They remind me of the knobs at autozone. But like I said earlier great videos and also great stuff on your wives channel....Plus she’s a lot easier on the eyes than you are. Seriously though keep em coming bro, and I hope u feel better.
@@JKGearandGadgets of course you do since you get paid for it! But the point of channels like this should be to make relevant videos and ones that are actually teaching people something. I understand that you get free parts in exchange for making videos but I think a simple shout out would have been enough.
Allen Wilson no worries man. He made a good point and everyone’s able to have their own opinions. I took his comment as a compliment in a way, it’s cool to see that people are watching my videos with the intent to learn something. I started the channel for that reason, and I need to get back to making more Informative videos and true “how to’s”
Forget about the other dirty staff man, look at those shifting knobs, absolutely impressive, I LOVE IT, great job man
I'm glad you went with knobs that keep the gear layout on them. It'll help new drivers and not be an issue when selling, should that happen.
Too many folks go with new knobs that don't have the layout, forgetting they probably won't be the only ones driving. 👍
Hey. U know because of you. I got a jeep. Nd im so happy. Its a 2018 jk 4 door
Awesome!!! Enjoy it!
That’s so cool.... don’t forget about the guys with auto transmissions!! Keep it up love your Chanel.
One of the first things I got for my LJ was husky and weather tech floor liners. Easy to kick the sand/dirt out then rinse off.
Looks great, I love the touch of red
Highly recommend the rock hard sport cage over the vector bar! I’m running it with 67designs phone and camera mount
I’ve thought about doing that, but for now I don’t want to do the rock hard. Eventually I plan on building a custom cage
To cool! I loved the look so went with it but I’d much rather have a full cage!!
Does your shift knob have a bigger gap on one side than on the other at the bottom of the knob? I love the shift knobs but the manual shifter doesn’t fit correctly. It’s all black and hard to see, but I know its there. Love the videos BTW
Great video, been looking for something better for mine to and just placed my order I can’t wait to get them on
Ben: Another great video. You mentioned the need to work on the interior of the Jeep. My I make a recommendation. We pulled the seats and carpet out of our 2016 JK and installed HushMat. We ran the Trans-America Trail this past June/July and it made a tremendous difference when running with the top on as it reduces road/undercarriage noise. Maybe you can air a video to show the install. Not too difficult, just a lot of cutting and sticking the sheets down. Once you added the BedRug, you will be very happy with the outcome.
Oh yeah! Feel better bro!! 🤪
Thanks man!
Yeah Brother!!👍✌️😀 I love my moab shifter rocks!!
Those are sick!!! Check out Raptor liner for your interior. Its tintable.
I might do that! Still unsure
Seems like they fit on the shift levers kind of loosely? I probably would've wrapped the upper part of the lever, in electrical tape, until the levers fit snugly, then tightened that set screw. Just my .02 cents. Love the vids, keep em coming!!
That’s not a bad idea. If I notice any slop in the future I will do that
Looks good man hands 😂😂
dude I wish it was cold here in Miami, Its sooo hottt
I’ll trade haha. Freezing my ass off here
Looks good
Looks great.
I know how you feel man I'm trying to get my one night Build the video out and I've been sick as hell I think it's that time a year. But I think I'm gonna push through and try and do the build anyway you should check it out
Awesome
I need to know what that shift boot is, because mine is disgusting and I wanna upgrade it
I will try to remember haha it’s been soooo long.
Well i found it! Looks like the price went down a bit since I got mine a few years ago. I highly recommend it, it’s a nice touch to the interior. amzn.to/2TNs8Hg
He's just sick cause Cassie is whippin his butt in the video section... lol j/k get to feelin better.
Hahahaha for real 😂🤦🏻♂️ I should have had her make this video
Hey Ben. This isn’t related to the shift knob but are you still running the drop control arm brackets ? And if so what do u think of them ? Do u find they hit on objects ?
Still running them! And they are a great way to get a better ride and control arm angles. I hit mine on rocks often, not a big deal at all. They hit in the same place that long arms wouldz
Ya I’m after a better ride and thought it would help just wasn’t sure on clearance , that’s why I haven’t pulled the trigger yet. Thanks for the info
A P I would recommend these, just as beefy as mine and a great price too. What size lift are you running? amzn.to/2NSFSwF
looks nice but that price is up there for some knobs for me :( thanks for sharing tho got a idea how to pull the knob at least
A footnote about the shift knob, I have 2013 JKUR with a manual transmission. The bend in the shaft is higher up than on the shaft in this video. You will need to check where the shift knob will sit. If the bend is higher toward the top like mine, there will be a bigger gap on the driver side at the base of the shift knob than at the bottom. The result is that the shift knob will look lopsided. I went back and forth with Adam at AJT regarding this issue and he was unwilling to do anything to do anything to help. His response was that he has never run into this issue in the year that he’s been selling these knobs. Just to clarify, the shaft of my shifter is OEM I find it very hard to believe that in the year he has sold these, mine would be the only shifter with the bend at the top 4 inches of the shaft. I call B.S. buyer beware when buying from a company that refuses to help you.....Sorry for the rant, but that’s the way I feel about poor customer service.
Got mine today and am experiencing the same issue. Glad it’s not just my imagination. Also, the transfer case knob doesn’t fit real secure with just 1 screw down point. For the money, I’m kinda bummed.
Just put mine one and experiencing the exact same issue :/
What about 09 JK. How can I extend the shift lever?
I'm looking at a '15 Sport with a 6 speed, how much shifter vibration is normal while driving down the road? The one I test drove had alot but did shift smoothly. Thanks
Will it fit a automatic transmission and do you just pull it off the same way
I would reach out to to the manufacturer, I think they make a set for the automatics
Does this work with a jeep cherokee limited?
Not automatic
Howd you do that shift boot? Cause it looks alot better than the rubber one my 2009 JK has.
Ahh let me think. I bought it when I first got the Jeep, the factory rubber was ripped. I want to say I got it from a place called redline? Not too sure, but it was online and it’s a leather shift boot. Looks pretty nice I think
There's actually thousands of custom shift knobs on the market. Just type it into google search. Custom and customizable from multiple companies.
Why did us remove the hood bumps
Are you talking about the UFO ones I did?
Like your videos bro. Strong work and keep them coming. With that being said these are not impressive. The transition from stick to knob isn’t great and there isn’t anything special here. Hope these aren’t more than 20 bucks a knob. They remind me of the knobs at autozone. But like I said earlier great videos and also great stuff on your wives channel....Plus she’s a lot easier on the eyes than you are. Seriously though keep em coming bro, and I hope u feel better.
It won’t help you shift any better. I bet you still stall out.
Bet
JK Gear and Gadgets you probably will this weekend. God I hope it happens I’ll laugh so hard.
Jeeping Adventurer “if you ain’t stallin you ain’t crawlin”
JK Gear and Gadgets we haven’t crawled in way to long. It’s like 36 hours stopped us from going again lmfao
185$ for the pair. No way Jose'
the word "upgrade" is used very loosely here
Lol yeah
I'm 2 seconds in only to say this is not a subject worthy enough for a video. WOW A SHIFT KNOB INSTALL!
I try to make videos on any mod I do, whether it’s small or big.
@@JKGearandGadgets of course you do since you get paid for it! But the point of channels like this should be to make relevant videos and ones that are actually teaching people something. I understand that you get free parts in exchange for making videos but I think a simple shout out would have been enough.
If you don't like his content, go watch somethin else.
@@allenwilson9656 nobody is asking for your opinion in this matter.
Allen Wilson no worries man. He made a good point and everyone’s able to have their own opinions. I took his comment as a compliment in a way, it’s cool to see that people are watching my videos with the intent to learn something. I started the channel for that reason, and I need to get back to making more Informative videos and true “how to’s”